Download or Print Catalog of LED lights, LED bulbs and LED Lamps for Low Voltage

Flexible Lighting

Rebaydo 2pcs LED Module 5 SMD 5050 12 VDC 1.2 Watt IP65

Product Code: 23461

Rebaydo 2 pcs LED module with 5 SMD 5050 chips producing up to approx. 80 lumens output. Operates at approx. 1.2 W on approx. 12 V DC with a long life of up to approx. 50,000 hours. Features a water-resistant design rated approx. IP65 and emits a white color temperature of approx. 6000K. Both wires are white, with the positive wire identified by grey stripes. Approximate dimensions are approx. 1.41 in × approx. 1.41 in with thickness approx. 0.21 in. Designed for signage lighting, accent lighting, backlighting, and other low-voltage LED applications. Ensure correct polarity during installation and use an appropriate 12 V DC power supply.

Flexible LED Light Strip 12 Volt DC 12" NCNR

Product Code: 65895

12 inches. Works with all cars and trucks. Water and shatterproof. Uses standard vehicle power (DC 12V). Available colors are Blue, Red, Green, White, and Yellow. The width is .32 inches and the diameter .060. The LED spacing is .069 inches. The light output is 40 lux per 12 inches. The 12 inches. Requires .26 Amps @13.8 VDC for 12 inches. Please apply heat using a hair dryer before installing. CE and Rohs.

Rebaydo 2pcs LED Module 4 5050 LED 12 Volt DC

Product Code: 52342

Rebaydo 2pcs LED Module 4 5050 LED 12 Volt DC. Each module uses .96 Watts. The +12V wire is white. The ground wire is gray. Long life up to 30,000 hours. 120 degree viewing angle. Available in Warm White 3000K. The shell color is white. The approximate size is 35 * 35 * 5mm. The approximate module to module spacing is 2.75". The approximate hole to hole spacing is 1.175". The approximate mounting hole diameter is 0.125". Comes 20 modules per string unless cut to size. The module is protected with a conformal coating. Each led chip can output up to 19 Lumens. The module has a Lumen output up to 76 Lumens. The module starts to illuminate around 5.30 volts. The approximate current consumption at 5.30 volts is 0.0003 amps per module. Each module uses approximately 0.96 watts. The approximate current usage at 12.00 volts is 0.076 amps per module. The shell is made from PVC.

LED Module High Power 0.72 Watt SMD2835 * 3 DC12V Beam 180 IP65 NCNR

Product Code: 26424

High power led module, uses three 2835 SMD leds. 12 Volt power, uses up to 1.25 watts. Up to 125 Lumen output per module. IP 65 rated. Viewing angle 120 degrees. CE & Rohs listed. .34 x .34 mm. Has two mounting holes. Each mounting hole is .110" in diameter. Spacing between modules 100mm center to center or about 1.4". Available in White 6000K. 6.5" spacing between modules. 20 modules per string. Modules are cut with 3.25" wire on each end. Modules are dim-able using a variable voltage supply. Each string is about 11 feet 4 inches in length. Each module uses .090 Amps @ 13.8 Volts DC. Each module is comparable to a 10 Watt incandescent bulb. Each module has 3M double stick tape. Each model is 1.71" L x 1.36" W x .38" D. We will try to cut to desired module quantity in a single string but may have to cut multiple strings to complete the order.

Flexible 12 Inch LED Low Voltage

Product Code: 49587

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. CE and Rohs certified. Each color has a different Lumen output, watt consumption, and current consumption. Available in white 6000 Kelvin, warm white 3000 Kelvin, red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600). You can use the flexible LED Lights with a standard 9 volt transistor battery. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. The flexible strip may also be cut down to size. There are cut marks that show where the flexible strip maybe cut. You cannot interlink, or connect end to end after you have cut the flexible strip down to size. These lights led strip are flexible and very bright.

Flexible 5050 SMD Water Resistant 12V 24 Inch

Product Code: 25451

This is a 24 inch 5050 SMT LED Water Resistant Flexible Light. This flexible light has 24 5050 SMT led’s. With an IP55 rating this product is water resistant. It has a flexible clear rubber sleeve to protect the led’s from the water. This product is low voltage and operates at 12V. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light is interlink able and has a unit wattage of 5.76 watts and a beam angle of 120 degrees and has 1 inch per led spacing. CRI is 75%. This product measures 24 inches by .40 inches. PLEASE NOTE: In order to connect multiple flexibles you need part number 42623, a flexible connector. These lights can be cut down to size, please note that when you cut the strip the end that has been cut cannot be plugged into any longer. Once the cut is made both sides will need to be independently hooked up to power.

Module 4 5050 3 Chip SMD 2 Side Mount Holes NCNR

Product Code: 58448

4 5050 3 Chip SMD Module with 2 Side mount Holes. This module has clear epoxy sealant to protect LED's from environment. Puts out up to 80 lumens and only uses .127 Amps of energy @ 13.8 Volt D.C. The Module is 12 Volt D.C. only. The module has both input and output wires so you can interlink them together. The module has double side adhesive foam so you can stick this module onto the surface. This product measures approximately 1.84 inches by 1.27 inches with a 0.15 in thickness. Adhesive backing measures 0.78 inches by 0.78 inches. There are 20 modules per segment. This item is an NCNR item.

Page 2

Flexible Lighting

Flexible Water Proof 24 Inch 1210 SMT 12 VDC Inter linkable

Product Code: 67484

This is a 24 inch 1210 SMT water proof flexible led light. With an IP68 rating this product is water proof and it has a flexible clear rubber sleeve to protect the led’s from the water. This flexible light operates at 12V and has a unit wattage of 6 watts. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light is very nice for underwater led lighting. This flexible light has a 120 degree beam angle and CRI of 75%. This product measures 24 inches by .35 inches. PLEASE NOTE: In order to connect multiple water proof LED flexibles you need part number 32454, an interlinking harness.

Flexible LED 5050 SMD LED Water Resistant 12 Volt DC 12 Inches

Product Code: 58758

This is a 12 inch 5050 SMD LED Water Resistant Flexible Light. This flexible light has 12 5050 SMD leds. **PLEASE NOTE**Strips come with different colored backing. Green, White, and Yellow have a Black backing. Warm White, Red, and Blue have a Gold colored backing. With an IP 55 rating this product is water resistant. It has a flexible clear rubber sleeve to protect the led’s from the water. This product is low voltage and operates at 12 V D.C. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light is can be interlinked to multiple flexible LED strips. The wattage of 2.88 watts and a beam angle of 120 degrees and has 1 inch per led spacing. Color rendering index C.R.I. is 75%. Very low power consumption. This product measures 12 inches by .39 inches. PLEASE NOTE: In order to connect multiple flexible you need part number 42623, a flexible connector.

5050 SMD Water Resistant Flexible 12 VDC 48 Inch

Product Code: 25456

This is a 48 inch 5050 SMD LED Water Resistant Flexible Light. This flexible light has 48 5050 SMD led’s. With an IP 55 rating this product is water resistant. It has a flexible clear rubber sleeve to protect the led’s from the water. This product is low voltage and operates at 12 Volt D.C. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light is interlink able and has a unit wattage of 11.52 watts and a beam angle of 120 degrees and has 1 inch per led spacing. CRI is 75%. This product measures 48 inches by .38 inches. PLEASE NOTE: In order to connect multiple flexible led lights you need part number 42623, a flexible connector. You can cut these lights to fit the size you need with cut marks on the back side. These lights can be cut down to size, please note that when you cut the strip the end that has been cut cannot be plugged into any longer.

Rebaydo 4pcs Connector 4 Conductor Black Flexible LED Light

Product Code: 42623

This Rebaydo 4-Conductor Black Flexible LED Light Connector is designed to link compatible 4-conductor flexible LED light strips end to end. Each package includes four connectors, allowing quick and secure connections without cutting, soldering, or modifying the LED lights. One connector will connect two cables. The connector features a black flexible body with a four-conductor pass-through design and contains no electronic components. It provides a direct electrical connection only and maintains continuity across all four conductors for reliable operation. Installation is simple and intended specifically for end-to-end connections between matching flexible LED light strips. Approximate dimensions are 0.39 inches in length and 0.38 inches in width. This connector is ideal for extending LED strip runs, making repairs, or creating custom lighting layouts.

Flexible LED Water Resistant 15 Foot 1 Reel 1210 SMT 12 Volt DC

Product Code: 56357

This is a 15 ft 1210 SMT water resistant flexible light. With an IP55 rating this product is water resistant. It has a flexible clear rubber sleeve to protect the led’s from the water. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light has a unit wattage of 24 watts and operates at 12V and has a beam angle of 120 degrees. CRI is 75%. This product measures 15 ft by .48 inches.

Flexible 24 Inch 1206 SMD 12 Volt DC

Product Code: 63459

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. CE and Rohs certified. Each color has a different Lumen output, watt consumption, and current consumption. Available in white (6000 Kelvin), warm white (3000 Kelvin), red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. Using a RGB controller, you can have sync color changing. Each 12" length uses 72mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). The flexible strip may also be cut down to size. There are cut marks that show where the flexible strip maybe cut.

Water Proof Flexible LED 1210 SMD 48 Inch 12 Volt DC

Product Code: 47526

This is a 48 inch 1210 SMT water proof flexible led light. With a IP68 rating this product is water proof and it has a flexible clear rubber sleeve to protect the led’s from the water. This flexible light operates at 12V and has a unit wattage of 12 watts. This product is available in white, red, green, blue, yellow amber, and warm white. This flexible light is very nice for outdoor led lighting for landscape, pool or hot tubs. Easy to install. This flexible light has a 120 degree beam angle and CRI of 75%. This product measures 48 inches by .46 inches. PLEASE NOTE: To hook up to power supply please use product number 32454. Comes with 4 rubber mounting brackets.

Page 3

Flexible Lighting

Flexible 48 Inch LED Light 1206 SMD Low Voltage 12 Volt DC

Product Code: 84578

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Approximate 3.5 watts or .91 watts per foot approximate for any color. Available in white 6000 Kelvin, warm white 3000 Kelvin, red 630 nm - 780 nm, green 500 nm - 570 nm, blue 420-470 nm and yellow or amber 570-600 nm and RGB. Using a RGB controller, you can have sync color changing. Each 12" length uses 72mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. Very low power consumption. Up to 24 feet of light can be illuminated with one 2 Amp power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). The flexible strip may also be cut down to size.

Rebaydo Puck LED Under Cabinet Light 12VDC 3 Watt

Product Code: 12855

Under-Cabinet LED Puck Light 12VDC. 3 Watt. This small puck light provides a very high and even light output. Uses 3 (1 Watt) high powered LEDs. It can be surface mounted or recessed mounted and is ideal lighting for kitchen cabinets, displays and furniture. Connect multiple puck lights with our 2-way or 3-way harnesses. The beam is approximately 120 degrees. The cord on each puck light is approximately 3 feet long. 120 degree beam angle. Up to 330 Lumens. Approx. 2.76" x 0.55". Available in 6000-6500K white and Warm White 3000K. Female plug 5.5mm and 2.1mm tip. The puck is held together by 3 Phillips screws. The face plate removes if needed for smaller diameter holes such as 2.28" diameter. The back has two recessed and hidden dog ears to mount screws it is hard to see in the picture. The led cabinet light is dimmable with a variable voltage supply. CE and Rohs.

Module 3 LED 5630 SMD 12VDC 1.2 Watt IP67

Product Code: 26435

Bad neon sign, use these 3 LED 5630 SMD modules to replace your old neon sign, no more buzzing, no more paying a repairman to make a new NEON sign, DIY, do it yourself. 80-85 Lumens output. Comparable to a 10 watt incandescent.

Flexible Water Proof 1210 15 Foot 1 Reel 12 Volt DC

Product Code: 26575

Water Proof Flexible LED Light. 1210 SMT. Low Voltage. 15 Foot. 1 Reel. 12 Volt DC. Low voltage 12 volts. Waterproof IP 68 listed. Assembled with a clear sleeve which protects the LEDs from water damage. Great for underwater or outdoor landscape use. 60 LEDs per meter. 300 LEDs per reel. 15 feet or 5 meters of the flexible strip. The flexible strip’s thickness measures .15 of an inch or 4.0 mm. Width of the LED flexible strip measures .38 of an inch or 9.8mm. 22 power watt consumption. The reel’s diameter is 6.94 inches or .18 of a meter. Open air ventilation. The flexible strip and reel have a combined weight of .29 kg. Operates from 5% to 95% relative humidity. 30,000 hours for LED life. 140 lux output at one foot. Each color varies slightly in wattage consumption and lux output.

Flexible 48 Inch RGB 1210 SMT LED Light Common Cathode Low Voltage

Product Code: 34545

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. Each 12" length uses 80mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are spaced 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). The flexible strip may also be cut down to size. There are cut marks that show where the flexible strip maybe cut. You cannot interlink, or connect end to end after you have cut the flexible strip down to size.

Flexible 48 Inch Red/Green/Blue 1210 SMD LED Light Common Anode 12 VDC

Product Code: 67342

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. This LED strip will work with any Common Anode controller. Each 12" length uses 80mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are space 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). The flexible strip may also be cut down to size. There are cut marks that show where the flexible strip maybe cut.

Flexible Side Firing LED Light 20 Inches / 12 Volt DC

Product Code: 83345

This is a 20 inch flexible side firing led light. This flexible light operates at 12V and has a unit wattage of 2.4 watts. With an IP55 rating it is water resistant. This flexible light has a 120 degree beam angle and has a forward lumen of 180L. CRI is 75%. This product measures 20 inches by .30 inches with a 58 inch connector cord. This flexible led light has an adhesive backing and is interlink able. PLEASE NOTE: In order to connect multiple flexibles you need part number 42623, a flexible connector.

Page 4

Flexible Lighting

Flexible Digital Water Proof 1/2-Meter 36 Inches NCNR

Product Code: 25645

Flexible LED Digital Light Water Proof 1/2 Meter 36 Inches. Uses a 5 volt power supply 84756 and special LED Light controller 73532. The LED Light can be squenced to chase colors. The flexible strip is water proof.

5050 SMD LED Water Resistant Flexible Lighting 12VDC 1 Reel 15 Feet

Product Code: 64584

5050 SMT LED Water Resistant Flexible Lighting Low Voltage. 1 Reel. 15 Feet. Low voltage. 12 Volts. Uses 7.2W per meter. 150 5050 SMD LEDs. Water Resistant IP55 listed. Assembled with a clear covering over LEDs to protect from water damage. Adhesive backing for easy placement. Not designed for underwater use. 30 LEDs per meter or 10 LEDs per foot. 150 LEDs per reel. 15 feet or 5 meters of the flexible strip. The flexible strip’s thickness measures .10 of an inch or 2.6 mm. Width of the LED flexible strip measures .38 of an inch or 9.8 mm. 36W. Frequency ranges from 50-60 Hz. The reel’s diameter is 6.94 inches or .18 of a meter. Open air ventilation. The flexible strip and reel have a combined weight of .20 kg. Operates from 5% to 95% relative humidity. 20,000 hours for LED life. CE and Rohs certified. White has a lumen output of 1800 and warm white with a lumen output of 1350. 3 chips per LED.

Flexible Side Firing LED 39 Inches

Product Code: 69348

Flexible Side Firing LED Light 39 Inches 12 Volt DC

Flexible 5050 SMD LED Water Proof 12V 24 Inch

Product Code: 89563

This is a 24 inch 5050 SMT LED Water Proof Flexible Light. With an IP68 rating this product is completely water proof. It can run under water and has a flexible clear rubber sleeve to protect the led’s from the water. This product is low voltage and operates at 12V. This product is available in white, red, green, blue, yellow, and warm white. This flexible light is interlink able and has a unit wattage of 4.32 watts and a beam angle of 120 degrees and has 1 inch per led spacing. CRI is 75%. This low voltage flexible light is great for under water led lighting effects. This product measures 24 inches by .46 inches. PLEASE NOTE: In order to connect multiple water proof LED flexibles you need part number 32454, an interlinking harness.

Waving Infrared Sensor Switch 12-24VDC 5.5mm Connectors

Product Code: 35987

Waving Infrared Sensor LED Light Switch 12-24VDC. The two infrared sensors are at the top of the controller. Uses only 3A. 36 watt output at 12VDC, and 72 watt output at 24VDC. Input wire measures ~3.94" and output wire ~ 7.87". Switch measures ~ 1.21" x 0.34" x 1.50". Great for LED cabinet lights, Desks lamps and much more. Wave your hand in front of sensor within 6 inches to turn on. To turn off wave you hand in front of the sensor within 6". If you stop waving your hand in front of the sensor , the sensor will twinkle 3 times. Sensor sensitivity range up to 6 inches. 5.5mm female input Connector and 2.5mm male output connector. Input cable about 4" long. Output cable about 8" long.

LED Module 5 SMD Plastic Waterproof 12 Volt DC NCNR

Product Code: 45896

LED Module 5 SMD. Made of Plastic. Waterproof. 12 Volt D.C. This waterproof module comes with two mounting brackets for easy installation & a metal casing. Approx. Up to 90 lumen output. Uses 0.339 Amp @ 13.8 Volt D.C. This light measures at it widest points Approx.~ 3.38 Inch x 0.56 Inch x 0.25 Inch. Available in white 6000K only. NCNR. This led module is dimmable with a variable voltage supply. The voltage range is 8.33 Volts to 13.8 Volts. CE and Rohs. The white wire is ground and the grey wire is 8 to 13.8 Volts. Long life up to 30,000 hours.

3 5050 SMD LED Module 12VDC NCNR

Product Code: 58976

3 5050 SMD LEDs module. Input: 12VDC. Very Low Profile for narrow openings. Great for stair cases and interior automobile decorative lighting. Output 0.070A @ 12VDC. Approx.: 60 lumen output. 2.94" X 0.44" X 0.13" Available in white only. NCNR

Page 5

Flexible Lighting

Rebaydo Flat LED RGB Flexible Rope Light Common Anode 12 Volt DC NCNRNW

Product Code: 68497

Rebaydo 2 pcs Flat LED RGB Rope Light – 12V DC | Common Anode | 180° Beam. Sold per meter/ 3 foot. Designed for low voltage 12 Volt DC systems, featuring red, green, and blue LEDs with a total of 108 LEDs per meter (36 LEDs per color per meter) in a flexible flat rubber body construction. The strip provides a wide approx. 180° beam angle, luminous efficacy of approx. 14–80 lm/W, CRI approx. 80Ra, and is IP65 rated for indoor or outdoor use. Cuttable design with marked intervals when purchasing over approx. 3 feet; maximum continuous run approx. 22 feet without repeater. Dimensions are approx. 12 mm × approx. 22 mm. Rated for 12 Volt DC, current draw at 12V approx. 0.27A for red, approx. 0.13A for green, approx. 0.13A for blue, and approx. 0.54A for all colors combined, frequency approx. 50–60Hz. CE, RoHS listed.

3 3528 SMD Waterproof LED Module 12VDC Dimmable NCNR

Product Code: 69369

3 3528 SMD LEDs Water resistant module. Input: 12VDC. Great for stair cases and interior automobile decorative lighting. Comes with an adhesive backing and 2 mounting holes. Output 0.036A @ 12VDC. Up to 27 lumen output per module. 1.94" X 0.44" X 0.19" Available in white only. These lights led's are created for long life up to 30,000 hours. The viewing angle is 120 degrees. Comparable to a 4 to 9 Watt incandescent. There are 20 in a string but the modules will be sold 1 or more depending on how many you order. This item is a Non Cancelable, Non Returnable NCNR item. Each module has mounting holes .121" in diameter and spaced approximately 1.75" apart. Dimmable range from about 7.90 Volts to 13.8 Volts. Please connect ground to the white wire and plus 8-13.8 Volts to the gray wire. You can connect power to the wires that are on either side of the module.

LED Rope Light 1/2" Diameter 12 VDC Per Foot NCNRNW

Product Code: 89902

LED Rope Light 1/2 Diameter. The rope light uses .35 Watts a foot, 35 watts at 100 feet. Also it has an Ingress Protection Rating IP of 65. The rope has a diameter of 0.5" diameter. The LED rope can be powered by 12V DC. Body Type: Rubber. Luminous Efficacy: 50-80LM/W. Beam angle: 180 Degrees. Please order a Rope Light Power Harness (product code: 83745) so you can illuminate your LED rope using low voltage. Sold and cut by 1 foot increments. Can be used indoors or outdoors. CE & RoHS listed.

Module 3 LED 5630 0.72 Watt 12 Volt DC IP65 NCNR

Product Code: 95464

Uses only .72W@12, Puts out up to 75 lumens. IP65, Long life up to 50,000 hours, solid state, no broken NEON tube. No buzzing power supplies that Neon signs need, instant on/off.

Flexible 5050 SMT LED RGB Light 18 Inches / .5 Meter 12 Volt DC

Product Code: 38476

Flexible 5050 SMT LED RGB Light. 18 Inches / .5 Meter. Low Voltage. 12 Volt DC. Light output 80 lumens per color at 1 foot. This is a common anode product. The RGB 5050 flexible can be cut to the length desired, but the cut off piece will no longer function. Long life up to 30,000 hours. The flexible strip’s thickness measures .09 of an inch or 2.4 mm. There are 15 LEDs per strip. Width of the LED flexible strip measures .39 of an inch or 10.0 mm. Power watt consumption varies between colors. Operates from 5% to 95% relative humidity. Open air ventilation. Frequency ranges from 50-60 Hz. 20,000 hours of LED life. Variable DC. Dimmable. Adhesive backing for quick and easy placement of the led SMT 5050 RGB flexible. Available in RGB. Inter linkable flexible strips through a connector. Connectors are available for purchase.

Flexible Side Firing 15 Feet 5 Meter 12 Volt DC

Product Code: 83474

Flexible Side Firing LED Light. 12 Volt DC. One reel is 15 feet. Low Voltage. 60 LEDs per meter. 300 LEDs per reel. 15 feet or 5 meters of the flexible strip. The flexible strip’s thickness measures .08 of an inch or 2.1 mm. Width of the LED flexible strip measures .30 of an inch or 7.8mm. 15 power watt consumption. The reel’s diameter is 6.94 inches or .18 of a meter. Open air ventilation. The flexible strip and reel have a combined weight of .16 kg. Operates from 5% to 95% relative humidity. 30,000 hours for LED life. 190 lux output at one foot. Equipped with an adhesive strip on the back for easy placement. Available in white (6000k). Plastic reel housing. Great for outdoor/indoor parties, holidays, decorations, accent lighting, etc.

Module Injected 5630 SMD 3 LED 12VDC 0.72 Watt IP67 Water Proof NCNR

Product Code: 23511

LED module is injected molded with the LEDs, this makes the module more rugged against the environments, IP67 rated, submersion in water. Very bright up to 165 lumen output. Long life up to 50, 000 hours, replaces NEON tubing for signs or use to upgrade pagoda landscape lights.

Page 6

Flexible Lighting

2 3528 SMD Waterproof LED Module 12 VDC NCNRNW

Product Code: 68976

2 3528 SMD LED Waterproof module. Input: 12VDC. Very small and compact for getting lighting in those tight & hard to reach spaces. Comes with and adhesive backing for easy mounting. 0.023A @ 12VDC. Approx.: 20 lumen output. 1" X 0.31" X 0.19" Available in white only. Comes with wires on both sides of the module. You just have to connect 12 V to either side of the module and will light. If you have more than 1 module the will be connected together so you only have to connect power to either end of the modules. Modules come 20 to a string. This product is a Non-cancelable, Non-Returnable, No Warranty.

Flexible 3538 120 LED/m 9.6W/m 12VDC 120 Beam 5 Meter IP54

Product Code: 86484

Flexible Strip, 120 LEDs per meter, 9.6 watt per meter, 120 degree viewing angle, IP54 rated. 8mm wide, 12 volt d.c. CE and Rohs listed. 15 feet 1 meter reel. Available White 6000K, Warm White 3000K, Red(625nm), Green(526nm), Blue(464nm),& Yellow(594nm). Adjustable length, you are able to cut along designated cut marks to adjust light to the desired length.

5050 LED Module Water Proof RGB Common Cathode NCNR

Product Code: 98781

5050 LED Module Water Proof RGB Common Cathode. Use this Red,Green, Blue module for undercounter, bars, advertising, signs. Can change colors using our common cathode RGB controllers or use your own configuration. Puts out up to 65 lumens, and only uses .12 mA of energy @ 13.8 volts. Comes equipped with mounting hole in the center, colored wires in accordance to the LED color and a metal backing. 12 VDC. Approximate size is 1.32in x 1.32in x .15in.

Rebaydo 2pcs 5050 LED Module Water Resistant RGB Common Anode 12 VDC NCNRNW

Product Code: 76854

Rebaydo 2 pcs 5050 RGB LED Module Waterproof IP66 Common Anode 12V DC are designed for low voltage 12V DC lighting systems, using efficient surface mount LED chips to provide reliable illumination for signage, accent lighting, display cases, under cabinet lighting, and custom lighting applications. The modules feature IP66 waterproof construction for indoor and outdoor use, a durable body with metal backing, and a common anode configuration for use with compatible controllers, with wiring that supports multiple strings in parallel and a maximum of two strings connected in series. A complete string consists of 10 pairs (20 modules) with approx. 5.5 inches spacing between modules and approx. Approx. 110 inches total length for a complete string, using approx. 20 AWG wire, and wiring includes a yellow wire for 12V positive with remaining wires for red, green, and blue channels.

5050 SMT LED Water Proof Flexible Lighting 12V Interlinkable 48 Inch

Product Code: 67564

5050 SMT LED Water Proof Flexible Lighting Low Voltage 48 Inch. Enclosed in protective tube so the 48 SMD 5050 L.E.D.s do not get wet at all. 1 inch per led spacing. Low voltage, interlinkable. This 48in 5050 SMT flexible light has a unit wattage of 8.64 watts and operates at 12V. This product has an IP Class of 68 and a 120 degree beam angle. This product is available in white, red, green, blue, yellow amber and warm white. This product measures 48 inches by .15 inches. PLEASE NOTE: In order to connect multiple water proof LED flexible you need part number 32454, an interlinking harness. Up to 1000 Lumen output.

Module 1 5050 LED 12 VDC Dimmable 120 Viewing

Product Code: 84674

1 LED 5050 module. 12 volt D.C., 120 degree viewing angle, double sided tape on back for easy mounting, clear epoxy coating on front to protect LED, CE and Rohs listed. Uses 0.24Watts or 20mA @ 12VDC. Water-resistant operation, IP65 rated. Expected life is =50,000 hours. Measures .88" long, .56" wide, and .35" thick. Dimmable range 8 Volts to 13.8 Volts. Up to 16 Lumen output per module. Comparable to a 2 Watt incandescent bulb but only uses approximately .24 Watt @ 12 VDC. The grey wire is for plus 8 to 12 Volts. The white wire is for ground. You can use the wires on either side of the module. Comes 20 to a string. You can order the desired modules.

Flexible Water Proof 12 Inch 1210 SMD 12 VDC

Product Code: 34533

This is a 12 inch 1210 SMT water proof flexible led light. This product is water proof and it has a flexible clear rubber sleeve to protect the led’s from the water. This flexible light operates at 12V. This product is available in white, red, green, blue, yellow amber, and warm white. This product measures 12 inches by .46 inches. PLEASE NOTE: In order to connect multiple water proof LED flexibles you need part number 32454, an interlinking harness.

Page 7

Flexible Lighting

Flexible LED Kelvin Changing 1 Meter 24 Volt DC

Product Code: 23466

L.E.D. Flexible strip. Changes from daylight white 4000K to white 6000K. 24 volt DC, extremely bright. Uses the latest 2835 SMD chip with high CRI. Long life up to 30,000 hours. Uses both wires and solder less connection. Measures 1 Meter long (about 3 feet) and 10 mm wide. 120 degree viewing angle. 36 LEDs per foot, 120 LEDs in all. LED spacing is 5.5mm. Sticky backing for easier installation. Great for under cabinet lighting, accent lighting, and RV lighting. Uses 14.4 LED watts per meter.

Module 3 LED 5050 Mounting Holes 12VDC IP65 .72 Watt

Product Code: 32651

3 5050 LED Module, 12 volt DC, spacing about 2.5 inches. Uses .72 watts equivalent to a 5 watt incandescent bulb. 120 Degree Viewing angle. Clear epoxy covering LEDs for IP65 water resistance ( Not meant for full submersion). Screw mounting holes on either side and double sided sticky tape on the back for easy mounting. CE and Rohs listed.

5050 SMD LED Water Proof Flexible Lighting 12 VDC 15 Feet 1 Reel

Product Code: 34623

5050 SMT LED Water Proof Flexible Lighting 15 Feet 1 Reel competely water proof. IP68 rated. 1 inch per led spacing. Low voltage 12 Voltgs. 150 SMT 5050 LEDs. This 15 ft Water Proof 5050 SMT flexible light has a unit wattage of 36 watts. This product is low voltage and operates at 12V. There are 150 SMT 5050 LEDS. This product has a beam angle of 120 degrees and a CRI of 78%. This product is available in white, red, green, blue, yellow amber and warm white. This product measures 15 feet by .48 inches.

Module LED Rectangular Water Proof 3 Super Flux 12V DC Dim-able

Product Code: 67544

LED Channel Module Rectangular Water Proof 3 Super Flux 12V DC dim-able low voltage. Equivalent to a 5 watt bulb. Very nice water proof LED module. Rectangular design, with mounting tabs. Great for NEON light replacement. Available in white 6000K only. Comes 30 to string unless already been cut. Approximate size is 3.07in x 1.30in x .50in. The white wire is +12v, the grey wire is ground. Uses approximately .0175 amps at 12.00 volts.

Flexible 24 Inch Red/Green/Blue SMT 1210 LED Light Common Anode

Product Code: 94567

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. For the other RGB controllers use the common Anode RGB Strips and you can have sync color changing. Each 12" length uses 80mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are space 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). Great for outdoor/indoor parties, holidays, stage and other decorations, accent lighting, landscaping, special events, etc.

4 3528 SMD Iron Shell Waterproof LED Module 12VDC 180 Beam NCNR

Product Code: 32569

4 3528 SMD LEDs Waterproof Iron Shell module. Input: 12VDC. 180 degree viewing angle. Great for stair cases and interior automobile decorative lighting. Comes with 2 side mounting holes and 1 center mounting hole. Output 0.048A @ 12VDC. Approx.: 70 lumen output. Available in White 6000K. 1.31" X 1.75" X 0.38" Available in white only. NCNR

5050 SMT LED Water Proof Flexible Low Voltage 12V Interlink 12 Inch

Product Code: 47653

This is a 12 inch 5050 SMT LED Water Proof Flexible Light. With an IP68 rating this product is completely water proof. It can run under water and has a flexible clear rubber sleeve to protect the led’s from the water. This product is low voltage and operates at 12V. This product is available in white, red, green, blue, yellow, and warm white. This flexible light is interlink able and has a unit wattage of 2.16 watts and a beam angle of 120 degrees and has 1 inch per led spacing. This product measures 12 inches by .84 inches. PLEASE NOTE: In order to connect multiple water proof LED flexibles you need part number 32454, an interlinking harness.

Page 8

Flexible Lighting

Flexible 12 Inch Red-Green-Blue 1210 SMT LED Light Common Anode

Product Code: 78453

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. The common annode only works with a RGB controller 42363 only. For the other RGB controllers use the common Anode RGB Strips and you can have sync color changing. Each 12" length uses 80mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are space 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller (74324). The flexible strip may also be cut down to size.

Flexible LED 12 Inch Red Green Blue 1210 SMD Common Cathode

Product Code: 46574

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. Red 630 nm to 780 nm, green 500 nm to 570 nm, blue 420 to 470, yellow-amber 570 to 600, and RGB. The common cathode only works with a Red Green Blue common cathode controller such as 42363. Each 12" length uses .080 Amp of current at 12 Volt D.C. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are space 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2 Amp power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater 54324 or controller 74324. Great for holidays, stage and other decorations, accent lighting, special events, outdoor/indoor parties, etc.

Electronic Digital Flexible Water Proof LED Light 5 VDC 5 Meter NCNR

Product Code: 85365

Digital Electronic Flexible LED Light. Inter linkable, so you can connect this digital LED light in series with other digital LED strip lights and they will be in sync. The LEDs can be chased electronically and individually because the flexible strip. Need Electronic Flexible Controller to operate the Electronic Flexible strip. The Digital Electronic Flexible Strip also requires a 5 volt DC power supply such as part number 84756. Approximate size is 5 Meter length. x .67in with 1ft of loose wires for easy installation.

Water Proof Module Round RGB Common Anode 12 Volt AC/DC NCNR

Product Code: 97865

Water Proof Module Rectangular RGB Positive Anode 12 Volt AC/DC LED Light. Great for NEON sign replacement. Long life, low power consumption. Low cost LED power supply. Approximate size is 1.90in x 1.10in x .42in.

Water Proof Module Rectangular RGB Common Anode 12 Volt AC/DC NCNR

Product Code: 84953

LED Water Proof Module RGB Positive Anode Voltage AC/DC LED Light. Red, green and blue dome type LEDs. Low voltage very bright. Can be used with all RGB positive anode controllers. Very nice replacement for NEON signs. Approximate size is 3.08in x 1.25in x .42in. IP Class: 65. CE and RoHS listed. Lens Type: No lens. Luminous Efficacy: 80lm/w. Lumen maintenance: 80%. Beam angle: 120 Degrees. Number of LEDs: 9. LED Watts: 0.06 W. Unit Watts: 0.5 W. CRI: 70. Approximate 17ma per module. The yellow wire is the common anode, please apply +12 Volt to this wire. The green wire is for the green led's, please apply a 0 Volts to this wire to make the green led's light. The red wire is for the red leds, please apply a 0 Volts to this wire to make the red led's light. The blue wire is for the blue led's, please apply a 0 Volts to this wire to make the blue led's light.

Flexible 5050 SMD 39 Inches

Product Code: 56879

Flexible 5050 SMT LED Light 39 Inches / 1 Meter Low Voltage 12 Volt DC. One inch between each LED. Light output 100 lumens at 1 foot. Can be cut to a different size. After cutting to size you cannot inter connect the flexible strip to the next one it would need to be the end piece. Very Bright product. Width of the LED flexible strip measures .39 of an inch or 10.0 mm. 8.18 power watt consumption. The flexible strip’s thickness measures .10 of an inch or 2.6 mm. Open air ventilation. Frequency ranges from 50-60 Hz. Operates from 5% to 95% relative humidity. 20,000 hours of LED life. 30 LEDs per strip. Adhesive backing for quick and easy placement of the led 5050 SMT flexible. CE and Rohs certified. Variable DC. Dimmable. Available in white (6000k). Great for outdoor/indoor parties, holidays, stage and other decorations, accent lighting, landscaping, special events, etc.

Flexible 24 Inch Red/Green/Blue LED Light Common Cathode Low Voltage

Product Code: 93456

Flexible LED Light has two sided tape so just remove and stick into place. The LEDs are spaced at 1 per inch. Each color has a different Lumen output, watt consumption, and current consumption. red (630nm-780nm), green (500nm-570nm), blue (420-470), yellow/amber (570-600), and RGB. The common cathode only works with Using a RGB controller 42363 only. Each 12" length uses 80mA of current at 12 VDC. You can use the flexible LED Lights with a standard 9 volt transistor battery. The LEDs are space 1 inch apart. Very low power consumption. Up to 24 feet of light can be illuminated with one 2A power supply. The flexible strips can be interconnected together using the connector. Very low profile. Up to 60 feet for RGB repeater (54324) or controller(74324). The flexible strip may also be cut down to size. There are cut marks that show where the flexible strip maybe cut.

Page 9

Flexible Lighting

Round LED Rope Lighting End Terminator NCNRNW

Product Code: 67546

Round LED Rope Lighting End Terminator. Use this LED rope light terminator to properly end your led rope light. This will fit the 1/2 Round LED Rope Light.

Flat Rope LED Light Terminator NCNRNW

Product Code: 42755

Flat Rope LED Light Terminator. Approximately 0.92" by 0.45" by 0.96". Use this 4 wire flat led rope terminator for a professional look. This is an NCNRNW item. Perfect fit for our flat rope LED light.

Page 10

G4

G4 GY6.35 JC 18 SMD 3528 LED Lamp 12V DC G4 Base

Product Code: 34635

G4 18 SMD 3528 LED Lamp. has 18 3528 SMT LEDs. The design allows for LED Light emitting forward firing. Uses only 1.2 watts, comparable to a 10 to 15 Watt halogen bulb. 12 Volt DC. This LED measures approximately 1.46 inches by 1.17 inches. Up to 130 Lumen output. Dimmable with a variable voltage supply. 120 degree viewing angle. Long life up to 30,000 hours. CE and Rohs.

G4 GY6.35 6 SMD RGB Color Changing 12V AC or DC

Product Code: 34754

G4/GY6.35 6 SMT RGB Color Changing LED Light Bulb Low Voltage AC/DC 12 Volts. G4 will cycle through colors red, green and blue and combination of all 3 by itself. 140 Lumen output. Cycle time approximate 7 seconds, each color 2 seconds. This LED measures from top to bottom 1.62in, with a width of .39in and a diameter of 1.17in.

G4 GY6.35 JC Super Flux 4 12 Volt AC-DC

Product Code: 43243

40 Lumen output. 10W Halogen equivalent. 1.5 Watts power consumption. 120 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 60 Degree viewing angle. GX4.0 base. Operating voltage 12V AC 12V DC. This LED measures approximately 1.31 inches by 0.99 inches by 0.56 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. G4/JC/GY6.35

G4 G6.25 JC 1.8 Watt 360 Degree 12 Volt AC-DC Dimmable

Product Code: 45616

G4 1.8 Watt 360 Degree illumination. Operates 12V AC-DC. 24 SMD 3014 LEDs. G4 base. Small size fits in g4 socket better. long life up to 30,000 hours. Perfect for smaller areas that need illumination. Up to 180 Lumens output. Available in White (6000K) and Warm White (3000K). This G4 LED bulb uses approximately 1.8 Watts @ 12 Volt AC/DC. The diameter can vary from 0.34" to 0.4375". Dimmable range from 7.71 Volts to 9.5 Volts. The led's are completely encapsulated so they resist damage from the weather. Comparable to a 18 to 20 Watt incandescent bulb. CE and Rohs.

G4 G6.25 JC 2 Watt MCOB 12V AC-DC

Product Code: 68744

G4 2 Watt, L.E.D. M.C.O.B. technology, 360 degree illumination, CRI>80, Lumens up to 210. Weigth 3 grams. Works on both AC and DC. Dimmable with a variable AC-DC power supply. Long life up to 30,000 hours, available in white 6000K and warm white 3000k. PF 0.62, comparable to a 15-25 watt incandescent light bulb., Sdcm<6, very small diameter. Plastic lens and bottom with air holes in the top and bottom to allow air circulation.

G4 GY6.35 3.1 Watt DC10-30V AC10-18V Dimmable G4

Product Code: 34231

G4 GY6.35 21 SMD 2835 with aluminum body. Long life up to 30,000 hours. Approximate 185 lumens side firing and 255 Lumens forward firing. CRI>80. Uses .24 amps @ 13.8VDC. Approximately 25-30 watt incandescent equivalent. Dimmable with a varying power supply. Operates DC 10 to 30V and AC 10 to 18V. The g4 uses g4 or gx4.0 base. Metal body help led's last longer and brighter. Comparable to a 25-30 Watt incandescent bulb.

G4 GY6.35 2 Watt AC or DC 12V Dimmable G4

Product Code: 65748

G4 2.2 Watt High Power LED Light GX4.0 DC/AC 12V. 360 degree viewing angle. Up to 210 lumen output. Comparable to a 15-20 watt incandescent G4 bulb. CRI greater than 70. Measures 1.45 inches long and .45 inches wide. Works either 12 volt AC or DC. Availlable in white 6000-6500k and warm white 2800-3000K. Has 48 qauntity3014 smt led chips. Sealed with silicon material. GX4.0 base. 1/2" diameter and 1.45 inches long. Weighs 4.6 grams. The G4 bulb is dimmable with a variable dc power. The range is about 7.5 volts to 12 VDC.

Page 11

G4

G4 G6.25 JC 3 Watt 360 Degree 12 Volt AC-DC Dimable

Product Code: 84755

G4, 57 3014 SMD leds, uses only 3 watts, comparable to a 25-35 watt incandescent. Works with either 12 Volt AC or DC. CRI>70, up to 255 lumen output. With LEDs on top this bulb offers 360 degree illumination, G4 base type, long life up to 30,000 hours, power factor .7. Available in white 6000K and warm white 3000. Encased in silicone to protect LEDs and components from moisture. G4 bulb is dimable with a varying power supply, powering on at 7 volts and reaching full brightness at 10 volts.

G4 LED 2 Watt 120 VAC 360 Viewing

Product Code: 87944

G4 L.E.D. 2 Watt, 360 Degree illumination, 120 VAC, long life up to 30,000, CRI>80, Up to 180 lumen output, Power factor .336. CE and Rohs listed. Available in white 6000K and warm white 3000K.

G4 GY6.35 LED 1 Watt Dimmable Low Profile 12V AC-DC

Product Code: 67645

G4 L.E.D. Bulb. Low profile, looks like a G4 bulb, fit is most G4 fixtures, 360 Viewing angle, available in white 6000K and warm white 3000K. CE and Rohs listed. Low voltage 12 volts AC or DC. Long life up to 30,000 hours. Comparable to a 10 G4 incandescent. 0705 L.E.D., CRI>80, PF 0.62. Dimmable with a varying AC or DC power supply.

G4 GY6.35 1.4 Watt LED Bulb 12V DC

Product Code: 98447

G4 L.E.D. 14 SMD 3014. 1.4 Watt. 12 Volt DC, CRI>80, long life up to 30,000 hours, PF>.87, 360 degree illumination, available in warm white 3000K and white 6000K. For thin, low profile G4 applications.

G4 Ultra Bright 6 SMD 12 Volt AC/DC

Product Code: 35263

G4 52 Lumen output. Comparable to a 10 W Halogen equivalent. 1.1 Watt power consumption. 150 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 110 Degree viewing angle. GU4.0 base. Operating voltage 12V AC or 12V DC. This LED measures approximately 1.34 inches by 0.91 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Comparable to a 10 Watt incandescent bulb.

G4 GY6.35 JC 9 SMD 5050 3 Chip Forward Firing Low Voltage 12 V AC GX4.0

Product Code: 47654

G4 9 SMT 5050 3 Chip Forward Firing Low Voltage 12 V AC or 12V DC. Each 5050 smd has 3 led's. So this means that there are 36 led chips that light. This product allows the LED Light to be forward firing so you can place the G4 in the socket. This LED measures a diameter of 1.25in and .60in thick. Only consumes 3.3 watts of energy. Approx. 120 viewing angle. Up to 180 Lumen output. Comparable to a 20-25 watt bulb. Dim-ability this G4 is dimmable. Available in White 6000K and Warm White 3000K. Please make sure your power supply will power this low powered led lamps, if not please purchase a LED Light approved power supply. CE and Rohs.

G4 GY6.35 JC 3 Watt Ceramic Shell 12V AC DC 360 Degree G4

Product Code: 74375

12 Volt ac or dc. MCOB 3 watt LED. Plastic lens for 360 degree illumination. Approximately 220 lumens. GX4.0 Base. 1.47 inches in length and .55 inches in width. Ceramic shell for long life and durability. Plastic lens. Dimmable with a varying power supply. Comparable to a 25 watt incandescent equivalent.

Page 12

G4

G4 3 Watt 64 LED 12V AC/DC Dimmable

Product Code: 34155

G4 3 Watt 64 3014 SMD LEDs. 360 degree illumination. Long life up to 30,000 hours, up to 250 lumen, Low voltage 6-12 volts AC or DC. CRI>70. up to 75 lm/watt. Made of injection clear GEL. 25 to 30 watt incandescent equivalent. Dimmable with a varying power supply. Uses approximately 250 mA. See product detail for warranty period. This led bulb is dimmable by a variable voltage supply. Dimming range starts about 9 Volts to 12 Volts.

G4 JC GY6.35 9 SMD 1.8 Watt 12 Volt DC

Product Code: 47569

G4/JC 9 SMT 5050 (3 Chip) LED Lamp. 12 Volt DC. GX4.0 Base. This G4 is very nice has both side firing and forward firing LEDs. Uses 1.8 Watts, comparable to a 10 to 15 Watt Halogen light bulb. This product measures approximately 1.21 inches by 0.41 inches. The warm white is a 1/8th of a inch taller. Viewing angle 360 degrees.

Ultra Bright G4 LED Bulb 9 SMD 12 Volt AC/DC Dim-able

Product Code: 85529

Ultra Bright G4 LED Bulb. Up to 240 Lumen output. This is a G4 bi pin. Spacing of the pins if 4mm. Comparable to a 25W Halogen bulb. Only uses 2 Watts of power consumption. 180 mA current consumption. Available in white 6000-6500 Kelvin or warm white 3000-3500 Kelvin. Long life of up to 30,000 hours. 120 Degree viewing angle. This G4 measures approximately 1.50 inches by 1.15 inches by 0.35 inches. Heat sink design to maximize LED life. No ultraviolet (UVA, UVB) or radio frequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Great for marine use or track lighting. Has thick heat sink to keep the leds cooler so they last longer. Saves 90% energy. This bulb is dim-able. CE and Rohs.

G4 GY6.35 1.85-Watt High Power LED 12V AC-DC

Product Code: 98884

G4 Round MCOB 1.85 Watt bulb, Up to 110 lumen output, long life up to 30,000 hours, 180 degree viewing angle, 12 volt AC or DC. CRI>75, The G4 pins are on the back side. Nice metal to cool the MCOB. Available in white 6000K and warm white 3000K. This G4 is also called foward firing, since the pins are on the back side.

G4 GY6.35 JC 16 (3 Chip) 5050 LED Bulb 12 Volt DC GX4.0 Base

Product Code: 48712

G4 GY6.35 16 (3 Chip) 5050 LED Light Bulb. 16 5050 SMT Chip for a very bright G4 LED Lighting. Uses 3.2 Watts of power comparable to 25 to 30 watt light bulb. Viewing angle 120 Degrees. 210 Lumen output. CR=65. GX4.0 Base.

G4 JC GY6.35 LED Bulb 2 Watt Low Voltage GX4 BASE DC8-30VDC AC10-18V

Product Code: 12476

2 Watt, 2835 SMD, G4, JC/Gy6.35. Uses only 2 watts, but very bright using 2835 SMD chip. Wide voltage DC8-30V/AC10-18V. Dimmable. GX4.0 Base. UP to 140 Lumen output.

G4 GY6.35 JC 12V DC 360 Degree 5 SMD 5050

Product Code: 25623

65 Lumen output, uses only .8 watts, CRI>80. 12 Volt DC. Comparable to a 5-8 watt incandescent bulb. Low cost G4 LED Lights. Uses 5 5050 SMD, GX4.0 Socket. Uses only 0.8W@12VDC yet puts out 65 lumen output of light in 360 degrees. Long life, vibration resistant. Uses GX4.0 Base. Available in white 6000K and warm white 3000K. Measures .42" wide and 1.19". Dim-able with a variable DC power supply. 360 degree viewing angle.

Page 13

G4

G4 GY6.25 JC 21 SMD 3528 LED Light Bulb 12V DC GX4.0 Base

Product Code: 34567

G4/JC 21 SMD 3528 LED Light Bulb. Low voltage 12 Volt D.C. Has 21 3528 SMT LED's. This LED Light only uses 1.2 Watts. Comparable to a 10 to 20 Watt Halogen Light bulb. Up to This LED measures approximately 1.40 inches by 1.33 inches with a 0.11 inch thickness. Up to 150 Lumen output. 120 degree viewing angle. Dimmable with a variable voltage source. Long life up to 30,000 hours. CE and Rohs.

G4 GY6.35 JC 360 Degree 18 SMD 5050 12 VDC

Product Code: 64523

G4 360 Degree 18 SMT 5050 3 Chip Low Voltage. Uses 250mA. Light output 270-280Lm. This LED comes equipped with 3 forward firing and 15 side firing LEDs for a higher brightness intensity. Low Voltage LED Light 12 Volt DC. This G4 measures approximately 1.78 inches by 0.57 inches by 0.72 inches.

3528 LED G4 Bulb 12V DC

Product Code: 68544

3528 led G4 bulb. GX4.0 Base. 12 V D.C. This light uses 1.5 Watts. Comparable output of 15 to 20 Watt Halogen bulb. This product measures approximately 1.33 inches by 0.46 inches. Similar shape of the original halogen lamp. Long life up to 30,000 hours. Dim-able using a variable voltage supply. Great for boats. Save energy by upgrading your old G4 with new led. Helps cool down the cabin room and save 90% energy use. Available in White 5500-6500K or Warm White 2500-3500K. There can be either 1 or 2 leds at the top of the G4 bulb. CE and Rohs.

G4 GY6.35 12 5050 SMD 3 Chip LED Dimmable

Product Code: 65487

JC G4 12 5050 (3 Chip) SMD LED Light 12 VDC Low Voltage Very bright G4 uses 12 SMT LEDs. 12-30 VDC. This LED measures from top to bottom 1.63in, with a width of .31in and a diameter of 1.21in. Available in white and warm white. 4 watts, equivalent to a 30 watt incandescent. Fully dimmable with a variable power supply.

G4 JC GY6.35 1.2 Watt 6 SMD LED 12V AC-DC

Product Code: 78744

G4 JC GX6.35 6 SMD 3 Chip LED 12V AC/DC GX4.0 Side Firing. Use this side firing ( Pins go out side . Low voltage 12V AC or DC. Long life up to 30000 hours. Low power consumption. Nice white plastic body. Up to 80 lumen output.

G4/GY6.35/JC 9 SMD 5050 (3 Chip) 360 LED Lighting 12V GX4.0 Base

Product Code: 47659

G4/JC 9 SMD 5050 (3 Chip) 360 LED Lighting. Use this G4 with 1 5050 forward firing and 8 side firing 5050 LEDs. Only uses .09mA @ 13.8 AC/DC.This product looks very nice in G4, MR11 and MR16 fixtures. Available in white and warm white. Approximate size is 1.32in x .42in. Uses 1.8 Watts, comparable to a 10 to 15 Watt Halogen light bulb.

G4 GY6.35 JC Super Bright 21 LED 12 Volt AC DC G4

Product Code: 53894

40 Lumen output. Comparable to a 5W Halogen. 1 Watt power consumption. 90 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 50 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This G4 measures approximately 1.49 inches by 1.23 inches by 0.40 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. GY6.35/JC/G4

Page 14

G4

G4 JC GY6.35 9 SMD Low Voltage 12 Volt DC Dimmable

Product Code: 87962

G4/GY6.35 9 SMT Low Voltage 12 Volt DC. Each SMT LED has 3 LED chips. The G4 base is GX4.0. The G4 LED can operate 12 Volts DC. Very long life. This LED measures approximately 1.40 inches by 1.18 inches with a 0.12 inch thickness. Dimmable with a variable voltage supply. Up to 150 Lumen output. Long life up to 30,000 hours. Comparable to a 10-20 Watt incandescent bulb. 120 degree viewing angle. CE and Rohs.

G4 GY6.35 JC 14 LED 12 Volt AC-DC

Product Code: 34534

30 Lumen output. Comparable to a 3W Halogen. 0.8 Watt power consumption. 70 mA current consumption. Available in white 6000 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 110 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This G4 measures approximately 1.29 inches by 0.99 inches with a 0.43 inch thickness. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package.

G4 GY6.35 1.5-Watt High Power LED 12V AC-DC

Product Code: 45178

1.5 Watt G4 side firing LED Light. Gx4.0 base, 180 degree viewing angle. 12V AC or DC. Up to 80 lumen output. Available in white 6000-6500K and warm white 2800-3000K. Weighs 6 grams.

G4 GY6.35 JC Ultra Bright 1 Watt LED 12 Volt AC DC G4 Base

Product Code: 54334

80 Lumen output. Comparable to a 15W Halogen. 1.8 Watt power consumption. 110 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 120 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. 1.10 inch diameter x 1.53 inch height. Heat sink design to maximize LED life. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package.

G4/JC/GY6.35 9 SMT (3 Chip) L.E.D. Side Firing LED Light 12VDC GX4.0

Product Code: 78643

G4/JC 9 SMT (3 Chip) L.E.D. Side Firing LED Light. 140 lumen output and only uses .13 mA @ 13.8 VDC. Comparable to a 25-30 watt halogen equivalent. This is a great product for JC or G4 replacement LED lamp. This LED measures from top to bottom 1.62in, .34in thick and a diameter of 1.16in. The operating voltage range is 12.8V AC or DC

G4 9 SMD 1201 LED Bulb 12V

Product Code: 45674

9 1201 SMT LED G4 JC GY6.35 LED Light Bulb Low Voltage. Very nice 9 SMD 1201 LED G4 Product. 12 VDC. This LED measures 1.29 inches by 1 inch. Available in white and warm white.

G4 GY6.35 JC 24 SMD Ultra Bright 12V Dimmable

Product Code: 18634

24 3528 SMD LEDs. Very Bright, up to 100 Lumen output. 12 Volts AC or DC. Uses only 0.08 Watts of energy and compares to a 20 to 30 Watt halogen bulb. This LED measures from top to bottom 1.52in and a diameter of 1.10in. GX4 base. JC and G4 are standard names for this product. Available in white and warm white. IP Class: 20. Ventilation: 85%. Weight: 12g. CE and RoHS listed. Luminous Efficacy: 52LM/W. Lumen maintenance: 75-100LM. Beam angle: 120 Degrees. Number of LEDs: 24PCS. LED Type: 3528 SMD. Unit Amps: 380mA. LED Watts: 0.2 W. Unit Watts: 1.9W. Forward Lumen: (DW) 100LM. (WW) 81.3LM. Kelvin: (DW) 559 K. (WW) 582 K. Dimmable with a dc voltage variable power supply.

Page 15

G4

G4 GY6.35 JC Super Flux 1 LED 12 Volt AC-DC G4 Base

Product Code: 72253

10 Lumen output. 1W Halogen equivalent. 0.2 Watt power consumption. 30 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. 50,000 hour life. 60 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. 0.35 inch diameter x 0.70 inch height. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. GY6.35/JC/G4

Page 16

General Bulb

LED Bulb 12 Watt 12 Volt E27 NCNRNW

Product Code: 32161

12 Watt led bulb. Low voltage 12 volt AC or DC operation, E27 base. Up to 1200 lumen output. 95 watt incandescent equivalent. long life up to 30,000 hours. Available in white 6000K and warm white 3000k. CE and Rohs listed. Great for off the grid, solar and remote uses. The item is tested before shipped. The product is NCNRNW because it is easily inserted into 120 volt socket and destroys the low voltage bulb.

LED Bulb 9 Watt 12 Volt AC/DC E27 NCNRNW

Product Code: 24614

9 Watt low voltage LED Bulb. 70 watt incandescent equivalent. Low Voltage 12 Volts, long life up to 30,000 hours. CE and Rohs listed. Available in white and warm white. Great for off the grid, solar or remote applications. E27 base, up to 900 lumen output 360 degree. Aluminum material-champagne color, high heat dissipation efficiency, fogged glass globe, elegant appearance. This bulb is designed for 12 volt AC or DC applications. The reason this is a NCNRNW item is because it is easy to screw into a normal E27 socket that is wired for 120 VAC. Every bulb is tested before it is shipped.

PAR38 Ultra Bright LED 12 VAC E26 NCNRNW 30 Degree

Product Code: 79567

IP Class: 54. Weight: 390G. CE and RoHS listed. Luminous Efficacy: 80lm/w. Lumen maintenance: 80-90%. Forward Lumen: 480-500Lm. LED Watts: 0.06 W. Unit Watts: 6W. CRI: 70. Comparable to an 60 Watt Incandescent floodlight. Available in white 6000 Kelvin. Long life of up to 60,000 hours. 30 Degree viewing angle. PAR38 Ultra Bright LED Light with 108 LED's.E27 screw in base. Operating voltage 12V AC or 12V DC. 4.84 inches diameter x 5.56 inches height. PAR38 Ultra Bright LED Light series with super bright T5 LEDs. For indoor and outdoor use. Clear lens. Glass assembly. This LED Light has a dimmability of 0 to 60 percent. Perfect for outdoor LED flood lighting, security LED Lighting, party LED Lighting, decorative LED Lighting, plant grow lights, greenhouses, landscaping and other indoor and outdoor uses. One per package.

Bulb LED 15 Watt 12 Volt Dimmable NCNRNW

Product Code: 79845

15 Watt L.E.D. Bulb. 360 Degree illumination. E27 Base, low voltage 12V AC or DC. White 6000K up to 1300 lumen output, Warm White 3000K up to 1170 Lumens. Available in white 6000k and warm white 3000K. Non cancelable non returnable no warranty. 120 watt incandescent equivalent. This bulb is dimmable with a variable power supply. 360 Degree illumination. Long life up to 30,000 hours. CE and Rohs.

Rebaydo PAR38 10 Watt 12 Volt AC/DC E27 Diffused 120 View Dim-able NCNRNW

Product Code: 77540

Par38, diffused Lens. E26 or E27 medium screw base. 12 Volt AC or DC, low voltage. 10 Watt. White 6000 kelvin, Warm White 3000K. Approximately 1000 Lumen output. 120 degree viewing angle. Comparable to a 75 watt incandescent light bulb. IP65 rated. CRI>80. CE and Rohs listed. The LED bulb has E26 / E27 base which is the same base. Rated life up to 30,000 hours. This bulb is dim-able by varying the voltage supply. The White 6000K is about 5% brighter than the Warm White 3000K. NCNRNW means Non cancelable, No warranty, Not returnable. The reason for NCNRNW it is a 12 Volt product and will be destroyed is screwed into a 120 VAC socket. Great for applications around water such as boat dock lighting, landscape lighting.

Par 36 9 Watt 10-30 Volt Diffused Lens Screw Terminal G53

Product Code: 79477

Par 36 9 Watt L.E.D.. Uses 60 2835 smd leds, viewing angle 120 degrees, Up to 900 lumen output, Water proof IP 65 rated. Available in white 6000mK and warm white 3000 K. Low voltage uses only 12-30 volts AC or DC. Screw Terminal G53, CE and Rohs.

Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW

Product Code: 87756

280 Lumen output. Comparable to a 30-35 Watt incandescent. 3.6 Watt power consumption. 300 mA current consumption. Available in white 6000-7000 Kelvin or warm white 2800-3300 Kelvin. Long life of 50,000 hours. 30 Degree viewing angle. E27 screw in base. Operating voltage 12 Volt A.C. or 12 Volt D.C. only, not for 120 VAC. 1.95 inches diameter x 2.91 inches height. No ultraviolet UVA, UVB or radio frequency RF energy. Can be dimmed with a variable AC or DC voltage supply. One per package. 30 degree viewing angle. Dim-able with a variable voltage supply. This bulb is dim-able with a variable voltage supply. CE and Rohs.

Page 17

General Bulb

Recessed LED Fixture 12 VDC

Product Code: 43535

Recessed LED Fixture 12 VDC. Available in warm white 3000K. 20 forward firing LEDs, 135 lumen output and a 60 degree viewing angle. 12 VDC. This LED measures approximately 2.26 inches by 8.71 inches with a 0.95 inch thickness. Uses 300mA @ 13.8 VDC. 4.1 Watts power consumption. Equivalent to a 40 watt light bulb. Has mounting clips to secure from the inside. Can be mounted up to .16" sheet metal. Has a glass lens.

PAR 36 5 Watt 12 Volt AC or DC Diffused Screw Terminal G53

Product Code: 48677

PAR36 LED Light Bulb 126 LEDs 10-30 Volt AC/DC. PAR 36 LED Light has Screw Terminal G53 to connect power. Low power low voltage 10-30 Volt ac/dc. Available in white only 6000 K. Great for landscape lighting. CE and RoHS listed. Luminous Efficacy: 80 lm/w. Lumen maintenance: 80-90%. Forward Lumen: 500 Lm. Unit Watts: 5 W. CRI: 75. IP65 Weather Proof. 100% dimmable with a variable DC power supply. Replacement for H12V35. Made of glass. Comparable to a 50 Watt incandescent light bulb. The glass is diffused. 4.5" diameter.

E12 LED 2 Watt AC/DC 12 Volt Dimmable NCNRNW

Product Code: 75461

E12, DC 12 Volt low voltage. Up to 1850 lumen output, Comparable to a 15 watt incandescent. 360 illumination. Lifespan up to 30,000 hours. Made of crystal clear GEL injection. Available in white 6000K and warm white 3000K. Dim-able with a variable voltage supply. Approximate size 1.88" long. 0.59" diameter. NCNRNW this bulb can easily screw into a 120 volt socket and blow up the led bulb.

Midget Screw Round 6 12 24 VDC T 1-3/4 Dim-able 90 Degree E5

Product Code: 24577

Small E5 Midget 1 L.E.D., Available in 6VDC, 12VDC and 24VDC options. Up to 7 Lumen output, long life up to 50,000 hours. Available in Warm White 3000K and White 6000K. Uses very low .1 W power, uses 20ma@6V, 13ma@12v. The viewing angle is 90 degrees. MINIATURE T1 3/4 MIDGET SCREW (E5) BASE BULB. Comparable to a 4 Watt incandescent bulb. CRI>75. The miniature led lamp is called E5 since the base is 5 mm in diameter. This bulb is real small for E5 female screw base socket or lamp holder. The bulb operates at 6 Volt, 12 Volt and 24 Volts. This led bulb works great for back lighting for the ignition switch and various other areas of the dashboard compatible with Rolls Royce cars. This bulb is compatible with #272-1143, 272-1143, #8362, #335, #373, #342, #399, #1768, #1775, 176769L, #7326, #1769 These are tiny led light bulbs. The lamp will turn on around 2.5 Volts and gets brighter up to 6 Volts.

E14 LED Bulb 12 Volt AC-DC 18 SMD NCNRNW

Product Code: 58643

18 SMD 5050 3 Chip E14 Low Voltage 12 Volt A.C or D.C. LED Light Bulb. 3 forward firing and 15 side firing LEDs. Only uses .17 mA at 13.8 Volt D.C. Great for energy saving low voltage LED Light applications. This LED measures from top to bottom 1.98 in and a diameter of .60 in. 25 to 35 Watt incandescent equivalent. Uses 3.2 Watts at 12 Volt D.C. Up to 300 Lumen output.

Rebaydo 2pcs E10 Miniature Screw Concave LED Bulb 12 Volt DC

Product Code: 79564

Rebaydo 2pcs E10 Miniature Screw Concave LED Bulb 12 Volt DC features a single concave LED that provides focused light output with a 60 degree viewing angle. Designed for operation at 12 Volts DC, this durable bulb is shock and vibration proof with instant On/Off performance, low heat generation, and virtually unbreakable construction. Available in super white, red, yellow, green, and blue, it delivers up to 7 lumens of output. Approximate dimensions are 0.90" height x 0.44" maximum overall diameter. The yellow version has a different profile with an approximate maximum overall diameter of 0.45" and an overall height of 1.10". Current draw at 13.8V is 18mA (white), 19mA (yellow), 20mA (green), 19mA (blue), and 23mA (red).

Rebaydo 2pcs LED Flashlight Bulb Pr2 P13.5S 3W 5-24V DC

Product Code: 32324

Rebaydo 2pcs LED Flashlight Bulb PR2 P13.5S 3W 5-24V designed to replace incandescent flashlight bulbs with energy-efficient LED technology. Produces up to approx. 200 lumen output in white 6500K and is comparable to approx. 27 watt incandescent bulbs while extending battery life up to approx. 9 times. Operates from approx. 5V to 24V DC, begins illuminating at approx. 4.36V, draws approx. 0.453A and approx. 0.090A at 24V. Features a long service life of up to approx. 30,000 hours and durable construction for flashlight, lantern, and portable lighting applications. Approx. 0.94in length and approx. 0.531in ring diameter.

Page 18

General Bulb

Rebaydo 2pcs LED Flashlight Bulb P13.5S 3W 6-24V Non Polarized

Product Code: 34432

Rebaydo 2pcs LED Flashlight Bulb P13.5S 3W 6-24V. Up to 200 Lumens. Long life up to 30,000 hours. Comparable to a 27 Watt incandescent bulb. Available in White 6000K and Warm White 3000K. Works AC/DC Replace your broken incandescent bulb with a virtually unbreakable led bulb. The ring is 13.5mm. The length is 14mm. Extends battery life up to 9 times what a incandescent bulb would use. Starts to illuminate at 5.11 volts. Uses about 0.291 amps at 6 volts. Uses about 0.077 amps at 24 volts. CE and Rohs.

LED Puck 10W Module 12 VDC Dimmable

Product Code: 85695

LED Puck 10W great for displays, art exhibits, spot light illumination. 12 Volt DC. Low heat, long life. Available in white 6000K only. Light is always on when power applied. Up to 850 lumen output. Dimmable with a variable voltage supply. 120 Degree viewing angle. The wire length is approximately 7.5" with the connector. The wire itself is 6.5" long. Comparable to a 80 Watt incandescent bulb. Approximately 20 AWG wire that is inside a sheathing. The hole to hole spacing is approximately 1.9". The mounting hole diameter is approximately 0.131". CE and Rohs.

Standard 12 Volt Ultra Bright 7 SMD LED AC DC E27 NCNRNW

Product Code: 45795

Lumen output 510 white and 480 warm white . 50-60W Incandescent equivalent. 8 Watt power consumption. Please note Green color is 4 watts and measures 4.15" long and 1.98" wide. Available in white 6000 Kelvin and warm white 3000 Kelvin. Long life of 30,000 hours. E27 screw in base. Operating voltage 12V AC or 12V DC. Approximate size is 5.46in x 2.34in. Great for Solar Power systems. Super Bright LED Light. Glass Lens. Aluminum, Zinc metal alloy heat sink. IP56. Built in AC to DC electronic converter. Super SMD Bright LED Light 12 VDC. One per package. Please see product 74855 for white and warm white 12 Volt 5 watt product.

Rebaydo 2pcs LED Flashlight Bulb Pr2 P13.5S 3W 3-6V

Product Code: 25335

Rebaydo™ 2pcs LED Flashlight Bulb Pr2 P13.5S 3W 3-6V. 3 Watt led bulb comparable to a 27 Watt incandescent bulb. Available in White 6500K. Long life up to 30,000 hours. The ring is 13.5mm. The length is 14mm. Starts to illuminate at 2.49 volts. Approximately 3.00 volts the current consumption is 0.341 amps. Up to 200 Lumen output. Approximately 6.00 volts the current consumption is 0.218 amps.

E12 Low Profile 12 LED Low Voltage 12V AC/DC LED Lamp NCNRNW

Product Code: 34523

E12 Low Profile 12V AC/DC Low Voltage LED Lamp. 43 Lumen output. 12 Volts AC or DC. Available in white. E12 Base very nice low profile LED Light for small space saving LED lighting. Approximate size is 1.57in (height) x 1.51in (width). Weight: 8.5G. CE and RoHS listed. Luminous Efficacy: 80LM/W. Lumen maintenance: 80-90%. Beam angle: 270 Degrees. Forward Lumen: 27Lm. Side Lumen: 16 Lm. LED Watts: 0.06 W. Unit Watts: 0.5 W. CRI: 70.

E10 male 9 LED Low Profile 12 Volt AC or DC NCNRNW

Product Code: 67234

E10 Screw Base 9 LED Low Profile 12V AC/DC. 9 LEDs, low profile, works either AC or DC 12 Volt system. LEDs shoot light forward and to the sides. Available in white and warm white. E10 Screw Base. Approximate size is 1.50in x 1.36in (height x diameter). Weight: 8G. CE and RoHS listed. Luminous Efficacy: 80LM/W. Lumen maintenance: 80-90%. Beam angle: 270 Degrees. Forward Lumen: 24Lm. Side Lumen: 12 Lm. LED Watts: 0.06 W. Unit Watts: 0.4 W. CRI: 70.

Page 19

Harnesses/Connectors

Waterproof Crystal Harness 2 Conductor

Product Code: 68765

Harness, 2 Conductor, 2 Pin, Waterproof IP68, Crystal Clear. Use this harness for applications that need water resistant to waterproof harness. Comes with both male and female end with oring and plastic cap. Each wire on both the male and female ends are about 6" long.

Connector 12 mm 5 Conductor 4 Way Solder Less PCB

Product Code: 68799

Use this flexible solder less PCB to hook up muliple 12mm 5 conductor strips together. 5 Conductor is for RGBW and ground, low voltage, CE and Rohs listed. Just open connector, insert PCB and close the conector, make to align the little pins to the connector.

GU10 Male to 18AWG 15cm wires Converter

Product Code: 78485

Use this GU10 male socket with wires to connect a GU10 female socket to a fixture or another circuit that can be crimped wired using the #18awg by 15cm long wires. UL, CE and Rohs listed. Save time and money by using a converter.

GU24 to Wire 15cm Harness

Product Code: 79848

GU24 to Wire. Use this GU24 male with 15cm wire to adapt a female GU24 socket for alot of power options. UL, CE and Rohs listed. Made of plastic, the wire is #18 AWG and 15cm length. Easy way to update a GU24 socket into what you need it to do a new fixture, extend the socket, provide power for other uses. Please always use a certified electrician to make modifications in your GU24 application.

E26/E27 Male to E12 Female Converter Adapter

Product Code: 87794

Rebaydo 2 pcs E26/E27 Male to E12 Female Socket Adapter are designed to convert standard E26/E27 sockets to accept E12 candelabra base bulbs, allowing use of specialized bulbs without replacing the fixture and saving time and cost. Made of durable PBT material for fire resistance and high temperature applications, this adapter provides a reliable connection. This device is only a connector/adapter and does not regulate, convert, or produce electrical power. No electronics inside. Dimensions are approx. 1.09 inches diameter × approx. 1.3 inches height, with approx. 0.5 inches inner diameter on the E12 side. Rated for 125V and approx. 75 watts. CE, RoHS, and UL listed.

Rebaydo 4pcs Connector 4 Conductor Black Flexible LED Light

Product Code: 42623

This Rebaydo 4-Conductor Black Flexible LED Light Connector is designed to link compatible 4-conductor flexible LED light strips end to end. Each package includes four connectors, allowing quick and secure connections without cutting, soldering, or modifying the LED lights. One connector will connect two cables. The connector features a black flexible body with a four-conductor pass-through design and contains no electronic components. It provides a direct electrical connection only and maintains continuity across all four conductors for reliable operation. Installation is simple and intended specifically for end-to-end connections between matching flexible LED light strips. Approximate dimensions are 0.39 inches in length and 0.38 inches in width. This connector is ideal for extending LED strip runs, making repairs, or creating custom lighting layouts.

Waterproof Harness For LED Water Proof Flexible Strips

Product Code: 32454

Waterproof Harness For LED Water Proof Flexible Strips. Use this harness to connect power to waterproof flexible strip LED lights product number 47526. This product measures approximately 8.2 inches by 0.65 inches. Wires measure approximately 2.70 inches.

Page 20

Harnesses/Connectors

Y Cable Harness

Product Code: 35673

The Y cable allows one power supply to be hooked up to multiple tube lights 34563 at the same time. Approximate size is 36 inches. Cable Material: Copper. Cable Cover: PVC. Max Current: 1.5A. Dimensions: male plug 5.5mm OD 2.2mm ID, female plug 5.54mm and 2.15 tip.

Rebaydo 2pcs Connector female 5.5mm x 2.5mm

Product Code: 74415

Rebaydo 2pcs Connector Female 5.5mm x 2.5mm with screw-down terminals for connecting bare wire in LED projects and other low-power hookup applications. This connector operates from 3–24V DC at 50/60Hz and features an operating temperature range of -40°C to +70°C, storage temperature range of -40°C to +70°C, operating humidity of 20%–80%, IP5 rating, and a work environment range of -30°C to +70°C. The connector weighs 4.48g and measures approximately 1.47 inches overall length, 0.56 inches wide at the screw terminal side, 0.40 inches wide at the connector side, and 1.25 inches in length excluding the screw terminals.

H11 H8 880 881 female Adapter to Pigtail Wires

Product Code: 74898

This H11 H8 880 881 Male Adapter to #18 awg wires. high efficient, heavy duty and heat resistant. Nylon female plug can withstand up to 1200 Fahrenheit. H11/H8 or 880/890 lamp connector for 12V use only. Up to 55 watts power per harness. Harness is approximately 7.75 inches long. Made with #18 awg stranded wiring to handle the high powered driving lights. Great for fog, driving or headlights. Water proof PVC and nylon plastic adapter and 6.5 inches #18 awg wiring. H11 H8 880 881 male are interchangeable, they all fit the same light bar, or cube light, fog light, headlight. Two insulation displacement connectors are included to connect the wire to the existing automobile harness with minimal damage to the automobile harness. Approximately 7.75" in overall length, with the wires being 6.5". Overall width of connector end is approximately 1.07", with the plug being 0.66".

Connector male 5.5mm x 2.5mm

Product Code: 12787

Connector, water resistant male 5.5mm by 2.5mm with screw down terminals. Makes it easy to hook up led and other low voltage projects.

Harness, Waterproof, 4 Pins (RGB) male & female set White

Product Code: 21311

Harness, Waterproof, 4 Pins (RGB) male & female set White. Use this waterproof 4 pin harness for RGB led flexible strips. CE and Rohs listed. White color. The wire is about 6" long on the female side of the harness. The wire is about 6" long on the male side of the harness. Comes with a O-ring gasket to seal the harnesses.

Harness 3 Way Splitter 5mm Black 1 Female input 3 male Output

Product Code: 21542

Harness, 3 Way Splitter, 5mm Round Black, 1 Female input, 3 male Output. Use this harness to split the input to three different outputs. The cable is black color and has round 5mm female input and 3 round 5mm male output connections.

Rebaydo 2pcs H11 female to H10 male Socket Converter/Extension

Product Code: 23659

H11 female to H10 male Socket Converter/Extension. This extension will allow you to extend your factory wires down to your new fog lights. Or convert your existing H11 socket to an H10, without the need of splicing or re-wiring. Approx. 9.5" end to end. UL1015 #18 ,can handle up to 55w power. The pin to pin spacing for h11 is approx. 5mm and the pin to pin spacing for h10 is approx. 7.5mm. Female End Compatibility: H11 PGJ19-2 Male Sockets. Male End Compatibility:H10, 9005, 9006, 9012, 9140, 9145, 9150, 9155, HB3, HB4, and 9006XS Female sockets.

Page 21

Harnesses/Connectors

Rebaydo 2pcs T5 T8 Tube Light 2 Conductor female To 2 Conductor female

Product Code: 23624

Rebaydo 2pcs T5 T8 Tube Light Interlink able Connector designed for linking T5 SMT LED tube lights in series, featuring a 2 conductor female to 2 conductor female configuration with equal conductor sizing and durable white housing for secure connections. Measures approximately 0.90in x 0.26in x 0.52in and operates within 110V-240V at 50/60Hz, suitable for indoor environments with operating temperatures from -30 to +170 Celsius, environmental range of -20 to +70 Celsius, humidity tolerance of 30%-65%, and IP5 protection rating, making it ideal for reliable lighting system integration applications. Fits Product Code: 34546 only.

3-Way LED Light Harness Cable 12VDC White

Product Code: 34589

3-Way LED Light Harness Cable. Great for use with multiple lights. This harness allows you to plug 3 different tube lights, modules or other LEDs to the same power source. ~11.81" in total length.

Rebaydo 2pcs Flat LED Rope Light RGB Power Harness NCNRNW

Product Code: 47678

Rebaydo 2 pcs Flat LED Rope Light RGB Power Harness are designed to connect RGB flat LED rope lights to a power supply or RGB controller, providing a professional and organized connection. The harness features a 4-pin flat connector with common anode (+12V DC) and separate inputs for Red, Green, and Blue channels. Dimensions are approx. 9 inches wire length × approx. 1.56 inches connector width × approx. 1.93 inches connector length × approx. 0.60 inches connector height, with approx. 0.2 inches pin spacing. Rated for approx. +12V DC. CE, RoHS Listed.

Connector 8mm Female 2 Conductor Solder Less

Product Code: 67849

Flexible strip connector 8mm single color, no wires. Use this connector that does not have wires using a header female socket. CE and Rohs listed.

Interlinkable 8 mm 2 Conductor To 5 mm Female Power Plug

Product Code: 68494

Connector one end DC female 5 mm round connector and other end 8 mm single color. CE and Rohs listed.

Connector male 5.5mm x 2.1mm Water Resistant

Product Code: 74578

Male 5.5mm Connector Low Voltage DC Water Resistance. Connect wires to the other side using screw terminals, tightened by standard screw driver. Fits many LEDLight.com products. female plug 5.5mm and 2.15 tip.

Interlinkable 8 mm 2 Conductor Solder Less To Wires

Product Code: 84984

Flexible strip connector, 8 mm, female, with wires, single color. Quick and easy connector to hook up your single color flexible strips that are 8 mm in width.

Page 22

Harnesses/Connectors

Female 5.5mm x 2.1mm DC Water Resistant Connector

Product Code: 94362

Female 5.5mm DC Water Resistant Connector. Wire connects to screw down terminals. Fits all LEDLight.com products that have the 5.5mm connector male and female. Approximate dimensions: female plug 5.54mm and 2.15 tip.

T5 Tube Light Inter Connect Cable

Product Code: 94568

Use this cable to inter link or inter connect the T5 tube lights together. This connector comes equipped with one end female plug-in and the other end male plug-in for easy installation. It is designed to be flexible and sturdy at both ends. Approximate size from end to end is 9 in. Fits Product Code: 34546 only.

Interlink-able 10mm 2 Conductor To 10mm 2 Conductor

Product Code: 15634

Harness for 10mm wide single color led flexible strips. Easy to connect. Made of PBT and metal materials. CE and Rohs listed. Easy to use connector just snap it the specifically designed strip.

Connector 12 mm female 2 Conductor Solder Less

Product Code: 16532

Connector for flexible led strips 12mm wide single color, no wires. CE and Rohs listed. Using this connector makes it easy to connect power to the flexible strip.

Single Color Female LED Light Harness

Product Code: 46890

Single Color Female LED Light Harness. This harness has a 1x4 female socket so you can hook up some controllers and power supplies without cutting wires. Approximate size of connector plug is .52in x .45in x .15in, with 1ft 11in of loose wire.

Fuse Holder 6mm x 30mm FH42 with Pigtail wires

Product Code: 84573

Fuse Holder with Pigtail wires.12 Gauge or 14 Gauge Wire, Screw Together Fuse Holder, Accepts AGC Glass Fuses 25A fuse included. FH42 fuse holder. Accepts 6mm x 30 mm fuse. Comes with a 25 Amp fuse. Excellent choice to protect your electronics from over current.

Rebaydo 2pcs Connector 12 mm 5 Conductor 3 Way Solder Less PCB

Product Code: 94844

Rebaydo 2pcs Connector 12mm 5 Conductor 3 Way Solder Less PCB for connecting 3 RGB+W flexible LED strips without soldering or special crimp tools. Open your existing connector housing, align the strip, and close the lid for installation. Features 3V-24V operation, 50/60Hz frequency, and IP5 rating. Dimensions include .790" overall length, 1.101" width, and .473" connector ends. Contact area width is .473" with a 1.101" center section length. CE and Rohs listed

Page 23

Harnesses/Connectors

Connector 10mm female 2 Conductor Solder Less

Product Code: 14516

Flexible Strip LED connector, 10mm wide, used for single color strips, has no wires. Made of PBT and metal materials. CE and Rohs listed.

Rebaydo 2pcs LED Light Tube Custom Harness Male

Product Code: 67452

This Rebaydo 2pcs male custom harness is designed to connect LED Tube Lights part number 34563 to the 50 watt power supply part number 44397 or the 150 watt power supply part number 32896. It provides a simple connection between compatible LED lighting products and power supplies for custom lighting setups. The harness features a male DC plug connector with wire leads for easy installation and wiring. The connector size is approx. 5.5 mm outer diameter × approx. 2.2 mm inner diameter. The cable is constructed with copper wire and a PVC cover with a cross section of approx. 0.5189 mm², rated for a maximum current of 2 A, using 20 AWG wire. Each harness is approx. 18 inches in length. Two harnesses are included per package and each unit is tested before shipment. CE and RoHS listed.

Rebaydo 2pcs Power Supply LED Light Custom Harness

Product Code: 94350

This Rebaydo 2pcs power supply LED light custom harness is designed to connect the LED Power Supply 65987 to flexible LED lights such as part number 49587 or other 12?VDC products. The harness provides a reliable and durable connection for custom LED lighting setups. Each harness is approx. 18?inches in length, constructed with copper wire and a PVC cover, with a cross section of 0.5189?mm², rated for up to 2?A. The female plug connector measures 5.54?mm with a 2.15?mm tip. Two harnesses are included per package, and each unit is inspected before shipment. CE and RoHS listed.

Connector L Shape, RGB Color, White, Solderless

Product Code: 26145

L shape connector for RGB flexible strips. Use this quick connector to hook up RGB that would benefit from using this L connector. Made of PBT and metal materials, white in color, CE and Rohs. Fits Flexible Strip 23188.

Harness Waterproof 5 Pin IP66 AWG20 Black 40cm

Product Code: 68774

Harness waterproof IP66 Black, 5 Pin, 20 awg, 40cm long. Works to waterproof connectors that could get wet. CE and Rohs listed. Water resistant, easy to connect. Kit comes with male harness, female harness, connector nut and O-ring.

3 color Interconnect Cable Harness 5 Foot male to male

Product Code: 73573

Use this cable to connect flexible ribbon strips together in areas that you do not need to illuminate. Works great to light from window to window. Can handle all 3 colors red, green, & blue at one time. It has a male header on each end of the harness to plug into a female flexible led lighting product such as product 78453, 94567 & 67342. Works with Common Anode strips only.

Rebaydo 2pcs Harness 1 Color Interconnect Cable male to male

Product Code: 74345

Use this cable to connect flexible ribbon strips together in areas that you do not need to illuminate. Works great to light from window to window. Can handle one color at a time. It has a male header on each end of the harness to plug into a female flexible led lighting product such as product ##58758, 25451, 25456 . Works with Common Anode strips only.

Page 24

Harnesses/Connectors

Interlink-able 12 mm 2 Conductor To Round female 5 mm Connector

Product Code: 12778

Connecter, 12mm, Single Color, Round female 5mm DC power connector. Use this quick connect to hook up power to 12mm flexible strips that accept these quick connectors, made of PBT and metal materials.

Connector, 4 Way, 4 Conductor RGB Color, White

Product Code: 21124

4 way splitter for RGB led flexible strips, so that up to four strips can be connected together. The splitter accepts standard male headers .1 spacing. CE and Rohs listed.

Rebaydo 2pcs LED Light Protector

Product Code: 32412

Protects LED Lights from starters, alternators, amplifiers regulators and other magnetic sources. Helps the LED Lights last longer. Included is 2.5" of wire and 2 IDC "insulation displacement crimp". No special tool needed just a pair of pliers. No wires are cut and the IDC can be easily removed with minimum damage to the wire or harness assembly.

Rebaydo 2pcs AC Power Cord 3 Terminal Female for T5 or T8 Tube White

Product Code: 84348

Rebaydo 2 pcs T5/T8 LED Fixture AC Power Cord 3-Pin Plug (48 inch) are designed to connect integrated T5 and T8 LED fixtures to a standard USA outlet, providing a simple and convenient power solution without complex wiring. The cord features a 3-pin plug with a larger center hole for proper fitment and secure connection, helping streamline installation and ease of use. Dimensions are approx. 48 inches length. Rated for approx. 300 volts AC and approx. 10 amps. CE, RoHS, UL listed. Fits our product codes: 85757, 78947, 74784, 93845 & 56845.

Connector, 3 Way, RGB Color, White

Product Code: 12114

Connector, 3 Watt, RGB Color, White. Use this 3 way splitter to "T" RGB flexible strips together. Accepts standard .1 spacing header, or connector.

Harness, Splitter 2 Way, Black, 5mm 2 male and 1 female 5mm

Product Code: 12477

Harness, Splitter 2 Way, Black, 5mm 2 male and 1 female 5mm. Use this DC power connector to split power to two dc power connectors. The harness is about 8 inches long and black in color.

Harness, 4 Way, RGB Color, White

Product Code: 12748

Harness 4 way splitter for RGB flexible LED strips. If you need to hook up 4 RGB L.E.D. strips this is the best and easiest way to hook them up. The harness is white color.

Page 25

Harnesses/Connectors

Harness, Waterproof, 2 Pins, male & female set, White

Product Code: 21211

Harness, Waterproof, 2 pins, single color, both male and female ends with 6 inches of wire, and O-ring. This waterproof harness and connectors have 2 pins which you can use for single color l.e.d. flexible strips or other items that need waterproof. The harness exterior color is white.

Interlink-able 12 mm 4 Conductor to Wires

Product Code: 21241

Use this connector to hook up 12mm RGB flexible LED Strip to a power supply, to longer wires, interlink to another flexible strip. The L.E.D. flexible strip must be designed for these connectors. No special tools are required to make professional at home wiring connections. Use this connector to hook up 12mm RGB flexible LED Strip to a power supply, to longer wires, interlink to another flexible strip. The L.E.D. flexible strip must be designed for these connectors.

Connector 12 mm female 4 Conductor Solder Less

Product Code: 21371

Use this RGB connector, to inter link 2 RGB LED flexible strips together. This quick connector makes it easy to hook up 4 conductor RGB strips that are designed for this quick connector.

Interlink-able 12 mm 2 Conductor To 12 mm 2 Conductor

Product Code: 21510

Connector, 12mm, Single Color, With Wires for flexible LED strips. Use this harness to interlink two led strips together. CE and Rohs listed. Made of PBT and metal materials. No special tools are required to hook up this solder less connector

Harness, Waterproof, 3 Pins (CCT), male & female set White

Product Code: 23142

Harness, Waterproof, 3 Pins (CCT), male & female set White. This waterproof harness is designed for CCT LED strips. There are 3 pins, so 2 channels or colors can be used. Both the male and female set with O-ring included, white color.

Harness, Single Color, Wire one end

Product Code: 32614

Use this harness for single color LED flexible strips. The wires are red and black about 8 inches long. You can crimp or solder the wires to attach them you your desired connection.

Rebaydo 2pcs Multi Color Female LED Light Harness

Product Code: 47803

This Rebaydo 2pcs multi color female LED light harness is designed to extend flexible LED light harnesses or adapt to RGB controllers for multi-color lighting systems. It provides a convenient connection point for RGB LED lighting setups and custom wiring projects. The harness includes three silver wires for RGB channels and one copper wire for ground. The wires are insulated for durability, and the end opposite the female connector is pre-stripped to allow easier installation and wiring. The connector measures approx. 0.55 in × 0.44 in × 0.16 in and the wire length is approx. 2 ft. Two harnesses are included per package and each unit is inspected before shipment. CE and RoHS listed.

Page 26

Harnesses/Connectors

Connector 10mm 4 Conductor 3 Way Solder Less PCB

Product Code: 64888

PCB, RGB, T Shape. Use this to insert into a connector to make the desired shape that is needed. CE and Rohs listed.

Mini Blade Weather Resistant Fuse Holder with Wires

Product Code: 65475

Use this Mini Blade Fuse Holder and harness to properly fuse a LED circuit, a tail light or any long wires. Approximate size is 1.02in x 1.40in, with 9.5in of wires. The wire gauge is 18awg stranded. Protect your circuit by using this mini blade fuse holder to protect the circuit from over current. Use on your boat, vehicle or other uses that requires over current protection.

AC Power Cord 3 Stranded wires for T5 or T8 Tubes White

Product Code: 71545

Use this AC power cord to connect to integrated LED tube fixtures. One end has the american power plug that fits a normal wall receptacle. The other end is wires to hook up to a led tube by wire nut or screw mounting. The length of the cord is about 48 inches. The cord is white in color. the cord is rated up to 10 amps@300VAC. The cord is UL, CE and Rohs listed.

Harness with 5.5mm Connector

Product Code: 74511

Harness with both male and female 5.5mm x 2.1mm DC power connectors. Make it easy to hook up a switch to your low voltage circuit. 25cm long 22awg wire.

Interlink-able 10mm 2 Conductor To Round female Plug 5mm

Product Code: 74844

Connector, 10mm, female DC power plug 5mm, Single Color, with wires. Use to hook up flexible LED strip to 5mm round power plug. Made of PBT and metal materials. CE and Rohs listed.

Connector Male 5.5mmx2.1mm to Screw Terminals

Product Code: 76577

Connector Male 5.5mm outside, 2.1mm inside to screw terminals. CE and Rohs listed. This is a newer design for the connector

Rebaydo 2pcs R7S Female 254mm Socket with Wires

Product Code: 78442

Rebaydo 2pcs R7S 254mm Female Socket with Wires. R7S 254mm female socket with attached wires, constructed from ceramic and metal-plated materials for durability and long service life. Wires are approximately 15cm long with approx. 0.75mm diameter. Designed as a direct replacement socket to repair fixtures without replacing the entire unit. Dimensions: Overall length approx. 286mm, socket spacing approx. 254mm, wire length approx. 150mm, width approx. 43mm, height approx. 14.8mm. Electrical Rating: up to 250V AC, up to 1000W, approx. 2–4A. Applications: Suitable for R7S linear halogen or LED fixtures, including floodlights and work lights requiring 254mm sockets. Quantity, Quality & Warranty: Two (2) units. Each unit is inspected before shipment.

Page 27

Harnesses/Connectors

Interlink-able 10mm 4 Conductor Solder Less To 4 Conductor

Product Code: 78487

Connector, 10mm, RGB Color, No Wires. Use this quick connector to hook up RGB flexible 10mm LED strip. Made of PBT and metal materials. CE and Rohs listed. No special tools are need to use the solder less or the 4 conductor.

Interlinkable 12 mm 6 Conductor To 12 mm 6 Conductor Pack of 5

Product Code: 87497

Connector, 12 mm, 6 conductors, solder less connector. CE and Rohs listed. Use this solder-less connector to connect two 12 mm 6 conductor products together without solder or crimping. This connector accepts 12 mm 6 conductor PCB to be interconnected. Product comes packaged 5 products.

Rebaydo 2pcs Single Color Flexible LED Light Harness

Product Code: 87964

Rebaydo single color flexible LED light harness is designed for 12 VDC systems and allows easy connection of single color flexible LED strips without splicing or modifying wires. Harness length is approx. Approx. 5 feet with one pin for ground and one pin for the LED signal; the other two pins are unused. Plug-and-play installation requires no soldering or crimping. Ideal for automotive, motorcycle, or home LED projects. Quantity includes Two (2) harnesses.

Connector 10mm 2 Conductor 3 Way Solder Less PCB

Product Code: 87966

Single Color T Shape 10mm PCB for inserting into 10mm connector. CE and Rohs listed. Two conductor, so you can illuminate one color with this solder less connector.

Rebaydo 2pcs Multi Color Flexible LED Light Harness

Product Code: 89763

This Rebaydo 2pcs multi color flexible LED light harness is designed for RGB flexible LED strips and other LED lighting products. The 4-wire harness includes three silver wires for the RGB channels and one copper wire used as ground. It is compatible with both common anode and common cathode RGB configurations and is designed for 12 V DC LED lighting systems. One end features a male connector that plugs into compatible LED lighting products, while the opposite end is stripped to allow easy wiring and installation in custom lighting setups. The harness uses 24 AWG wire with a four-wire RGB configuration consisting of ground or positive, red, green, and blue conductors. Two harnesses are included per package and each unit is inspected before shipment. CE and RoHS listed.

Interlink-able 10mm 4 Conductor To 10mm 4 Conductor

Product Code: 94877

Use this 10mm quick connector to interlink to RGB flexible LED strips. CE and Rohs listed. Made of PBT and metal materials. Easy to connect two 10mm flexible RGB strips.

Interlink-able 12 mm 4 Conductor To 12 mm 4 Conductor

Product Code: 12454

Interlink able connector for RGB flexible strips. Use this harness to connect to RGB LED flexible strips together. Using this quick connect harness you can make the RGB look professionally done. The connector has a notch to allow 60 leds per meter strips to fit without any issues.

Page 28

Harnesses/Connectors

Harness, 4 Pin, RGB Color, Wires, White

Product Code: 21312

Use this harness to hook up RGB flexible strips that use the pins to hook them up. White color, 4 wires. Easy and clean way to hook up RGB flexible strips that use the pin method to hook up.

Wire, RGB Color, 4 Wires, 20 Awg, Stranded, 6 Inches

Product Code: 21421

Wires, RGB Color, 4 Wires, 20 Awg, Stranded, 6 Inches. These wires are all together as one wire set. Can be used with common anode or common cathode configurations. Can be soldered or crimped as desired.

Interlink-able 10mm 4 Conductor Solder Less To Wires

Product Code: 21624

Use this harness, connector to hook up RGB flexible strips. The harness has 4 wires to hook up 3 different colors. Made of PBT and metal materials. Easy to quick connect this harness to RGB flexible LED strips. No special tools are required to make professional connections the first time.

Connector, Round DC 5mm, Black, Male & Female Set

Product Code: 14512

This round 5mm male and matched female connector with wires, it is black color Wires about 6 inches long. Each wire has a small red and black wire to provide contact through the round 5mm connectors.

Harness, 4 Way Splitter, 5mm female Input, 4 5mm male, Black

Product Code: 21422

Harness, 4 Way Splitter, 5mm female Input, 4 5mm male Output, Black. Use the harness connector to split 5mm female round input to 4 male round 5mm output. The cable is black.

Interlink-able 12 mm 2 Conductor To Wires

Product Code: 21784

Connector 12mm Single Color 2 Conductor with wires. Use this harness to quick connect for flexible led strips. Made of PBT and metal materials. CE and Rohs listed. No special tools are required to hook up this 12mm 2 conductor with wires

Connector 4 Conductor White

Product Code: 24615

Use this connector to interlink to color and RGB L.E.D. flexible strips together, harness are white in color, made of PBT, metal materials. CE and Rohs listed. Standard .1 spacing between pins.

Page 29

Harnesses/Connectors

Wire, Red & Black, 20 AWG, Stranded, 6 Inches

Product Code: 98477

Red & Black wires about 6 inches long. The wires are attached together but can be separated. The wires can be soldered, crimped to the desired connection.

Rebaydo 5-Way LED Light Harness Cable 12VDC White

Product Code: 33287

5-Way LED Light Harness Cable. Great for use with multiple lights. This harness allows you to plug 5 different tube lights, modules or other LEDs to the same power source. ~11.81" in total length. Approx. male connector width: 0.39 inches Approx. female connector width: 0.39 inches

Harness Dual Channel Wire Kit 12 VDC

Product Code: 67283

Use this kit (1) to hook up (2) two LED lights. Saves time and money. Complete Plug and go wiring kit harness for LED Work Lights and Off Road Light Bars. Wiring harness includes an On/Off switch, a 30 Amp. fuse, and 40 Amp relay with solder less spade connections. Entire harness measure 79 inches in length. Harness can handle a maximum load of 16 Amps. 12VDC.

Interlink-able 8mm 2 Conductor To 8mm 2 Conductor

Product Code: 87488

Use this connector to interlink to flexible 8mm strips together. Wires about 3.5" long. Made of pbt plastic and metal materials. CE and Rohs listed. No special tools are required to connect this solder less technology, make connections like a pro using these solder less connectors.

Rebaydo 2pcs Linking Connector for Tube lights Same Hole Size

Product Code: 42624

Rebaydo 2pcs T5 T8 Tube Light Linking Connector is a compact connector designed for linking T5 and T8 tube lights with minimal spacing between fixtures, featuring six total contacts with three on each side and uniform hole diameter for consistent connection. Constructed with a durable PVC body and plated metal contacts for long-lasting performance, it ensures reliable conductivity and secure installation. The connector measures approximately 0.44 x 0.69 x 0.56 inches and is finished in white for clean integration into lighting setups. It is suitable for LED tube lighting systems and continuous lighting applications where tight spacing is required. Certifications: CE, RoHS

Flexible Ribbon RGB Harness 5 Foot male to male Common Cathode

Product Code: 85469

Great to interlink flexible ribbon strips together. Works great to light from window to window, from display to display. Can handle all 3 colors red, green, & blue at one time. It has a male header on each end of the harness to plug into a female flexible led lighting product such as product 46574, 93456 & 34545. Works with both common cathod and common annode RGB strips.

Connector Interlinkable 3 Conductor Female Ground Hole Larger

Product Code: 65856

T5 or T8 Tube Light Interlinkable 3 Conductor White. The connector is white. Female 3 conductor to 3 female conductor. Ground conductor is slightly larger than other two conductors diameter. Only for use with Product Code: 93845 & 56845.

Page 30

Harnesses/Connectors

Connector 10mm 5 Conductor 2 Way Solder Less PCB

Product Code: 84593

Use this 10mm 2 Way 5 Conductor RGBW to connect 2 solder less RGBW flexible strips together. CE and Rohs listed. Very easy to open connector, insert align strip and close connector.

Connector 10mm 5 Conductor 3 Way Solder Less PCB

Product Code: 87674

Use this 10mm 3 Way 5 Conductor RGB+W solder less connector to hook up 3 solder less RGB+W solder flexible strips. CE and Rohs listed. Open connector, insert strip close lid very easy to use, instead of a solder iron or crimp tool.

Rebaydo 2pcs H11 female to Wires Harness Converter

Product Code: 89689

Rebaydo H11 female to wire harness socket converter and extension harness allows conversion of existing H11 factory sockets to compatible wire harness connections without cutting, splicing, or rewiring. Can also extend factory wiring to reach relocated or aftermarket headlights or driving lights. Harness length is approx. 9.5 inches end to end with UL1015 #18 gauge wire rated for up to 55 watts. Plug-and-play installation requires no splicing. Ideal for vehicles using H11 connectors for heavy-duty high current driving, fog, or headlight applications. Quantity includes two extension harnesses.

Rebaydo 2pcs G53 female Ceramic Socket with Pigtail Wires

Product Code: 68448

Rebaydo 2pcs G53 Female Ceramic Socket with Pigtail Wires are designed for easy replacement of worn or damaged G53 sockets without replacing the entire fixture. Constructed from heat-resistant white ceramic with pre-attached 18 AWG pigtail wires for secure electrical connection. Dimensions are approx. 2.75 inches length × approx. 1.22 inches width × approx. 0.96 inches height, with wire lengths approx. 3.5–4.2 inches and center hole approx. 0.22 inches diameter. Rated for 250V, 50/60Hz. Ideal for G53 base lamps and fixtures requiring a durable, reliable socket replacement. Ensure power is disconnected before installation. CE and RoHS listed.

Rebaydo 2pcs E26/E27 Female Socket Towel Style

Product Code: 78644

Rebaydo 2 pcs E26/E27 Female Socket Surface Mounts are designed for installing light bulbs directly onto flat surfaces, allowing creation or replacement of fixtures without a full housing and helping save time and cost. Constructed from durable PBT and plated metal materials for reliable electrical contact and long-lasting performance. Dimensions are approx. 2.37 inches hole-to-hole mounting distance × approx. 2.09 inches overall height × approx. 0.66 inches distance between screw terminals × approx. 5.3 inches mount base diameter × approx. 1.57 inches E26 end diameter × approx. 1.01 inches inside diameter. Rated for approx. 6A @ approx. 250V. CE, RoHS listed.

R7S female 118mm socket with wires

Product Code: 86576

Rebaydo 2 pcs R7S 118mm Female Socket with Wires are designed to repair or replace damaged fixtures or upgrade existing fixtures to support R7S 118mm LED or halogen bulbs, providing a reliable solution without replacing the entire fixture. Constructed from durable ceramic and metal materials for high heat applications, each socket includes pre-attached wires for easy installation. Dimensions are approx. 136 mm overall length × approx. 115 mm mounting hole distance × approx. 87 mm inner spacing × approx. 43.7 mm height × approx. 15 mm base height, with approx. 7.5 inches wire length on each side. Rated for up to approx. 250VAC, up to approx. 1000 watts, and approx. 2–4 amps. CE and RoHS listed.

Rebaydo 2pcs R7S female 189mm socket with wires

Product Code: 86866

Rebaydo 2pcs R7S 189mm female socket with pigtail wires made of ceramic and metal plated materials for durability and high heat resistance, designed to handle high-temperature light sources such as R7S bulbs and provide a cost-effective solution by replacing the socket instead of the entire fixture, with approximate dimensions of 210 mm overall length, 185 mm socket spacing, 160 mm inner spacing, 43.3 mm height, and 14.8 mm width, rated up to 250VAC, 1,000 watts, and 2–4 amps at 50/60Hz, and functioning only as a connector without regulating, converting, or producing electrical power.

Page 31

Harnesses/Connectors

Connector 10mm 4 Conductor 4 Way Solder Less PCB

Product Code: 87549

Use this 10mm four way solder less connector to connector 4 separate flexible 4 conductor RGB and ground together. CE and Rohs certified. Low voltage flexible lighting, solder less, no soldering iron needed or no solder. Just Open connector, align flexible strip and close connector.

Cable T5 Tube Light Interlinkable 3 Conductor Black 43 Inches

Product Code: 45764

T5 Tube Light Interlinkable Cable. Use this connector to interlink T5 LED Bulbs. Best way to interconnect two T5 LED lights together. Fits product T5 Tube light 56845 & 93845 only. This cable is 43 inches from end to end. 43" long, CE and Rohs.

Connector 12 mm 4 Conductor 3 Way Solder Less PCB

Product Code: 59687

Use this PCB connector to interconnect up to 3 12mm 4 conductor. You can connect up to 3 12mm. CE and Rohs listed. The PCB is 12mm wide and only fits 12mm wide solder less sockets. No special tools are needed to make a realiable one time connector. Be a pro at installing your own flexible LED lighting products.

Wire Connector 3 Hole 3 Pack

Product Code: 65859

3 Hole wire connector. Use this wire connector to connect 3 wires by inserting the pre stripped wire into the connector. CE and Rohs listed.

H11 male to H16 female Waterproof Harness Converter

Product Code: 67846

H11 male to H16 female water proof harness. Use to convert your headlights or driving lights from H11 to H16 to use better headlights. CE and Rohs listed. Made with heavy duty wire for high power driving light applications. UL1015 #18 ,can handle up to 55w power.

Rebaydo 2pcs H11 female to P13W male Waterproof Harness Converter

Product Code: 67886

Rebaydo 2 pcs H11 female to P13W male waterproof harnesses are designed to convert H11 connectors to P13W connections for automotive lighting applications. Made with heavy duty large diameter UL1015 #18 wire for reliable performance in higher power setups such as headlights, supporting up to approx. 55 watts. Provides a secure and durable waterproof connection for headlights, fog lights, or other compatible lighting systems. Overall length is approx. 9.5 inches. Plug-and-play design allows quick installation between existing H11 and P13W connectors without cutting or splicing. CE, RoHS listed. Female End Compatibility: H11, PGJ19-2 Male Sockets. Male End Compatibile with: P13W, PSX26W, P13, 12277, 40-343, HB8, PG18.5d-1 (this is the actual base/socket type)

Wire Connector 4 Hole 2 Pack

Product Code: 68458

4 hole wire connector. This connector allows 4 wires to be connected together. To inset a wire pre strip the wire then insert and pull back to make sure the wire is connected. CE and Rohs listed.

Page 32

Harnesses/Connectors

Connector 12 mm 4 Conductor 4 Way Solder Less PCB

Product Code: 68475

Use this 12mm connector to connect four 4 conductor circuits together. CE and ROHS listed. Since this is a 4 way you could hook up a RGB controller to one end and hook up to 3 RGB 4 conductor products can be any 3 colors. No special tools needed.

Rebaydo 4pcs Connector T-type 1 to 1 Wire Solder Less Crimp

Product Code: 69847

Rebaydo 4pcs T Type 1 to 1 Wire Solderless Crimp Connector designed to accept up to 3 wires in a T formation for fast and dependable electrical connections without soldering. Uses pliers for secure crimp installation and features a compact approx. 0.98in x 0.50in x 0.26in size for tight spaces. Operates at 0-36V with 300V rated voltage, 9A rated current, and 50/60Hz frequency. Supports approx. AWG 19-22 wire sizes with approx. 0.06in - 0.08in wire diameter including insulation. Built with wear-resistant anti-oxidant polycarbonate shell with UL94V-0 flame retardant rating and high-purity solid copper conductors with anti-oxidation plating treatment. Suitable for various electrical applications with operating temperatures approx. -22°F to +338°F and environmental temperatures approx. -4°F to +158°F with 30%-65% humidity. CE certified for reliable and durable wire connections.

H11 male to H1 female Waterproof Harness

Product Code: 69867

H11 male waterproof connector to H1 female waterproof connector. Made of heavy duty wire for high power uses such as headlights and driving lights. Harness about 9 1/2 Inches long. UL 1015 #18 awg cable. Handles up to 55 watt of power.

Connector 10mm 5 Conductor 4 Way Solder Less PCB

Product Code: 69898

Use this 4 way solder less printed circuit board PCB to connector four up to 4 color flexible strips, 5 conductor. Very easy no soldering, just open connector, insert flexible circuit board and press closs the connector.

GU10 male to GU10 female Extension 15cm 18awg wire

Product Code: 74746

GU10 male to GU10 female extension harness. About 15cm in length using #18awg wire. UL, CE and Rohs listed. Use these extension in tight locations to give more room to insert the GU10 device. UL listed for high quality reliable harness. Max Wattage 1000W. Max Voltage 277 VAC. Max current @ 277 VAC is 3.61 Amps.

Connector 12 mm 4 Conductor 2 Way Solder Less PCB

Product Code: 74785

Use this 12mm wide, 4 conductor for 3 different colors. 2 Way meaning you can hook up two 12mm 4 conductor RGB, Red, Green and Blue or your own 3 colors together. Solderless, no soldering iron or special tools needed to use this 12mm connector.

9006 male to H11 female Waterproof Harness Converter

Product Code: 76584

9006 male water proof to h11 female waterproof harness. CE and Rohs listed. Made of heavy duty wire for high current applications. Great to change your headlight or adapt a different headlight to your automobile. About 9.5 inches long. UL1015 #18 ,can handle up to 55w power.

Page 33

Harnesses/Connectors

E26-E27 male to E17 female Converter

Product Code: 76965

E26-E27 male to E17 female adapter. UL, CE and Rohs listed. Made of quality black PBT and metal materials. Use this adapter to convert from E26-E27 to E17 to save time and money versus replacing the fixture or expensive hard to find bulb.

Interlink-able 12 mm 6 Conductor Solder Less to wires

Product Code: 78423

Connector, 6 conductor solder less with wires. CE and Rohs listed. Use this connector to connect a 6 conductor PCB to a 6 conductor wires so you can connect other devices easily and reliably. Make professional, fast and easy connections using this solder less connectors.

Connector 10mm 4 Way 2 Conductor Solder Less PCB

Product Code: 78978

Use this 2 conductor, 10mm, four way solder less PCB. This makes it easy to hook up up to four flexible strips that are 10mm wide. Very easy open connector, align flexible, close connector, CE and Rohs listed.

Rebaydo 4pcs Wire Connector Solderless 1 to 1 Wire 18awg to 22awg

Product Code: 79456

Connect 1 wire hole. Use this to connect two wires together without using solder or a crimp tool. Comes 4 in a package. The shell is made of imported polycarbonate material, abrasion resistance and oxidation resistance, UL 94V-0. The contact conductor is made of high-precision pure copper. The surface treatment of contact conductor is made of pickling, plating, environmental protection and oxidation resistance treatment. The rated voltage is 0-36V. The rated current is 9A. The working ambient temperature is 0-40 ?. The temperature resistance is - 20-120 ° C. The flame retardant grade is conforming to UL-94-V0. The minimum cross section is 0.35 mm ² 22awg. The maximum cross section is 0.75 mm ² 18awg. CE and Rohs listed.

Rebaydo 2pcs GX53 Holder Socket with wires

Product Code: 79474

Rebaydo 2 pcs GX53 Holder Socket with Wires for Surface Mounting are designed for surface mounting GX53 lamps, allowing use without replacing existing fixtures and saving time and cost. Constructed from white plastic, each holder includes pre-attached 18 gauge wires and screw holes for secure mounting to flat surfaces. Dimensions are approx. 0.375 inches thickness × approx. 3 inches diameter, with approx. 4 inches cable length, approx. 2.38 inches hole-to-hole spacing across, and approx. 0.6 inches hole-to-hole spacing adjacent. Rated for 110V–240V, max wattage approx. 2200W, frequency approx. 50/60Hz. CE, RoHS listed.

Connector 2 to 2 Wire Pack of 3

Product Code: 79484

Connector two wire to two wire solder less connector. CE and Rohs listed. Please use this solder less connector to connect up to 4 wires together without solder. Save time and money buy using these solder less connectors than using a solder iron and solder. This solder less crimp is very easy to use, just use a pair of players and crimp. Comes 3 to a pack.

Connector 8mm 2 Conductor 3 Way Solder Less PCB

Product Code: 79684

Use this 8mm 3 Way 2 Conductor solder less pcb to hook up 3 solder less flexible strip lights. Very easy open connector, align strip and close connector. CE and Rohs listed.

Page 34

Harnesses/Connectors

Rebaydo 2pcs Interlink-able 12 mm 5 Conductor Solder Less to Wires

Product Code: 83455

Rebaydo 2 pcs 12mm 5-Conductor Solderless to Wire LED Harness Connector are designed to connect a 12mm 5-conductor LED strip to open wire leads for custom wiring projects, allowing easy integration with power supplies, controllers, or other circuits. The solderless design requires no soldering or special tools—simply open the connector, insert the LED strip, and close to secure. Wiring is approx. 6.27 inches long for flexible installation. Dimensions are approx. 12 mm width × approx. 6.27 inches wire length. Electrical rating not specified. CE and RoHS listed.

Connector 8mm 2 Conductor 2 Way Solder Less PCB

Product Code: 84474

Use this 8mm two way two conductor solder less PCB to connect two 8mm solder less flexible strips together. CE and Rohs listed. Very easy open lid, align strip and close lid. No solder irons needed.

Rebaydo 2pcs H10 female to H11 male Waterproof Harness Converter

Product Code: 86743

Rebaydo 2 pcs 9006 female to H11 male waterproof harnesses are designed to convert 9006 connectors to H11 connections for automotive lighting applications. Made with heavy duty UL1015 #18 wire for reliable performance in higher current setups, supporting up to approx. 55 watts. Provides a secure and durable waterproof connection for headlights, fog lights, or other compatible lighting systems. Overall length is approx. 9.5 inches. Plug-and-play design allows quick installation between existing 9006 and H11 connectors without cutting or splicing. CE, RoHS listed. The pin to pin spacing for h11 is approx. 5mm and the pin to pin spacing for h10 is approx. 7.5mm. Male End Compatibility: H11 PGJ19-2 Male Sockets. Female End Compatibility: H10, 9005, 9006, 9012, 9140, 9145, 9150, 9155, HB3, HB4, and 9006XS Female sockets.

1/2" Round Rope 90 Degree Fitting

Product Code: 86756

.1/2 Inch Round LED Rope Light 90 Degree Elbow. Use this ninety degree elbow to make right angle professional looking LED Rope Lighting. Save energy and time by using these pre manufactured connectors. This is an NCNRNW item. Perfect to use with our LED rope light (Product Number 89902).

Connector 10mm 2 Conductor 4 Way Solder Less PCB

Product Code: 87465

Use this 10mm 2 conductor to connect up to 4 different branches. So one branch can be the input power supply and up to 3 branches can be used to provide power to up to the 3 branches. No special plyers, crimpers, soldering gun needed, this product is solder less so you do not need special tools to use and installation.

Connector 12 mm female 6 Conductor Solder less

Product Code: 87565

Use this 12mm female 6 conductor solder less connector to connect a 12mm PCB 6 conductor to make quick and reliable connections. No special crimp tools required.

Harness 4 Way One Female to Four Male Connectors 5mm

Product Code: 87676

4 Way splitter Harness, 1 female and 4 male connectors 5mm, the harness is black in color, each leg about 10 inches long. CE and Rohs listed

Page 35

Harnesses/Connectors

Connector 4 Conductor 2 Way Injected

Product Code: 87677

4 conductor can be used for RGB Red Green and Blue products or choose your own 3 colors, Injected "L" Shape, Wide, white color, 4 conductors, .1 spacing for square pins, rotated 90 degrees output. CE and Rohs listed. no special tools needed.

Connector 10mm 2 Conductor 2 Way Solder Less PCB

Product Code: 87699

Use this 10mm 2 way 2 conductor sodler less pcb to hook up two solder less flexible strips. CE and Rohs listed. OPen crimp, align strip, close lid. No solder irons needed.

Connector 10mm 4 Conductor 2 Way Solder Less PCB

Product Code: 87835

Use this 10mm 2 Way 4 Conductor Solder LEss PCB to hook up two RGB solder less flexible strips. CE and Rohs. Open lid, insert strip and close lid.

Rebaydo 2pcs E26/E27 Male Socket with Wires

Product Code: 87988

Rebaydo 2pcs E26 E27 Male Socket Converter to Wires designed to save time and money by allowing fixture or LED bulb conversions without replacing existing hardware. Features E26/E27 male Edison screw base with approx. 8in wire leads for convenient installation and wiring applications. UL, RoHS, and CE listed for dependable lighting and electrical projects.

Wire-nut wire connectors

Product Code: 89458

UL, CE, SA. 1 per package. Wire-nut wire connectors. Great to make professional wire splice or wire connections. Can use it at any normal household voltage from zero up to 600 Volts max for building wire. Up to 1000 VAC for signs and fixtures. Yellow color. Shut power off to the circuit before using this product. For use with stranded and/or solid Cu/Cu wire combinations. Can connect min 2 #18 to max 4 #14 with 1 #18. Max operating temperature 105C or 221F. For use in dry locations only.

Connector 12 mm 2 Conductor 2 Way Solder Less PCB

Product Code: 89476

Use this 12mm 2 conductor 2 way to hook up two 12mm using solder less no tools required. This is a 2 way connector to connnect up to two 12mm single conductor products together, such as a power supply being hook up to a 12mm solder less flexible led light

Connector 12 mm 2 Conductor 4 Way Solder Less PCB

Product Code: 89764

12mm 2 conductor 4 way PCB. Use this 2 conductor to connect 4 2 conductor circuits. Such as hook up power supply to one way and connect up to 3 led lights to the three other circuits to use up the 4 way connections. CE and ROHS listed. No special tools needed, solder less connection for a professional installation of led lighting products.

Page 36

Harnesses/Connectors

Interlink-able 10mm 5 Conductor To 10mm 5 Conductor

Product Code: 90987

Use this 10mm 5 conductor solder less interlinkable harness to inter connector two RGB+W flexible strips. CE and Rohs listed. Very easy to open lid, insert flexible strip, close lid. NO special tools needed. You can use any 4 colors it does not have have to be red, green, blue and white. CE and Rohs listed. You do not need any special tools to install this interlink-able product together.

Connector 10mm female 4 Conductor Solder Less

Product Code: 94769

Use this solderless 10mm female connector to connect a 4 counductor/4 circuit connection between this connector and a 10mm 4 conductor PCB. No special crimp tools are required,you can make reliable and worry free electrical connections using this solder less technology.

Rebaydo 3pcs Connector T-type 2 to 2 Wire Solder Less Crimp

Product Code: 95677

Rebaydo 3 pcs T-Type 2-to-2 Wire Solderless Crimp Connectors are designed to join two wires together quickly and securely without soldering, allowing easy and reliable connections using standard pliers and simplifying wiring compared to traditional methods. Capable of crimping multiple wires together up to approx. 6 wires depending on configuration. This device is only a connector/adapter and does not regulate, convert, or produce electrical power. No electronics inside. Dimensions are approx. 28.60 mm × approx. 16.63 mm × approx. 6.71 mm. Rated for up to approx. 300V, frequency approx. 50/60Hz.

Connector 12 mm 5 Conductor 2 Way Solder Less PCB

Product Code: 96877

Use this 12mm 2 way 5 conductor RGB+W solder less PCB to hook up two RGB+W flexible strips. CE and Rohs listed. Just open connector, insert flexible strip and close connector. Very easy no soldering tools needed.

Rebaydo 2pcs Interlink-able 12 mm 5 Conductor To 12 mm 5 Conductor

Product Code: 97664

Rebaydo 2 pcs 12mm 5-Conductor Solderless Interlinkable Harness Connector are designed to connect one 12mm 5-conductor LED strip to another of the same width, allowing easy extension or linking of LED strip lighting systems. The solderless design requires no soldering or special tools—simply open the connector, insert the LED strip, and close to secure. Wiring is approx. 6.5 inches long. Dimensions are approx. 12 mm width × approx. 6.5 inches wire length. Electrical rating not specified. CE, RoHS listed.

Rebaydo 2pcs Interlink-able 10mm 5 Conductor Solder Less To Wires

Product Code: 97822

Rebaydo 2 pcs 10 mm 5-conductor solderless LED harness connectors are designed to connect individual color channels of multi-color LED strips to a power supply or color controller. Features an open lid design for quick and easy installation—simply insert the strip and close the lid with no special tools or soldering required. Provides a secure and reliable connection for multi-color LED strip applications. Rated for approx. 3–24 volts. Approximate dimensions are approx. 10 mm width and approx. 6.13 inch length. Suitable for connecting multi-color LED strip lighting systems to controllers or power supplies. CE, RoHS listed.

Connector 8mm 2 Conductor 4 Way Solder Less PCB

Product Code: 97849

Use this 8mm 4-way flexible solder less connector, to connector up to 4 8mm flexible strips 2 conductor. CE and Rohs listed. Easy to open connector, align strip and close connector. For low voltage solder less applications.

Page 37

Harnesses/Connectors

Connector 12 mm 2 Conductor 3 Way Solder Less PCB

Product Code: 98744

Use this 12mm 2 conductor connector to connect 3 different 12mm 2 conductor circuits. Such as a power supply hooked up to one circuit and two 12mm flexible led lighting hooked up to the other two ways. CE and ROHS listed. This connector requires no special tools to operate so you can make perfect solder less connections for your L.E.D. lighting products.

Wire Connector Solderless 2 Hole 12 awg to 18 awg 5 Pack

Product Code: 98756

2 Hole wire connector. Use this wire connector for easy connection of two wires. Just pre strip each wire and insert and pull back to make sure it is connected, very simple solderless connection. The shell is made of flame resistance Insulated material Nylon PA66. The contact conductor is made of high-precision pure copper. The rated Voltage is up to 400V. The rated Current is up to 24A. The minimum cross section for wire conductor is 0.75 mm ² / 18AWG. The Maximum cross section for wire conductor is 2.5 mm ² / 12AWG. The product size: 20*13*9mm. CE and Rohs listed.

Interlink-able 10mm 2 Conductor Solder Less To Wires

Product Code: 26154

Connector for 10mm wide flexible strips single color. The connector slides over the flexible strip, super fast flexible strip connections. Has the wires to hook up to power supplies or extension wires.

Rebaydo 2pcs Cable T5 Tube Light 3 Conductor White 39 Inches

Product Code: 68965

Rebaydo 2pcs Cable T5 Tube Light 3 Conductor White 39 Inches featuring a white 3 conductor cable plug assembly with plug on one side and bare pig tail wires on the other side. The center hole is larger for compatible connections. Designed for use with T5 and T8 lights as well as other compatible devices and appliances. Cable length is 39 inches.

Female Connector 5.5mm x 2.1mm to Screw Terminals

Product Code: 74377

Female connector 5.5mmx2.1mm to screw terminals, Use this to connector a round plug to screw terminals. CE and Rohs listed.

Rebaydo 2pcs H1 Socket with Wire

Product Code: 45746

H1 Adapter/Converter sockets. Use these sockets to make your own H1 LED Driving light or standard H1 light. Approximate size is .93in x .31in x .46in. Also 5 inches of wire. The wires are 18 awg. Use this harness for relays, flashers, headlights, fog lights, driving lights.

Connector, male and female Set, Crystal DC Plug 5mm

Product Code: 67841

Connector for flexible strips, includes both male and female part with wires and a cap. CE and Rohs listed. The insulating material is clear crystal look. The wires approximately 6" long. The male part is 5mm diameter with 2.1mm female connector in the center.

Page 38

Harnesses/Connectors

LED Light Bar Work Light Wiring Kit Single Channel Low Voltage 12 Volt

Product Code: 67238

LED Light Bar Wiring Kit Low Voltage 12 Volts. Saves time and money. Complete Plug and go wiring kit to hook up your light bars and work lights to your vehicles power source. Wiring harness includes an On/Off switch, a 30 Amp. fuse, and 40 Amp relay with solder less spade connections. Entire harness measure 79 inches in length. Harness can handle a maximum load of 16 Amps. This kit has both positive and negative wire connectors for the light bar.

Rebaydo Switch with 5.5mm/2.1mm Round Female and Male Plug

Product Code: 89759

Rebaydo Switch with 5.5mm/2.1mm Round Female and Male Plug designed to turn LED lighting on and off, works as a 12 Volt light switch, works with flexible strips and low voltage bulbs. CE and Rohs listed rocker switch with 35cm (14") wire length for easy installation and hookup. Compatible with low voltage lighting applications operating from 3-24V at 50/60Hz. Available in black or white color for versatile lighting control applications. Use power supply such as 65987 for easy hookup.

Multi Color Female to Male LED Light Harness

Product Code: 34423

Multi Color Female LED Light Harness great for RGB flexible LED Lights. Approximately 23" long. Comes with both a male and female connectors at each end. Use to illuminate multiple color flexible led lights.

USB male to 5.5mmx2.1mm male Connector

Product Code: 78244

Use this USB harness to connect a USB port to 5.5mmx2.1mm male connector. Please check power output and voltage output on the usb port you are plugging into. CE and Rohs listed.

Rebaydo 4pcs Scotch Lock Quick Connector

Product Code: 78695

Rebaydo 4pcs Scotch Lock Quick Connector uses an I.D.C. insulation displacement connector design to easily connect and crimp two 18 AWG wires using a pair of pliers. Designed to provide a reliable IDC connection that lasts for years. Dimensions are 1.2in x 0.73in with an electrical rating of 3V-24V and 50/60Hz operation. Operating temperature range is Celsius -30 to +170 with environmental and work environment temperature range of Celsius -20 to +70. Operating humidity is 30%-65% with IP5 protection class and low ventilation. CE and RoHS listed.

Connecting Wire/Harness

Product Code: 56483

Connecting wire. Use these pre made connector wires to wire your LED Lights, relays, load equilizers or other equipment. Only need a crimp tool or a good pair of plyers to attach connecting wire. Available in 16,18,20,and 22 A.W.G sizes. Approximate size is 5in x .15in x .31in.

1/2" Round LED Rope Light T Connector NCNRNW

Product Code: 76853

1/2 Round LED Rope Light T Connector. Use this T conector to connect 3 L.E.D. Rope Light together. Using this T connector save time and money to connect LED Rope Light to two other LED Rope Lights. This product measures approximately 2.30 inches by 1.65 inches by 0.82 inches with about a 0.77 inch thickness.

Page 39

Harnesses/Connectors

9V Battery Connector Harness Female with Red and Black Wires

Product Code: 48565

9V Battery Connector Harness. Use this high quality connector that has battery snaps to properly connect a 9 volt transistor battery. Use this 9 volt plug to connect low power led lights. Approximate overall length is 6.5 inches. Perfect when you need a compact 9V snap connector in your project. This 9 Volt battery connector works great for hobbies such as doll houses, model railroad, radio control cars and boats. This battery clip works excellent for a class science projects.

Page 40

LED Light Controllers

DMX 512 Address Editor NCNRNW

Product Code: 33213

DMX 512 Address Editor. Includes 12 VAC adapter to plug into wall and convert 120 VAC to 12V DC. The unit allows DMX commands to be sent to DMX controlled LED Lights. This product measures approximately 8.30 inches by 5.53 inches. This product is a Non-cancelable, Non-Returnable, No Warranty product.

Rebaydo Dimmer Low Voltage One Channel 8A 12-24VDC

Product Code: 29463

Rebaydo 1pc low voltage LED dimmer controller with stepless dimming, designed for smooth brightness control of low voltage devices such as flexible LED strips, LED bulbs, low voltage tube lights, and other DC lighting loads, available in DC 5V, 12V, or 24V versions (please specify on order), single channel output with output current approx. less than 8A, maximum output power approx. 40W at 5V, approx. 96W at 12V, and approx. 192W at 24V, static power consumption less than approx.

Rebaydo Controller 12 Volt 360 Watt 10 Amp 3 Channel Common Anode

Product Code: 32443

Rebaydo 2pcs high power RGB controller with RF remote designed for multi-channel LED lighting control, supporting 3 output channels for RGB or multi-zone DC lighting systems, compatible with DC 12V–24V input and supporting output options of 5V, 12V, or 24V (must be specified), rated for up to approx. 8A per channel with less than approx. 10A max per channel depending on setup, maximum output power approx. 150W at 5V, approx. 360W at 12V, and approx. 720W at 24V, includes controller-mounted buttons plus 8-button RF remote with approx. 100 ft control range for wireless operation, static power consumption less than approx.

Waving Infrared Sensor Switch 12-24VDC 5.5mm Connectors

Product Code: 35987

Waving Infrared Sensor LED Light Switch 12-24VDC. The two infrared sensors are at the top of the controller. Uses only 3A. 36 watt output at 12VDC, and 72 watt output at 24VDC. Input wire measures ~3.94" and output wire ~ 7.87". Switch measures ~ 1.21" x 0.34" x 1.50". Great for LED cabinet lights, Desks lamps and much more. Wave your hand in front of sensor within 6 inches to turn on. To turn off wave you hand in front of the sensor within 6". If you stop waving your hand in front of the sensor , the sensor will twinkle 3 times. Sensor sensitivity range up to 6 inches. 5.5mm female input Connector and 2.5mm male output connector. Input cable about 4" long. Output cable about 8" long.

LED Touch Controller RGB RF 12-24V 6A 216W 3 Channel

Product Code: 54643

RGB LED Controller, 3 Channel Red, Green, Blue, or what colors you want to use. 12-24V DC, Max 6 amps per channel. Available common anode. Use common anode controller for LED Strips and LED Tubes that use common anode configuration. You can use our LEDLight.com power supply 65987 or you can hook up your own power supply 12-24VDC. The RGB color wheel is really easy to use and get operating to your RGB needs. RF remote works up to 60 feet. On/Off power button, brightness, and control buttons. You have dimming, jumpy gradual changing, strobo flash and other effects. Can be used with flexible strips, wall washer, modules that offer individual color control. Dimensions: Approximately H: 3.35 in X L 2.56 in X W .94 in. Rohs listed. CE certified. 2.765" center to center distant for the mounting ears. Uses 3 AAA batteries for the remote. Static power is .5 Watt.

Rebaydo LED Touch Dimmer & Power Switch 12-24VDC 5.5mm Female and 5.5mm Male Connectors

Product Code: 19548

LED Touch Dimmer & Power Switch 12-24VDC. Up to 3A output. Up to 36 watt output at 12VDC, and 72 watt output at 24VDC. Input wire measures ~3.94" and output wire ~ 7.87". Switch measures ~ 1.21" x 0.34" x 1.50". Great for low voltage LED cabinet lights, LED flexible strips, LED panel lights and much more. 5.5mmx2.1mm male and 5.5mmx2.1mm female Connectors. If you touch the dimmer metal body for less than 5 seconds the light shuts off. If you touch the metal dimmer body for more than 5 seconds the light will get brighter or touch the metal body again and the light will get dimmer. The dimmer switch uses capacitance touch. During the dimming process the led bulb or light will not flicker. It can be used as a on/off switch. Works great with LEDLight.com power supply product code 65987 and our customer harness 67452.

Rebaydo Dimmer DC Terminal 12-24VDC One Channel 24W

Product Code: 22572

Rebaydo 1pc Dimmer DC Terminal 12-24VDC One Channel 24W designed for use between a power supply and low voltage tube lights. Features approximately 4 inches of wire on each side with standard 5.5mm x 2.1mm male and female plugs for easy no-tool installation. Knob-operated brightness control allows smooth dimming adjustment from off to full brightness. Supports DC5V, 6V, 12V, and 24V operation with one channel, output current under 2A, 24W output, and static power consumption below 1W. Controller dimensions are 61 x 33 x 32 mm with total assembled length of 20.04 inches. Suitable for low voltage dimmable DC LED lighting, tube lights, and infrared motion operated LED lighting systems. Working temperature range is -20°C to 60°C. Cutting connectors to splice wires voids the warranty.

Page 41

LED Light Controllers

Rebaydo Radio Control RGB LED Light Controller 12 Volt 144 Watt Common Anode

Product Code: 34531

Rebaydo 1pc Radio Controlled RGB LED Controller 5V 12V 24V 3 Channel Remote is a compact and efficient controller designed for externally color-changing RGB LED products, supporting common anode systems and utilizing radio frequency remote control for convenient wireless operation, with a 3-channel output configuration and compatibility with DC 5V, 12V, and 24V systems, delivering output current of less than 4A per channel and output power up to 60W at 5V, 144W at 12V, and 288W at 24V, featuring low static power consumption under 1W and operating within a temperature range of -20°C to 60°C, the controller box measures approximately 2.52 inches in height, 4.04 inches in width, and 0.93 inches in thickness with an antenna length of 5.33 inches, while the remote measures approximately 3.35 inches by 1.44 inches by 0.61 inches, with external dimensions of 128 x 65 x 25 mm and a net weight of 160.5g and gross we

Repeater Amplifier 3 Channel 12 Volt DC Common Anode

Product Code: 54324

3 channel RGB constant control, the max current of each channel up to 5A. Can be used with 12 VDC tube lights and flexible strips, our 12 VDC automotive lights, or your own 12 VDC light source. 5 amps per channel. The controller operates 12 VDC. Works great in applications of business spaces, airports, subways, lighting for hospitals, hotels, marketplaces, dining-rooms, signboard and billboards, bars and clubs. Unlimited synchronization of 3 channels of colors. Up to 11 feet of 12 VDC tubing or 62 feet of flexible strip can be operated per 3 channel repeater. Can only be used with common anode products. Please use part number 74324 for RF controlled synchronized LED Lighting. Any 12 VDC product can be synchronized using either the repeater or the RF controller.

Controller Led 3 Channel Common Anode 12V DC

Product Code: 42363

Use this RGB controller with the flexible RGB light. For synchronized RGB Color effect. Up to 12 feet of flexible RGB lights can be synchronized together. There are no use controlled settings, once power is applied the unit will cycle the colors. Easy installation, plug one end of the flexible strip into the 4 prong end of the controller and then plug either the power supply/transformer male plug (not included) or LED Tube custom harness (not included) into the other end of the controller box. For common anode RGB products. Works with 12 Volt DC led lights.

RGB DMX Controller 12V DC 300W Master/Slave Synchronization

Product Code: 58736

RGB Controller 12 Volt DC 300 Watt Master/Slave Synchronization. Use this controller for long RGB synchronization effects. Each controller can be wired together for very powerful RGB effects using a master slave setup. This LED controller measures approximately 8.30 inches by 5.53 inches. Can only be used with common anode products. Operating tempature -20 to 60C. Supply voltage 12 Volts. Dimensions 183x138x47mm. Output three CMOS drain-open output. Max load current 4 Amps each color or channel. Common anode. Control mode is the mode function button, pressed once, color/style changed by one, there are 14 changes in all. Presss button UP to speed up color changing, press down to slow down.

LED Mini Controller 1 Channel/Color DC12V 6A 72W

Product Code: 65846

Rebaydo 2pcs LED Mini Single Color Controller designed for single color LED lights, tubes, and strips with ultra slim body and easy 3 key operation. Features 5 dynamic modes, 256-level PWM control mode, 6-level speed adjustment, 8-level brightness adjustment, and auto memorize function. Rated for DC12V 6A 72W with maximum output power up to 144W and maximum output current of 12A. Working voltage range DC 8~16V / 5-24V and operating temperature range from -30°C to +75°C. Suitable for LED devices drawing no more than 6 amps at 12VDC or 72 watts total power.

Rebaydo Controller 12 VDC Common Anode

Product Code: 35675

Rebaydo 1pc RGB LED Controller Common Anode 12VDC designed for controlling 12 Volt common anode RGB LED systems with plug-and-play installation for standard American wall receptacles. Features ultrathin RF 6 key remote control with ON/OFF, mode selection, brightness adjustment, and speed adjustment functions. Supports 16 lighting modes including static colors, flash modes, jumpy change, and fade change functions. Input voltage AC90-260V 50/60Hz with 3 channel output, output current under 4A per channel, and output power under 144W. Approximate dimensions are H: 3.09 in x L: 4.88 in x W: 3.09 in. Working temperature range is -20°C to 60°C. Includes overpower, overvoltage, and high-temperature defensive functions. Conforms to UL safety requirements. Includes power cable and RF remote.

Infrared Sensor Switch 12-24VDC 5mm Connector

Product Code: 21945

Infrared Sensor LED Light Switch 12-24VDC. Detects the human body as motion. Can operate up to a 3 Watt load @ 12 or 24 VDC. 36 Watt output at 12VDC, and 72 Watt output at 24 VDC. Input wire measures ~3.94" and output wire ~ 7.87". Switch measures ~ 1.21" x 0.34" x 1.50". Great for LED cabinet lights and much more. Mount behind cabinet door, when door opens the switch will turn your lights on, and turn them off once door is closed. The input connector is female plug 5.5 mm and 2.1mm tip. The output connector is male 5.5mm and tip 2.1mm. Sensor range up to 18 inches. The motion turn the light on or off instantly when motion detected and turns the light on or off when there is no motion.

Page 42

LED Light Controllers

Rebaydo Water Resistant Controller 3 Channel Common Anode

Product Code: 52312

Rebaydo water resistant RGB controller with RF remote designed for reliable 3 channel LED lighting control in moisture-prone environments, ideal for use on houseboats, boats, docks, marinas, slips, and outdoor low voltage lighting installations, common anode design with three output channels rated at approx. 4A per channel and up to approx. 12A max total load, compatible with DC 5V, 12V, 18V, or 24V systems depending on selected configuration, maximum output power approx. 60W at 5V, approx. 144W at 12V, and approx. 288W at 24V, water resistant housing helps protect against moisture and splash exposure so you do not have to worry about water damage in marine environments, includes both controller and RF remote, remote control range approx.

Rebaydo 2pcs LED Mini RGB LED Controller Common Anode 12VDC 6A 72W 3 Channel

Product Code: 58498

Rebaydo 2pcs LED Mini RGB Color Controller is a compact 12V DC RGB lighting controller designed for tight installation spaces, featuring 19 dynamic modes, 20 static colors, and 256-level PWM control for precise brightness and speed adjustment with 5 levels each. It operates as a 3-channel controller with up to 2A per channel and supports total output up to 72W at 12V DC or up to 144W depending on configuration, with a maximum output current of 3 x 4A and working voltage range of DC 8~16V / 5~24V. Designed for common anode LED systems, it includes auto-cycle dynamic mode, memory function, and simple 3-key control for mode, color, and brightness adjustments. The unit operates within temperature ranges of -30°C to +75°C and -20°C to 60°C depending on usage conditions, and measures approximately 42 x 12 x 3 mm (approx. 0.47 in x 1.65 in x 0.12 in).

Rebaydo Dimmer Touch 12 Volt Low Voltage 96W 1 Channel 8A

Product Code: 63424

Rebaydo 1pc LED Touch Single Color Dimmer is designed for 12-24V DC lighting applications, providing smooth stepless dimming control from 0% to 100% using a touch-operated interface for single-color LED products including LED lights, modules, and ribbon lighting. This dimmer supports one channel with a maximum output current of 8A and power capacity up to 96W at 12V DC or 192W at 24V DC, with static power consumption under 1W and operating temperature range of -20°C to 60°C. It features screw-down style wire connections for secure installation and has approximate dimensions of H: 1.4 in x L: 3.5 in x W: 2.3 in, gross weight of 98g, making it suitable for various constant voltage LED dimming applications.

Touch Controller 1 Color RF 12V 6A 72W

Product Code: 84654

LED Touch Controller 1 Color RF 12V 6A 72W 1 Channel. Very Nice controller to control 1 channel of light. 12 Volts DC, up to 6 amps, max power 72 watts. RF Touch controller makes easy change of brightness. Includes touch dimmer remote control and 72 watt 12 volt 1 color controller. RF remote works up to 60 foot range wirelessly, it does not use IR so you do not have to point remote at controller. Multi function led controller adjust color temperature of products that have input for warm white and input for white. 20 grades of brightness by dimmable remote. Remote uses 3 AAA battery. Great for flexible strips that have color temperature adjusting or single color strips tubes or led lights that are low voltage dimmable type. If used for color temperature adjustment, then common anode light with both warm white and white inputs or what ever two colors you choose. RF wireless frequency 433.92Mhz.

Rebaydo 2pcs RGB LED Strip Light Amplifier Repeater 12V 9 Amp 102 W 3 Channel

Product Code: 45876

Rebaydo 2pcs RGB LED Strip Amplifier Repeater 12V 3 Channel is a compact and efficient solution for extending flexible LED strip lighting and low voltage tube lighting installations that require additional power handling. Designed with a slim profile for easy installation in tight spaces, this amplifier features three output channels and supports cascading for extended lighting runs. It operates within a DC 8–16V range with a maximum power rating of 102W at 12VDC and supports output power up to 144W with a maximum current of up to 3A–4A per channel. Built with an embedded control IC chip, it ensures high efficiency, low heat output, and includes wrong wiring protection for added safety.

Rebaydo Amplifier 12V 144W 3 Channel 4 Amp Common Anode

Product Code: 85457

Rebaydo 1pc RGB LED Amplifier Repeater 12V 3 Channel 4A is a compact RGB signal booster designed to repeat and synchronize RGB LED control signals over long distances, ensuring stable and consistent color output across extended LED strip, tube, or module installations, and enabling unlimited system expansion by linking multiple amplifiers together, supporting DC 5V, 12V, and 24V optional input voltage with 3-channel output and output current of less than 4A per channel, delivering up to 60W at 5V, 144W at 12V, and 288W at 24V, featuring low static power consumption under 1W and operating within a temperature range of -20°C to 60°C, compatible with both common anode and common cathode RGB systems, constructed with a durable anodized brushed aluminum housing for efficient heat dissipation and long-term stability, with external dimensions of approximately L105 x W65 x H25mm (0.98 x 3.09 x 2.56 inches), and inc

Rebaydo LED Dimmer Controller with Remote

Product Code: 89435

Rebaydo 1pc LED Dimmer Controller with Remote designed for dimming 12 Volt DC LED lights and other low voltage LED devices using RF radio frequency technology. Rated for 4 Amps current with maximum current capacity of 6 Amps at 12VDC. Suitable for decorative LED lighting applications with full ON/OFF and dimming functionality. The remote control allows LED lights to dim up and down smoothly and can be used with low voltage LED tubes and other 12 Volt DC products. Recommended accessories include harness 94350 for connecting to LED light power supply, harness 67452 for connecting to 12V tube lights, and 65987 12 Volt power supply for illuminating compatible dimmable 12 Volt DC LED products.

Page 43

LED Light Controllers

LED DMX512 Controller 6Ax3 Channel 216 Watt 12-24VDC Common Anode

Product Code: 75864

LED DMX512 Controller. Input for this controller is 12-24VDC. Output is 12VDC, 6Ax3 Channels or up to 216 Watts. Available Common Anode only. Controller dimensions are approx. ~ 5" x 1.65" x 1.30". Great for use with LED RGB flexible lights, RGB modules or any 3 color led lights.

Rebaydo Dimmer 12VDC 96 Watt 8 Amp Channel

Product Code: 64843

Rebaydo Infrared Remote LED Dimmer Controller 5V 12V 24V 8A Single Channel is an intelligent low voltage dimming controller designed using advanced PWM (Pulse Width Modulation) digital dimming technology, allowing stepless brightness adjustment via both infrared wireless remote control and manual knob operation, with 255 grayscale levels, delay shutdown function, and fixed grayscale output for customized lighting control, suitable for a wide range of LED lighting applications including point light sources, flexible LED strips, wall washer lamps, and glass curtain wall lighting, and ideal for residential, commercial, RV, camper, and marine environments; the unit supports DC 5V, 12V, and 24V input with output current less than 8A and output power up to 40W at 5V, 96W at 12V, and 192W at 24V, features low static power consumption under 1W, operates within a temperature range of -20°C to 60°C, includes a single

RGB Controller Low Voltage Common Anode 12 Volt DC 72 Watt

Product Code: 68754

RGB Controller Low Voltage 12 Volt DC 72 Watt. Very simple RGB Controller for remote controlled rgb effects. Easy installation requires you to plug one end of the flexible strip into 4 prong output wire and then plug the LED Tube custom harness (not included) into the other end of the controller box. The LED controller box measures 1.96in height, 1.38in wide and .86in thick. The remote measures 3.33in height, 2.02in wide and .27 thick. Can only be used with Common Anode Products.

RF LED Flexible strip controller 5 Volt DC

Product Code: 73532

Digital Electronic Flexible RF Controller. This product only works with our Electronic Flexible LED Lights. The controller allows for chasing LED Lights. The controller has built in features for specialized led light controlled electronic flexible led lights.12 Volt input with a output of 5 volt

DMX512 Decoder 12VDC Output 8A x 3 Channel

Product Code: 88759

DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED; You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures. Input 12VDC. Output 3 Channels up to 8A or 288 watts. Product dimensions approx.: 6.50" X 2.68" X 1.57".

RGB Flat Rope Controller 12 VDC Common Anode

Product Code: 45845

RGB Flat Rope Controller 12 VDC Common Anode NCNR. This product connects to the RGB Flat Rope product 68497. This product is 12 volt output. Allows for control of LED colors and offers a professional appearance. This product is approximately 32" in overall length.

DMX Controller for Digital Tube NCNR

Product Code: 43522

DMX Controller for Digital Tube. This controller only works with Digital LED Tube part number 34522. The digital unit has LCD display, 120 VAC wall power pack. With this controller allows the DMX Digital LED Tube to light up. This product measures approximately 4.92 inches by 9 inches with a thickness of 1.95 inches.

Page 44

LED Light Controllers

Rebaydo RGB Dimmer 12VDC/108W 3 Channel 3A Common Anode

Product Code: 52532

Rebaydo 2pcs RGB 3 channel dimmer controller designed to control red, green, and blue lighting channels using 12V DC power, compatible with common anode RGB modules, flexible LED strip lights, and low voltage LED tube lighting systems, can also be used as a general 3 channel dimmer controller for independent low voltage circuits, each channel supports up to approx. 3A at 12V DC with maximum output power of approx. 108W total, simple and easy-to-operate design built for long service life and reliable RGB dimming performance, static power consumption less than approx. 1W, operating temperature approx. -20°C to 60°C, connect the load wires first followed by the power wire and ensure no short circuits are present before powering on, dimensions approx.

DMX 512 Controller Desktop

Product Code: 97886

DMX 512 Controller. Use this DMX controller to control your DMX compatitable LED Lights. This way you can synchronize your DMX LED Lights so they all are same color and brightness or different choice in color and brightness. Votlage is 120 VAC. uses 8 Watts. 20 Channels, 30 Bannks, 8 Scene, auto-running mode, Fade select, speed X/Y, chase and black out . LCD Display, Auto protection. Very easy to edit great for theatre and stage.

Rebaydo Controller DMX512 12 Volt 6 Amp 3 Channel Common Anode

Product Code: 77859

Rebaydo 1pc DMX512 LED Controller RGB Decoder 12–24V 3 Channel 6A with RF Remote is a professional DMX512 signal decoding controller designed to convert standard DMX-512 digital control signals into PWM output for precise RGB LED lighting control, using an advanced micro-control unit to ensure stable and accurate signal conversion while supporting both DMX console operation and RF remote control for flexible lighting adjustments, enabling smooth RGB color mixing and dynamic lighting effects across LED strips, modules, and architectural lighting systems, supporting DC 12V to 24V input voltage with 3-channel output and output current of less than 6A per channel, delivering up to 144W at 12V and 288W at 24V, featuring 256-level grayscale control per RGB channel, PWM output frequency of 5.2KHz, RF remote frequency of 433.9MHz, and operating temperature range of -20°C to 60°C, equipped with RJ45 standard DMX inp

Controller RGB Controller Common Anode

Product Code: 56432

Works great with common anode RGB flexible strips and led modules. Just hook up the led colors Red, green and blue to the controller output and apply 12 volts dc to the imput. Then you can cycle colors, rate and of/off with RF remote controller. Great for deco back lighting, great for bars, display cases, windows and LED signs.

Page 45

MR 16

Rebaydo 2pcs MR16 GU5.3 Base Three 1 Watt LED 12 Volt AC Or DC

Product Code: 95223

Rebaydo 2pcs MR16 LED Bulb GU5.3 GX5.3 12 Volt AC/DC 3 Watt designed for low voltage lighting applications requiring efficient light output and reduced heat generation. Produces up to approx. 300 lumen output while consuming only approx. 3 watts of power. Available in White 6000K-7000K and Warm White 2800K-3300K color temperatures. Features a 30 degree beam angle controlled by LED optics rather than a reflector. Operates on approx. 12V AC or DC systems and is compatible with GU5.3 and GX5.3 sockets. Long life up to approx. 30,000 hours. Comparable to approx. 25W to 35W incandescent bulbs and provides greater light output than approx. 25W to 30W halogen bulbs while generating less heat. Contains no ultraviolet (UVA, UVB, UVC) or radio frequency (RF) emissions and can be dimmed with a variable AC or DC voltage supply.

MR16 5 Watt LED 12V AC or DC GU5.3 Dimmable

Product Code: 46345

MR16 5 Watt LED. Has a Multifaceted Reflector. Operates 12V AC/DC GU5.3 male base, 38 Degree Multifaceted Reflector controls how the beam is made. The MR16 is dimable using a dimming power supply. CE, ROHS, RU, UL & ETL listed. Uses only 5 watts, comparable to a 45 watt light bulb. GU5.3, GX5.3 male Base. Uses MCOB technology, for the newest in LED Lighting technology. Available in White 6000K, Daylight white 4500k and warm white 3000k. 2.25" long and 1.95" wide, MR16 pins are .26" apart. Up to 30,000 hours. Comparable to a 45 to 50 Watt incandescent MR16 but only uses 5 Watts of power. Less heat and less power using a led versus a incandescent bulb. The GU5.3 male base is push to fit in a GU5.3 female socket. Some old transformers might need to be replaced when upgrading from Halogen to led MR16. Compatible with: bpbab20wmr16 BAB.

MR16 Three One Watt Ultra Bright LED Light 12 Volt AC/DC

Product Code: 23125

GX5.3 GU5.3 base 260 Lumen output. Greater than 30 Watt incandescent equivalent. 3.0 Watt power consumption. Available in white 5000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. GX5.3 base. Voltage 12V AC or 12V DC. 1.96 inches diameter x 2.52 inches height. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. CE & ROHS Great light for reading!

MR16 One by 3 Watt LED Light Bulb

Product Code: 29475

MR16 One by 3 Watt LED Light Bulb. GX5.3 Base. Available in white only. Very nice looking MR16. Chrome heat sink. Has 1 3 Watt High Power LED Light with specail molded lens. 12V DC. This product measure approximately 2.04 inches by 1.97 inches by 0.66 inches. IP Class: 50. Weight: 0.05KG. CE and RoHS listed. Luminous Efficacy: 80%. Lumen maintenance: 165Lm. Beam angle: 30 Degrees. LED Watts: 3 W. Unit Watts: 3 W. CRI: 80Ra.

LED MR16 GX5.3 GU5.3 10 5050 SMT LEDs 12V AC/DC Dim-able

Product Code: 54684

LED MR16 10 5050 SMT LEDs. GX5.3 Base. 12 volts AC/DC. Dim-able with a variable voltage supply. Available in white 6000K only. Operates cool to the touch lasts upto 50,000 hours. This product measures approximately 1.90 inches by 1.95 inches. Weight: 37G. CE and RoHS listed. Luminous Efficacy: 90 Lm/w. Lumen maintenance: 90%. Beam angle: 120 Degrees. Forward Lumen: 120Lm. LED Watts: 0.18 W. Unit Watts: 1.2W. CRI: 70. Comparable to a 10 to 20 Watt halogen bulb. Viewing angle 120 degrees. Has a lens.

MR16 3x1.2 Watt LED Lights 12 Volt AC/DC

Product Code: 86797

MR 16 LED Light Bulb. Uses 3 1.2 Watt CREE XRE P3 and Q3 LEDs. 12 Volt AC/DC. Each Cree LED puts out up to 90-105 Lumen. Low voltage 12 Volts. Viewing angle of 45 degrees. AC/DC Comparable to a 15 to 25 Watt incandescent light bulb. CE and Rohs listed.

MR16 LED Lamp 12V AC/DC 6 Watt 30 Deg Dimmable

Product Code: 94563

The MR16 CREE LED Lamp operates at 12 volt only, works with 12 Volt AC or DC current. It uses 3-2 watt CREE LEDs with at total unit wattage of 6 Watts. You get up to 550 lumens or 43 CP candle power. Up to 50,000 hours when you buy this MR16. CREE LED Lights are known for their quality and longevity. The CREE LED Lamp is CE, RoHS Listed. You get about 110 lumen to 1watt of 12V power (110Lm/1W/12V). It comes in White (6000k), Daylight White (4800k) and Warm White (3000k). 30 Degree viewing angle. Dimmable with a variable power supply.

Page 46

MR 16

MR16 3 Watt Ultra Bright Low Voltage 12V AC/DC

Product Code: 32432

MR16 Ultra Bright LED Light. 12V AC or DC. Uses 3 ultra bright CREE LEDs for long life. 350 lumen output and only uses 3 watts of energy. Comparable to a 30 watt incandescent equivalent. The heat sink is a 2nd generation design for better cooling for longer LED life. Approximate size is 2.31in x 1.89in.

3W MR16 Bulb LED 12 Volt AC or DC

Product Code: 44324

3W MR16 Bulb with gu5.3 base. Has one high power 3 Watt LED. Available in White 6000K. 2nd Generation metal heat sink. Up to 120 lumen output and only uses 3 watts of energy. Comparable to a 25-35 watt incandescent equivalent. Operates 12 Volts A.C. or 12 Volts D.C. This LED Light bulb measures 2.22in x 1.96in. Comparable to a 20 to 30 Watt incandescent light bulb. Long life up to 30,000 hours. CE and Rohs.

MR16 12 SMD 5050 3 Chip 8-30 VAC-VDC Dim-able

Product Code: 57463

MR16 12 SMT 5050 (3 Chip) 8-30 VAC/VDC. Available in white and warm white. Uses 2.6 watts. Comparable to a 20 watt incandescent equivalent. Very low cost LED Light replacement using SMD technology. Fits Gx5.3 base. Long life up to 30,000 hours. 120 degree viewing angle. Up to 350 Lumen output. CE and Rohs listed. Wide voltage range from 8 to 30 V. Dim-able with a variable voltage supply. Available in White 6000K and Warm White 3000K.

MR16 GX5.3 GU5.3 18 LED Bulb 12V AC-DC Dim-able Lens

Product Code: 64224

MR16 18 LED Bulb 12V AC/DC Lens GX4.0. Up to 70 lumens. 120 degree viewing angle. Use this economical low cost MR16 for low voltage 12V AC or 12V DC applications. Such as landscape, driveway, kitchen, living room lighting. Long life 30000 hours or longer. White 6000K. 30 degree viewing angle. Comparable to a 10 Watt incandescent bulb. This led bulb is dim-able. Reflector is made of glass and has a glass lens. CE and Rohs.

MR16 4 Watt LED High Power 12V AC-DC 60 Deg G5.3

Product Code: 94894

GU5.3 MR16 High Power CREE LED Light is 12 Volt AC or DC. Total unit wattage of 4Watts. You get about 101 lumen a watt (112.5Lm/12V/Watt). 3 by 1Watt CREE LED lights that give you true color (CRI80). This product is CE and RoHS Listed. The beam angle is 60° great for putting 450 lumens of light where you need it. Up to 35 CP Candle Power. It comes in White (6000k), Daylight White (4000k) and Warm White (3000k). The ingress protection is 40 (IP40). This light is great your low voltage needs great with solar panels. Use it in your display case so you don’t have to worry about excess heat. Dim-able with dimming power supply.

MR16 7 SMT LED Light 12 Volt AC/DC

Product Code: 43442

140 Lumen output. 15 Watt to 25 Watt incandescent equivalent. 2.5 Watt power consumption. Available in white 5000 Kelvin or warm white 3000 Kelvin. 120 Degree viewing angle. GX5.3 base. Operating voltage 12V AC or 12V DC. 1.92 inches diameter x 2.56 inches height. 75 CRI Rating. 36x.06W smd LEDs. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. IP Class: 56. Weight: 0.75KG/pcs. CE and RoHS listed. Luminous Efficacy:50-57.5LM/W. Lumen maintenance: 200/230Lm. Forward Lumen(white): 115Lm. Forward Lumen(warm white): 100Lm. LED Watts: 0.5 W.

MR16 60 SMD 3528 LED Light Low Voltage 12 Volt

Product Code: 74633

MR16 60 SMD 3528 LED Light. Uses only 3 watts of power. 60 SMT 3528 LEDs. Low voltage 12 Volts AC/DC. GX5.3 Base. Low profile. 240 Lumen output. Availble in white 6500K

Page 47

MR 16

MR16 5 Watt LED Light 12 Volt AC/DC

Product Code: 95832

MR16 5 Watt LED Light 12 Volt AC/DC. Available in white only. 12 Volts. AC or DC. GX5.3 base. Up to 280 lumen output and only uses 5 watts of energy. Comparable to a 50 watt equivalent. Available beam width is 45 degrees. Very compact design. This LED bulb measures approximately 1.97 inches by 1.93 inches.

MR16 GX5.3 GU5.3 5 Watt 12 Volt AC or DC

Product Code: 45677

MR16, 5W, CREE, UL Listed, Energy Star listed. Operates on 12V A.C. or 12V D.C. Dimmable with a variable power supply. GU5.3 Base. Low power consumption and long life. Long warranty 1 year. Up to a 45 watt equivalent. 40 degree viewing angle. GX5.3 base, GU5.3 base. This bulb has been upgraded to multi led bulb that is different than shown in the video. Up to 350 Lumen output. CE and Rohs.

LED MR16 3 Watt RGB Light 12VDC with Remote

Product Code: 54845

LED MR16 3 Watt RGB Light with Remote. You can change colors of your MR16 by remote control. Low voltage bulb. Operates at 12 Volts AC/DC. GX5.3 Base. This led measures 1.97 inches by 1.86 inches. Remote control functions include ON AND OFF, LIGHT INTENSITY, RED, GREEN, BLUE, WHITE, FLASH, STROBE, FADE, and SMOOTH. Approximately 200 lumen output. 1 Remote will control multiple LED bulbs. Upto 30 foot range with remote control.

MR 16 60 SMD 3528 85-260VAC GU5.3

Product Code: 65945

Use this MR 16 with line voltage powered lighting. 6000K. If you need a 85-260 VAC MR16 please use this energy saving 60 SMT LED. Approximate 3.5 watts. Comparable to a 35 watt incandescent MR 16. GU5.3 base. ROHS and CE rated. This led measures 1.84 inches by 1.72 inches. 80 degree viewing angle.

MR16 GX5.3 12 SMD 5050 12 Volt AC-DC

Product Code: 36823

150 lumen output. 12 SMD 3 Chip MR16. GU5.3 Base. 120 beam. 12V AC or DC. Available in white. Approximate 150 lumen output. Operates cool to the touch. Really helps drop temperature in same room with LED MR16. Great for spot and accent lighting. This LED light bulb measures 1.84in x 1.94in. 2.6 watts.

MR16 3 Watt LED Light Remote Controlled

Product Code: 15487

MR16 LED Light Remote Controlled. This MR16 can be controlled via remote controller. You and dim, turn on, turn off the MR 16 LED Light bulb using battery operated remote controll. The MR16 operates low voltage 12 Volts DC or AC. This bulb measures approximately 1.88 inches by 1.96 inches

Page 48

Other

Rebaydo 2pcs LED Module 5 SMD 5050 12 VDC 1.2 Watt IP65

Product Code: 23461

Rebaydo 2 pcs LED module with 5 SMD 5050 chips producing up to approx. 80 lumens output. Operates at approx. 1.2 W on approx. 12 V DC with a long life of up to approx. 50,000 hours. Features a water-resistant design rated approx. IP65 and emits a white color temperature of approx. 6000K. Both wires are white, with the positive wire identified by grey stripes. Approximate dimensions are approx. 1.41 in × approx. 1.41 in with thickness approx. 0.21 in. Designed for signage lighting, accent lighting, backlighting, and other low-voltage LED applications. Ensure correct polarity during installation and use an appropriate 12 V DC power supply.

Drop Ship Fee

Product Code: 32967

Drop Ship Fee.

Work Light Rechargeable 20 Watt

Product Code: 96124

20 watt work light. 5200 mAh battery, 3.5-4 Hour battery time, comes with automotive cigarette lighter plug length 4 foot and household wall adapter length 4 foot, up to 1800 lumen output, 120 viewing degree. Adapter UL listed. The body color is yellow, the color output is 6000K white. UL, CE and Rohs listed. MCOB technology, multi chips on board. IP 65, white 6000K, comparable to a 140 watt to 175 watt incandescent bulb. What is nice since the trouble light is solid state, you do not have to worry about when you need it, that it does not have a broken filament. Great for buses, cars, camping, hiking, picnic, great to have ready to go when needed such as in the trunk for a flat tire repair. CRI>80, long life up to 30,000 hours for the MCOB. Uses a Li-Ion battery. This is a impact resistant led light bulb very rugged.

Off Road, Work 48 Watt 9-30VDC IP67 Square

Product Code: 45864

Current draw 1.8A @ 12V. 0.9A@24V LED Work Light 16 x 3 Watt Super Bright LEDs. Wide voltage range 9-30V DC. White 6000 Kelvin. 3155 Lumen output, very bright. Water Proof IP67 rating. Pmma plastic lens. Estimated 30,000 hour life. Diecast aluminum housing. Comes with angled mounting bracket and mounting bolts. Could be used for driving lights, four wheel roll bar LED lights, great for security for cabin, boat or house. 4 3/8" x 4 3/8 x 3". Other applications Cabin/Boat/SUV/Truck/Car/ATVs work truck, tow truck, fire truck, ambulances, police, fishing Deck or fishing dock. Extended warranty, please see product page for warranty information. Comparable to a 350 Watt incandescent light bulb. Since the led light is solid state you do not have to worry about a broken filament or glass. Easy for D.I.Y. installations.

Module 4 5050 3 Chip SMD 2 Side Mount Holes NCNR

Product Code: 58448

4 5050 3 Chip SMD Module with 2 Side mount Holes. This module has clear epoxy sealant to protect LED's from environment. Puts out up to 80 lumens and only uses .127 Amps of energy @ 13.8 Volt D.C. The Module is 12 Volt D.C. only. The module has both input and output wires so you can interlink them together. The module has double side adhesive foam so you can stick this module onto the surface. This product measures approximately 1.84 inches by 1.27 inches with a 0.15 in thickness. Adhesive backing measures 0.78 inches by 0.78 inches. There are 20 modules per segment. This item is an NCNR item.

LED Off Road Light 60 Watt 10-30VDC 60 Watt 30 Deg Black IP67 Round

Product Code: 67834

60 Watt LED Light. Great for driving, running, fog, work, boat, snowmobile, motorcycle lighting. 30 Degree viewing, wide voltage 10-30VDC. White 6000K. Includes stainless steel mounting bracket. Current draw 1.8A @ 12V. 0.9A@24V. Black Enclosure. Up to a 480 watt incandescent equivalent. 1). Cree chip for led work light, high quality. Great for fishing, camping, off road, sight seeing. 2). Easy installation, plug & play. 3). Low heat generation. 4). High brightness low power consumption. 5).

LED Light Remote Control Battery Operated

Product Code: 15456

Use this remote control battery operated LED light in your dark areas such as walk ways, cabinets, dresser, under the sink, tool box and other dark hard to see areas. Uses battery power so very low energy consumption. LED light measures approximately 4.95 inches by 2.06 inches. Cradle measures approximately 5.12 inches by 3.14 inches with a 1.26 inch thickness. Mounting holes are 3.25 inches apart. Remote measures approximately 2.59 inch by 1.41 inch with a 0.52 inch thickness. The LED Light fixture uses 4 "AA" batteries not included. One remote control, controls more than 1 light fixture. This remote bright light is very easy to install in dark locations such as Closet, Pantry, Cabinets, Bookcase, Hallway, Foyer, Staircase, Bathroom, Bedroom, Kitchen, Nursery, Laundry room, Attic, Basement, Garage, Shed, Office, Car, Truck, RV\'S, Boat, School, Dorm and much more! Infrared remote, range.

Page 49

Other

LED Trouble Light Rechargeable 10W House & Auto Charger

Product Code: 56946

Rechargeable LED trouble/work light. Has stand, rechargeable UL adapter and cigarette lighter plug for use without battery. 90-265V. 10 watts of led white 6000K. Very bright comparable to a 90-100 watt light bulb.

Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC

Product Code: 73853

Up to 300 Lumen output. Greater than a 25 Watt incandescent light equivalent. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. Hard wiring required. Operating voltage 12V AC or 12VDC. The wire is 2' long. The wire is 18 AWG. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for RVs, boats or where quick LED Lighting is needed. One per package. Comes with 3 wires, Brown wire= Positive (Hot), Blue wire= Negative, and Yellow wire= Ground. CE and Rohs.

Accent Light 3 Watt Low Voltage

Product Code: 43232

150 Lumen output. 45 Watt incandescent Equivalent. 3 Watt power consumption. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. The range of motion is 360 degrees swivel and +15 degree/-70 degree angle. Operating voltage 12V AC or 12V DC. The wire is 19.5" long. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for task or accent Lighting. One per package.

Recessed LED Fixture 12 VDC

Product Code: 43535

Recessed LED Fixture 12 VDC. Available in warm white 3000K. 20 forward firing LEDs, 135 lumen output and a 60 degree viewing angle. 12 VDC. This LED measures approximately 2.26 inches by 8.71 inches with a 0.95 inch thickness. Uses 300mA @ 13.8 VDC. 4.1 Watts power consumption. Equivalent to a 40 watt light bulb. Has mounting clips to secure from the inside. Can be mounted up to .16" sheet metal. Has a glass lens.

Module 3 LED 5630 SMD 12VDC 1.2 Watt IP67

Product Code: 26435

Bad neon sign, use these 3 LED 5630 SMD modules to replace your old neon sign, no more buzzing, no more paying a repairman to make a new NEON sign, DIY, do it yourself. 80-85 Lumens output. Comparable to a 10 watt incandescent.

L.E.D. Electronic Display

Product Code: 63456

Electronic LED Light Display, programmable. Easy installation, easy to use remote control. Select and display a message with a single button press. Program your own texts fast and simple, self-adhesive mounting. Powered from a 12V/24V lighter outlet with 1m. cord. LED Screen and adjustable legs measure approximately 16.70 inches by 3.18 inches. This products led screen approximately measures 14.5 inches by 3 inches by 2.54 inches with the leds measuring approximately 9 inches by 1.45 inches. The charger approximately measures 1.08 inches by 3.58 inches. The remote approximately measures 2.18 inches by 6.5 inches with a 0.63 inch thickness. Very easy to use with the infrared remote control. 120V power supply NOT included, Any of our LED 12V power supplies will work for this light.

LED Shower Head Light Bulb, Red/Green/Blue based on Temperature

Product Code: 94875

LED Shower head. Replace your shower head with this LED Shower head. This LED Shower head shows what temperature by the color of LEDs. No batteries needed. Has remote control so you can change colors of the LED Shower head. Easy to install just remove you shower head and install the LED Shower Head.

Page 50

Other

17" LED Light Bar 100W

Product Code: 23432

100 Watt LED Light Bar 10-30V DC IP67 10 * 10W LEDs. Up to 8600 Lumen output. Use this light bar as a work light, driving light, off road light. 1 Foot 5 Inches long and 3.28 Inches wide. Since it is 100 LED watts the comparable incandescent wattage is 100 watt super bright leds. Available in white 6000k only. Made with CREE LEDs for long life. Comparable to a 900 halogen light bulb.

LED Module 5 SMD Plastic Waterproof 12 Volt DC NCNR

Product Code: 45896

LED Module 5 SMD. Made of Plastic. Waterproof. 12 Volt D.C. This waterproof module comes with two mounting brackets for easy installation & a metal casing. Approx. Up to 90 lumen output. Uses 0.339 Amp @ 13.8 Volt D.C. This light measures at it widest points Approx.~ 3.38 Inch x 0.56 Inch x 0.25 Inch. Available in white 6000K only. NCNR. This led module is dimmable with a variable voltage supply. The voltage range is 8.33 Volts to 13.8 Volts. CE and Rohs. The white wire is ground and the grey wire is 8 to 13.8 Volts. Long life up to 30,000 hours.

LED Light, Spotlight, Fog Light, Day light Headlight Wire Kit

Product Code: 46859

LED Spotlight, Daylight Headlight Wire Kit. Use this kit to install your L.E.D. headlights, spotlights, daylights in your car. Low voltage automotive, motorcycle, jet ski or snowmobile. Comes with 16 feet of 18 AWG stranded wire, inline fuse with 10 amp fuse, 2 quick connect connectors to attach to positive 12 Volt D.C. and ground wires. This kit is enough parts to provide 100 watts of power for one LED light circuit.

9 Watt LED Driving 10-30 Volt DC 3 by 3 Watt Spot Pair

Product Code: 58647

9 Watt Driving, Off Road, Work light Pair. 3, 3 Watt high power led's per light, 9 watt led per light comparable to a 70 watt incandescent bulb. spot light (30 degree viewing angle). 3.21 inches around and 2 inches wide. Sturdy metal design. Comes with metal mounting brackets. Comes in white 6000K. 10-30 Volt D.C. IP 67. Available only in 6000 K.

3 5050 SMD LED Module 12VDC NCNR

Product Code: 58976

3 5050 SMD LEDs module. Input: 12VDC. Very Low Profile for narrow openings. Great for stair cases and interior automobile decorative lighting. Output 0.070A @ 12VDC. Approx.: 60 lumen output. 2.94" X 0.44" X 0.13" Available in white only. NCNR

3 3528 SMD Waterproof LED Module 12VDC Dimmable NCNR

Product Code: 69369

3 3528 SMD LEDs Water resistant module. Input: 12VDC. Great for stair cases and interior automobile decorative lighting. Comes with an adhesive backing and 2 mounting holes. Output 0.036A @ 12VDC. Up to 27 lumen output per module. 1.94" X 0.44" X 0.19" Available in white only. These lights led's are created for long life up to 30,000 hours. The viewing angle is 120 degrees. Comparable to a 4 to 9 Watt incandescent. There are 20 in a string but the modules will be sold 1 or more depending on how many you order. This item is a Non Cancelable, Non Returnable NCNR item. Each module has mounting holes .121" in diameter and spaced approximately 1.75" apart. Dimmable range from about 7.90 Volts to 13.8 Volts. Please connect ground to the white wire and plus 8-13.8 Volts to the gray wire. You can connect power to the wires that are on either side of the module.

Module 3 LED 5630 0.72 Watt 12 Volt DC IP65 NCNR

Product Code: 95464

Uses only .72W@12, Puts out up to 75 lumens. IP65, Long life up to 50,000 hours, solid state, no broken NEON tube. No buzzing power supplies that Neon signs need, instant on/off.

Page 51

Other

Flood Outdoor LED 10 Watt MCOB 12V AC/DC

Product Code: 32434

Outdoor LED Light Bulb 10 Watt MCOB 12V AC/DC. Great for wall washing, billboard lighting. For 12V AC/DC ONLY. Viewing angle is 90 degrees. One 10 Watt high power LED. 900 Lumen output. This LED is designed with a mounting stand, mounting holes and clips, and a durable, clear lens. This product measures approximately 4.36 inches by 3.26 inches by 3.50 inches. Blue wire is positive, Brown is Negative, and Yellow/Green wire is Ground (not needed). White 6000 Kelvin

2 3528 SMD Waterproof LED Module 12 VDC NCNRNW

Product Code: 68976

2 3528 SMD LED Waterproof module. Input: 12VDC. Very small and compact for getting lighting in those tight & hard to reach spaces. Comes with and adhesive backing for easy mounting. 0.023A @ 12VDC. Approx.: 20 lumen output. 1" X 0.31" X 0.19" Available in white only. Comes with wires on both sides of the module. You just have to connect 12 V to either side of the module and will light. If you have more than 1 module the will be connected together so you only have to connect power to either end of the modules. Modules come 20 to a string. This product is a Non-cancelable, Non-Returnable, No Warranty.

T6.5 Wedge 1 LED Round Top 12 Volt

Product Code: 78474

T6-1/2 wedge L.E.D. bulb. Operates at 12V DC, long life up to 30,000 hours, low current. Up to 7 Lumens output. Great for dashboards, instrument panels and other uses. Available in warm white 3000K and white 6000K. The White 6000K is brighter than the Warm White 3000K by about 5%. 120 degree viewing angle. Comparable to a 1 to 4 Watt incandescent bulb. CE and Rohs certified. The bulb is dim-able with a variable voltage supply. Works good to convert halogen to led in instrument panels. This T6.5 led bulb works great for classic and vintage automotive such as cars, trucks and motorcycles that are negative ground. This bulb is polarity sensitive. Uses about .1 Watt @ 12 Volts. This lamp uses about 10 mA @ 12 Volts. Compatible with: Triumph motorcycles 3.0W Clear Halogen T2500090 T6 5 T6.5 T6-5 T6-1/2 T6 1/2 T6.5 12 V 3

3 Watt LED Indicator Panel Mount 12VDC Dimmable

Product Code: 95456

LED Panel mounted indicator. Low voltage 12V, long life, up to 30,000 hours. Low heat only uses 3 watts a comparable light bulb would be 25 watts. Also known as walleye light or a cat eye light. The panel led light is self ballasted so it operates off 12 volts dc with no resistor. LED bulbs use very little current so a load equalization may be required depending on use. 180 degree viewing angle. Up to 300 Lumen output. Rated for up to 30,000 hours. CE and Rohs listed. LED are vibration resistant and last a long time compared a incandescent light bulb. Available colors are White 6000K, Red, Blue, Yellow and Green. This panel led bulb is comparable to a 15 to 25 watt incandescent bulb. Please connect the red wire to positive 12 volts DC and connect the black wire to ground then the panel bulb will illuminate. The LED panel mount indicators are dimmable from 7.50 Volts to 13.8 Volts.

Tap Light LED Round Portable Battery Operated

Product Code: 14221

The LED Tap Light is round, portable and battery operated. The light is turned on by pushing the lens, then the light is turned off by pushing the lens again, push on, push off. Uses 3 AAA batteries not included. The LED color is White 6000K. The body is made of white ABS plastic. Can be used in the bedroom, kitchen, bar, party room, closet or hallway. Up to 50,000 hour life span. The width is 4.33". The height is 1.96". Up to 20 Lumen output. Up to 0.3 Watt LED. Has mounting holes on the back to it can be mounted on a wall or under a shelf. CE, Rohs and EMC. One product per package.

AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree

Product Code: 48778

AR111 12 Watt LED Light Bulb. Low voltage, very nice design. Two prong base quick disconnects. Available in white 6000K. 12 Volt AC/DC. This led measures 4.34 inches by 2.41 inches. IP Class: 20. Weight: 0.26KG/pcs. CE and RoHS listed. Luminous Efficacy:40-50LM/W. Lumen maintenance: 480/600Lm. Beam angle: 25/60 Degrees. Forward Lumen: 600Lm. Side Lumen: 600 Lm. LED Watts: 2 W. Unit Watts: 12 W. CRI: 75.

LED Puck 10W Module 12 VDC Dimmable

Product Code: 85695

LED Puck 10W great for displays, art exhibits, spot light illumination. 12 Volt DC. Low heat, long life. Available in white 6000K only. Light is always on when power applied. Up to 850 lumen output. Dimmable with a variable voltage supply. 120 Degree viewing angle. The wire length is approximately 7.5" with the connector. The wire itself is 6.5" long. Comparable to a 80 Watt incandescent bulb. Approximately 20 AWG wire that is inside a sheathing. The hole to hole spacing is approximately 1.9". The mounting hole diameter is approximately 0.131". CE and Rohs.

Page 52

Other

4 3528 SMD Iron Shell Waterproof LED Module 12VDC 180 Beam NCNR

Product Code: 32569

4 3528 SMD LEDs Waterproof Iron Shell module. Input: 12VDC. 180 degree viewing angle. Great for stair cases and interior automobile decorative lighting. Comes with 2 side mounting holes and 1 center mounting hole. Output 0.048A @ 12VDC. Approx.: 70 lumen output. Available in White 6000K. 1.31" X 1.75" X 0.38" Available in white only. NCNR

Rebaydo 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch

Product Code: 57544

Rebaydo 1pc 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch features 10 super bright LEDs in a durable aluminum housing with plastic end caps for rugged use. Designed for flush surface mounting, the light bar can rotate to adjust lighting direction and includes an integrated on/off switch for easy operation. Includes 4 mounting screws for installation. Operates on 12 Volt DC systems with low current draw of approximately 0.06 Amps at 12.8V. Suitable for railings, steps, boats, limousines, RV interiors, under cabinet lighting, and general accent applications. Approximate dimensions are 9.0" length x 1.25" width x 1.37" height. Dimmable with a variable DC power supply such as a vehicle dimmer switch.

1 LED Motion Sensor Lamp

Product Code: 57878

Rebaydo 1pc LED Motion Sensor Lamp automatically turns on and off based on detected motion and features ON, AUTO, and OFF switch positions for flexible operation. ON mode keeps the light illuminated continuously, AUTO mode activates the light only when motion is detected in dark conditions, and OFF mode shuts the light off completely. When in AUTO mode, the light stays illuminated for approx. 30 seconds after motion stops before turning off automatically. Designed with a rear mounting hole for convenient hanging and installation. Requires 3 AA batteries not included. CE and RoHS listed for dependable indoor lighting applications.

9V Battery Connector Harness Female with Red and Black Wires

Product Code: 48565

9V Battery Connector Harness. Use this high quality connector that has battery snaps to properly connect a 9 volt transistor battery. Use this 9 volt plug to connect low power led lights. Approximate overall length is 6.5 inches. Perfect when you need a compact 9V snap connector in your project. This 9 Volt battery connector works great for hobbies such as doll houses, model railroad, radio control cars and boats. This battery clip works excellent for a class science projects.

Page 53

Power Supplies

Power Supply 60 Watt 12VDC Water proof 96-264VAC

Product Code: 36254

Meanwell power supply, long life, CE, RU listed, 96-264VAC, IP67. This product is meant for reliable long life for led and other power supply needs. Measures 6.35" in length, 1.63" in width, and 1.28" in height. Wires are approximately 2 feet in length.

200 Watt Power Supply 12V DC Input 88-132VAC

Product Code: 76334

200W/12VDC Mean Well power supply. RU, CE Listed, long life Mean Well quality. Input 88-132V AC. Great for LED lighting and other projects requiring the best and reliable 12V low volrage power.

Rebaydo Converter 6 Volt to 12 Volt 4 Amp

Product Code: 65848

Rebaydo Converter 6 Volt to 12 Volt 4 Amp step up converter. Converts your 6 Volt vehicle to be able to power 12 Volt accessories. Powers anything that is 4 Amps @ 12 Volt. The ballast has enough power in a small size. The input is 8 Amps @ 6 Volt input and the output is 4 amps @ 12 Volt. Works on both 6 Volt negative ground and 6 Volt positive ground cars, trucks, tractors and motorcycles. Long warranty please set page details for further warranty information. Easy to connect for (DIY) do it yourself retrofit. The ballast is water proof and is a non-isolated design. Please connect the ground and input 6 volt signal to the input side of the ballast the red and black wires. Please connect the output to a 12 Volt device using the yellow and black wires. With this ballast you can have DVD, Bluetooth, WIFI, USB port in your vintage and classic vehicles designed and built before World War II.

Power Supply 12 VDC 24 Watt 2 Amp 100 to 240 VAC

Product Code: 65987

Power Supply 12 VDC 24 Watt 2 Amp 100 to 240 VAC. This inexpensive 12 volt 24 Watt 100 to 240 VAC. UL grade switching power supply adapter is useful for any application requiring UL CE ROHS or Energy Star 12 VDC at up to 2.0 amps. This transformer is recommended for the use of the LED tube lights # 34563. Each LED Tube Light needs 1 power adapter to operate. It is for 6", 12", 24" and 48" led tube lights. The power cord length is up to 4 feet. With the dimensions 3.82 in tall x 1.75 in wide x 1.37 in thick. The power adapter is perfect for smaller locations. Double Insulated. Some advantages of the LED light power transformer is, It has an efficiency of 85%, depending on input voltage, and output power, It is inexpensive, fully regulated power supply. Provides inexpensive switch-mode AC switching power supply AC/ DC converter.

Rebaydo Power Supply 12 VDC 50 Watt Output Voltage 85-265 VAC Input

Product Code: 44397

Rebaydo 2pcs LED Light Power Supply 12V DC 50 Watt provides reliable 50 watt output at 12V DC with a wide 85-265V AC input range and 4.2 amp output current. This power supply features adjustable voltage from 12 to 12.8VDC using a built-in adjustment knob and measures 6.2 inches long, 2.38 inches wide, and 1.50 inches thick. Designed for constant current performance, it is ideal for powering LED tube lights, flexible LED strip lighting, and other 12V DC LED lighting applications. CE listed for quality assurance and suitable for a wide range of LED lighting setups requiring stable and efficient power delivery.

Water Proof 12 Volt DC LED Light Power Supply 10 Watts

Product Code: 46756

Water Proof LED Light Power Supply 10 Watts. Constant voltage of 12 Volts D.C. IP67 protection. .83 amps output current. Very small and easy to hide for your led lights. Approximate size is 6.4in x 1.20in x .81in, with 7inches of wire on each side. Input voltage 90-130VAC, input current 0.16A.

100 Watt Power Supply 12V

Product Code: 73345

100 Watt Power Supply 12V. Made by Mean Well for quality. 100 Watt, 12 Volt D.C., Input 88-132 VAC. Power supply has screw terminals/terhttps://www.ledlight.com/ssl/management/manageproducts.aspxminal strip to attach the wires.

Page 54

Power Supplies

100W Waterproof Power Supply 12 VDC 100-240 VAC

Product Code: 96796

100W Waterproof Power Supply. Mean Well power supply. IP67, RU, CE listed, wide input voltage range 96-264VAC, long warranty. Water proof, great for landscape and other rugged reliable 12V DC power is needed. Input voltage 100-240 VAC @ 2.2 Amps. Output voltage 12 Volts @ 8.5 Amps. 50/60 Hertz. Approximate size: 7.5" Long, 2" Wide, 1.4" Height. Compatible with: Mean Well LPV-100-12

Rebaydo Power Supply 150 Watt Water Proof 170-250 VAC

Product Code: 32896

This Rebaydo 150W waterproof 12V DC LED power supply is designed for low voltage 12V DC lighting applications where moisture or water exposure may be present. It is suitable for outdoor lighting, landscape lighting, signage, and other LED lighting systems that require a regulated 12V DC power source. The power supply provides regulated 12V DC output with a total capacity of approximately 150 watts and a maximum output current of approximately 12.5 amps. The unit includes four output leads that allow multiple lighting circuits to be connected. Each connection can support up to approximately 60 watts, but the combined total load must not exceed approximately 150 watts.

Power Supply 35 Watt 12VDC IP67 96-264VAC Waterproof

Product Code: 64574

Meanwell power supply, CE, RU Listed, IP67, 96-264VAC. Meanwell power supplies last forever. 1 Year Warranty, with IP67 can operate under water, great for LED and other power supply projects.

Power Supply 350 Watt 12V DC Input 88-132VAC

Product Code: 23566

350 Watt Mean Well power Supply, 12VDC output, 88-132vac input, CE,RU listed. reliable long life Mean Well power supplies great for LED and 12V power supply needs that are critical needs.

Rebaydo Power Supply 5 VDC 75 Watt

Product Code: 84756

Rebaydo 1pc LED Light Power Supply 5 VDC 75 Watt is a compact constant voltage switching power supply designed for LED lighting and electronic applications, delivering stable 5V DC output with up to 75W power and an output current range of 0–15A. It supports dual input voltage operation with user-selectable 120VAC or 220VAC and operates within a frequency range of 50–60Hz, providing reliable and efficient performance with adjustable output voltage (±2%), low ripple noise, and stable load and inlet regulation. Built with protection features including short circuit, overload, and over-voltage protection with automatic recovery, it also includes soft-start functionality to reduce input surge and EMI filtering for stable operation.

24 Volt DC Power Supply 50 Watt

Product Code: 45836

24 Volt D.C. LED Power Supply. 50 Watt power output. Multiple power input 100-120VAC or 200-240VAC (user's choice). CE and Rohs listed. Very small profile. This product measures 159mm x 97mm x 38mm or approximately 6.26 inches by 3.82 inches by 1.50 inches.

Power Supply 12 Volt DC 50 Watt 85-265 VAC Input

Product Code: 97423

85 -265 VAC input wide voltage, 12 Volt DC output, 50 Watt, Mean well quality. Withstand 300 VAC surge input for 5 second. No load power consumption < 0.2 watt. Miniature size and 1U low profile. High operating temperature up to -30C to 70 C. Short circuit, overload and over voltage protection. Cooled by free air convection. Compliance to IEC/EN 60351-1(PD3) IEC/EN61558-1, -2 -16 for household appliances. Operating altitude up to 5000 meters. Withstand 5G vibration test. High efficiency, long life and high reliability. LED indicator for power on. 100% full load burn-in test. Long warranty. Made by MEAN WELL. Approximate size 3.62" L x 3.22" W by 1.1" thick. Overload and over current protection. 47-63Hz operating. Safety standards UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1 2 16 approved. Withstand voltage I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC. MTBF 645K hrs min. MIL-HDBK-217F (25).

Page 55

Spot/Flood Lighting

Off Road, Work 48 Watt 9-30VDC IP67 Square

Product Code: 45864

Current draw 1.8A @ 12V. 0.9A@24V LED Work Light 16 x 3 Watt Super Bright LEDs. Wide voltage range 9-30V DC. White 6000 Kelvin. 3155 Lumen output, very bright. Water Proof IP67 rating. Pmma plastic lens. Estimated 30,000 hour life. Diecast aluminum housing. Comes with angled mounting bracket and mounting bolts. Could be used for driving lights, four wheel roll bar LED lights, great for security for cabin, boat or house. 4 3/8" x 4 3/8 x 3". Other applications Cabin/Boat/SUV/Truck/Car/ATVs work truck, tow truck, fire truck, ambulances, police, fishing Deck or fishing dock. Extended warranty, please see product page for warranty information. Comparable to a 350 Watt incandescent light bulb. Since the led light is solid state you do not have to worry about a broken filament or glass. Easy for D.I.Y. installations.

PAR38 Ultra Bright LED 12 VAC E26 NCNRNW 30 Degree

Product Code: 79567

IP Class: 54. Weight: 390G. CE and RoHS listed. Luminous Efficacy: 80lm/w. Lumen maintenance: 80-90%. Forward Lumen: 480-500Lm. LED Watts: 0.06 W. Unit Watts: 6W. CRI: 70. Comparable to an 60 Watt Incandescent floodlight. Available in white 6000 Kelvin. Long life of up to 60,000 hours. 30 Degree viewing angle. PAR38 Ultra Bright LED Light with 108 LED's.E27 screw in base. Operating voltage 12V AC or 12V DC. 4.84 inches diameter x 5.56 inches height. PAR38 Ultra Bright LED Light series with super bright T5 LEDs. For indoor and outdoor use. Clear lens. Glass assembly. This LED Light has a dimmability of 0 to 60 percent. Perfect for outdoor LED flood lighting, security LED Lighting, party LED Lighting, decorative LED Lighting, plant grow lights, greenhouses, landscaping and other indoor and outdoor uses. One per package.

LED Off Road Light 60 Watt 10-30VDC 60 Watt 30 Deg Black IP67 Round

Product Code: 67834

60 Watt LED Light. Great for driving, running, fog, work, boat, snowmobile, motorcycle lighting. 30 Degree viewing, wide voltage 10-30VDC. White 6000K. Includes stainless steel mounting bracket. Current draw 1.8A @ 12V. 0.9A@24V. Black Enclosure. Up to a 480 watt incandescent equivalent. 1). Cree chip for led work light, high quality. Great for fishing, camping, off road, sight seeing. 2). Easy installation, plug & play. 3). Low heat generation. 4). High brightness low power consumption. 5).

Rebaydo PAR38 10 Watt 12 Volt AC/DC E27 Diffused 120 View Dim-able NCNRNW

Product Code: 77540

Par38, diffused Lens. E26 or E27 medium screw base. 12 Volt AC or DC, low voltage. 10 Watt. White 6000 kelvin, Warm White 3000K. Approximately 1000 Lumen output. 120 degree viewing angle. Comparable to a 75 watt incandescent light bulb. IP65 rated. CRI>80. CE and Rohs listed. The LED bulb has E26 / E27 base which is the same base. Rated life up to 30,000 hours. This bulb is dim-able by varying the voltage supply. The White 6000K is about 5% brighter than the Warm White 3000K. NCNRNW means Non cancelable, No warranty, Not returnable. The reason for NCNRNW it is a 12 Volt product and will be destroyed is screwed into a 120 VAC socket. Great for applications around water such as boat dock lighting, landscape lighting.

Rebaydo PAR38 6 Watt LED Bulb Diffused 12 Volt AC/DC 30 Degree NCNRNW

Product Code: 45897

Rebaydo 2pcs PAR38 6 Watt LED Bulb Diffused 12 Volt AC/DC 30 Degree NCNRNW features a diffused glass lens with 108 super bright T5 LEDs and operates on 12V AC or 12V DC power. Produces 480-500 lumens with 80 lm/w luminous efficacy, CRI 70, 6000 Kelvin white light output, and a 30 degree viewing angle. Comparable to a 60 watt incandescent floodlight with lumen maintenance of 80-90 percent and dimmability from 0 to 60 percent. PAR38 Ultra Bright LED Light series designed for indoor and outdoor use with IP Class 54 protection. Features E26/E27 screw base, weighs 390 grams, and measures 4.84 inches diameter x 5.56 inches height. Long life up to 60,000 hours. Ideal for outdoor LED flood lighting, security LED lighting, party LED lighting, decorative LED lighting, plant grow lights, greenhouses, landscaping, and other indoor and outdoor applications. CE and RoHS listed. One per package.

Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC

Product Code: 73853

Up to 300 Lumen output. Greater than a 25 Watt incandescent light equivalent. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. Hard wiring required. Operating voltage 12V AC or 12VDC. The wire is 2' long. The wire is 18 AWG. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for RVs, boats or where quick LED Lighting is needed. One per package. Comes with 3 wires, Brown wire= Positive (Hot), Blue wire= Negative, and Yellow wire= Ground. CE and Rohs.

Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW

Product Code: 87756

280 Lumen output. Comparable to a 30-35 Watt incandescent. 3.6 Watt power consumption. 300 mA current consumption. Available in white 6000-7000 Kelvin or warm white 2800-3300 Kelvin. Long life of 50,000 hours. 30 Degree viewing angle. E27 screw in base. Operating voltage 12 Volt A.C. or 12 Volt D.C. only, not for 120 VAC. 1.95 inches diameter x 2.91 inches height. No ultraviolet UVA, UVB or radio frequency RF energy. Can be dimmed with a variable AC or DC voltage supply. One per package. 30 degree viewing angle. Dim-able with a variable voltage supply. This bulb is dim-able with a variable voltage supply. CE and Rohs.

Page 56

Spot/Flood Lighting

Accent Light 3 Watt Low Voltage

Product Code: 43232

150 Lumen output. 45 Watt incandescent Equivalent. 3 Watt power consumption. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. The range of motion is 360 degrees swivel and +15 degree/-70 degree angle. Operating voltage 12V AC or 12V DC. The wire is 19.5" long. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for task or accent Lighting. One per package.

LED Off Road, Driving Work Light 27 Watt 10-30VDC IP67 30 Deg Round

Product Code: 45182

Use this 27 Watt LED Work Light Low Voltage 10-30V DC IP67 30 Degree for outdoor. IP67 rating, has mounting bracket. White 6500K, upto 1755 lumens. 1.7A@13V,.9A@24V. Diecast aluminum housing. Up to 30000. Very easy to install in most applications. Just drill hole, mount light, hook up electrical wiring to low voltage power source 10V to 30V DC. Has 9 3 watt high power LEDs. Black diecast aluminum housing. Great for off the grid indoor or outdoor lighting. Very long life and durable to be used for off road LED lighting and would also work as driving lights, day time runiing lights. Comes with angled mounting bracket and rugged mounting bolts & nuts. Very nice work light and very nice light to use a headlight for a golf cart or off road vehicle sand rail, dune buggy, jeep or truck, great for back up lights. This light is round in shape.

Rebaydo PAR38 10 Watt 12 Volt AC or DC E27 Diffused 120 View Dim-able NCNRNW

Product Code: 69732

Rebaydo PAR38 10 Watt 12 Volt AC or DC E27 Diffused 120 View Dim-able NCNRN. 12 Volt AC or DC only. Dimmable with a variable voltage supply. Comparable to a 75 Watt incandescent bulb. Only available in White 6000K. This bulb is a NCNRNW which means Non cancelable, No warranty, Not returnable. If you screw this bulb into 120 VAC it will destroy this product. The base is E26/E27. Great for applications around water such a boat dock, landscape lighting. Length approx. 5 inches. Diameter approx. 4.83 inches.

G4 3 Watt 64 LED 12V AC/DC Dimmable

Product Code: 34155

G4 3 Watt 64 3014 SMD LEDs. 360 degree illumination. Long life up to 30,000 hours, up to 250 lumen, Low voltage 6-12 volts AC or DC. CRI>70. up to 75 lm/watt. Made of injection clear GEL. 25 to 30 watt incandescent equivalent. Dimmable with a varying power supply. Uses approximately 250 mA. See product detail for warranty period. This led bulb is dimmable by a variable voltage supply. Dimming range starts about 9 Volts to 12 Volts.

PAR 36 5 Watt 12 Volt AC or DC Diffused Screw Terminal G53

Product Code: 48677

PAR36 LED Light Bulb 126 LEDs 10-30 Volt AC/DC. PAR 36 LED Light has Screw Terminal G53 to connect power. Low power low voltage 10-30 Volt ac/dc. Available in white only 6000 K. Great for landscape lighting. CE and RoHS listed. Luminous Efficacy: 80 lm/w. Lumen maintenance: 80-90%. Forward Lumen: 500 Lm. Unit Watts: 5 W. CRI: 75. IP65 Weather Proof. 100% dimmable with a variable DC power supply. Replacement for H12V35. Made of glass. Comparable to a 50 Watt incandescent light bulb. The glass is diffused. 4.5" diameter.

MR11 6 SMD LED Low Voltage 12 Volt AC DC Dimmable

Product Code: 73426

LED MR11 up to 70 Lumen output. 1 Watt LED. Comparable to a 10 to 15W Halogen. IP54 class. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life up to 50,000 hours. 120 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This LED measures approximately 1.37 inches by 1.36 inches. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Up to 90 Lumen output. Dimmable from 8.40 Volts to 13.8 Volts. CE and Rohs.

17" LED Light Bar 100W

Product Code: 23432

100 Watt LED Light Bar 10-30V DC IP67 10 * 10W LEDs. Up to 8600 Lumen output. Use this light bar as a work light, driving light, off road light. 1 Foot 5 Inches long and 3.28 Inches wide. Since it is 100 LED watts the comparable incandescent wattage is 100 watt super bright leds. Available in white 6000k only. Made with CREE LEDs for long life. Comparable to a 900 halogen light bulb.

Page 57

Spot/Flood Lighting

E27 PAR 16 Three One Watt Super Bright LED Light Bulb

Product Code: 31218

E27 PAR16 Three One Watt Super Bright LED Light Bulb. 30 degree viewing angle. Very bright, 2nd generation LED Light. Has three 1 Watt LEDs. Up to 250 Lumens, Equivalent to a 25 watt incandescent equivalent. Available in day light white. 85-265 VAC. This bulb measures approximately 3.20 inches by 1.90 inches.

18 Watt LED Driving Light, Work, Bike 9-32V DC 60 Beam

Product Code: 36242

18 Watt LED Driving Light, Work Light, Bike Light 9-32V DC 60 Degree Viewing. Great light for motorcycles, bicycles, cars. Available in white 6000K only. Very compact and powerful 18 watts of LED Lighting. Comparable to a 140 watt incandescent light. Puts out approximately 900 lumens. Measures 6.11" long, 1.81" tall and 2.21" deep. Water proof, made for use on a vehicle.

9 Watt LED Driving 10-30 Volt DC 3 by 3 Watt Spot Pair

Product Code: 58647

9 Watt Driving, Off Road, Work light Pair. 3, 3 Watt high power led's per light, 9 watt led per light comparable to a 70 watt incandescent bulb. spot light (30 degree viewing angle). 3.21 inches around and 2 inches wide. Sturdy metal design. Comes with metal mounting brackets. Comes in white 6000K. 10-30 Volt D.C. IP 67. Available only in 6000 K.

MR11 12 SMD (3 Chip) 12 Volt AC/DC GX4.0 Base

Product Code: 73534

MR11 12 SMT (3 Chip) 12 Volt AC/DC. This low voltage mr11 led light is low power, long life. This bulb has 12 SMT leds. Uses only 2.5 watts of electricity. Available in white 6000K and warm white 3000K. Comparable to approx. a 20-30 watt incandescent light bulb. This product measures approximately 1.38 inches by 1.36 inches by 0.61 inches.

MR11 9 SMD LED LIGHT Low Voltage 12 Volt AC/DC

Product Code: 95743

MR11 9 5050 (3 Chip) S.M.T. LED LIGHT Low Voltage 12 Volt AC/DC. 144 Lumen output. Comparable to a 15-20 watt halogen equivalent and has a 120 degree viewing angle. uses only 1.8 Watts. Available in White 6000K or Warm White 3000K. This LED measures from top to bottom 1.40in and a diameter of 1.35in. Comparable to a 10 to 15 Watt incandescent light bulb. Super long life up to 30,000 hours.

Flood Outdoor LED 10 Watt MCOB 12V AC/DC

Product Code: 32434

Outdoor LED Light Bulb 10 Watt MCOB 12V AC/DC. Great for wall washing, billboard lighting. For 12V AC/DC ONLY. Viewing angle is 90 degrees. One 10 Watt high power LED. 900 Lumen output. This LED is designed with a mounting stand, mounting holes and clips, and a durable, clear lens. This product measures approximately 4.36 inches by 3.26 inches by 3.50 inches. Blue wire is positive, Brown is Negative, and Yellow/Green wire is Ground (not needed). White 6000 Kelvin

E12 LED 2 Watt AC/DC 12 Volt Dimmable NCNRNW

Product Code: 75461

E12, DC 12 Volt low voltage. Up to 1850 lumen output, Comparable to a 15 watt incandescent. 360 illumination. Lifespan up to 30,000 hours. Made of crystal clear GEL injection. Available in white 6000K and warm white 3000K. Dim-able with a variable voltage supply. Approximate size 1.88" long. 0.59" diameter. NCNRNW this bulb can easily screw into a 120 volt socket and blow up the led bulb.

Page 58

Spot/Flood Lighting

G4/GY6.35/JC 9 SMD 5050 (3 Chip) 360 LED Lighting 12V GX4.0 Base

Product Code: 47659

G4/JC 9 SMD 5050 (3 Chip) 360 LED Lighting. Use this G4 with 1 5050 forward firing and 8 side firing 5050 LEDs. Only uses .09mA @ 13.8 AC/DC.This product looks very nice in G4, MR11 and MR16 fixtures. Available in white and warm white. Approximate size is 1.32in x .42in. Uses 1.8 Watts, comparable to a 10 to 15 Watt Halogen light bulb.

AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree

Product Code: 48778

AR111 12 Watt LED Light Bulb. Low voltage, very nice design. Two prong base quick disconnects. Available in white 6000K. 12 Volt AC/DC. This led measures 4.34 inches by 2.41 inches. IP Class: 20. Weight: 0.26KG/pcs. CE and RoHS listed. Luminous Efficacy:40-50LM/W. Lumen maintenance: 480/600Lm. Beam angle: 25/60 Degrees. Forward Lumen: 600Lm. Side Lumen: 600 Lm. LED Watts: 2 W. Unit Watts: 12 W. CRI: 75.

LED Puck 10W Module 12 VDC Dimmable

Product Code: 85695

LED Puck 10W great for displays, art exhibits, spot light illumination. 12 Volt DC. Low heat, long life. Available in white 6000K only. Light is always on when power applied. Up to 850 lumen output. Dimmable with a variable voltage supply. 120 Degree viewing angle. The wire length is approximately 7.5" with the connector. The wire itself is 6.5" long. Comparable to a 80 Watt incandescent bulb. Approximately 20 AWG wire that is inside a sheathing. The hole to hole spacing is approximately 1.9". The mounting hole diameter is approximately 0.131". CE and Rohs.

BA15D 3 Watt LED Light 12V AC-DC

Product Code: 44232

180 Lumen output. Comparable to a 25-35 Watt Incandescent. 3 Watt power consumption. 300 mA current consumption. Available in white 6000-7000 Kelvin or warm white 2800-3300 Kelvin. Long life of 50,000 hours. 30 Degree viewing angle. BA15D base. Operating voltage 12V AC or 12V DC. 1.96 inches diameter x 2.91 inches height. Crystal glass lens. Three 1 Watt LED Light 12V AC/DC. CE approved. Replaces 12V 32 degree BA15d in elevators equipment. Great for RV's. Used in elevators. Replaces bulb # 1383.

Rebaydo 50 Watt LED Flood Light 12V to 24V AC

Product Code: 69897

Rebaydo 50 Watt LED Flood Light 12V AC is designed for approx. 12V AC systems using direct input leads, producing up to approx. 5000 lumens with approx. 100 Sanan 2835 SMD LED chips for consistent brightness and long life. Features approx. 120 degree viewing angle, approx. 6000K white color temperature, and power consumption of approx. 50 watts, not dimmable, with a rated lifespan up to approx. 30000 hours. Constructed with an aluminum body for improved heat dissipation and toughened glass for break resistance, with approx. 0.5 meter cable and operating temperature range approx. -30°C to approx. 60°C, power factor approx. 0.95 and CRI greater than approx. 80. Dimensions are approx. 9.5 inches length × approx. 8.25 inches width × approx. 2.25 inches depth, with approx. 18 inches center-to-center mounting hole spacing, approx. 1.61 inches cable length, and approx. 0.5 inches wire hole between mounting holes.

Rebaydo PAR 56 LED Light 12 Watt 12 Volt DC Screw Terminal G53 NCNRNW

Product Code: 79642

Rebaydo 1pc PAR 56 LED Light 12 Watt 12 Volt DC Screw Terminal G53 with 800-900 lumen output and 30 degree beam angle. Designed for indoor lighting applications, this non-dimmable PAR56 spotlight operates on 12 VDC and uses only 12 Watts while providing light output comparable to a 90 watt incandescent bulb. Features diffused lens construction, Screw Terminal G53 connection, IP54 rating, CRI 70, 252 LEDs, 0.06W LED power, luminous efficacy of 80lm/w, lumen maintenance of 80-90%, approximate size of 7 in x 4 in, and weight of 615G. PAR56 designation equals approximately 7 inches in diameter. Long life up to 30,000 hours. CE and RoHS listed. This product is sold as non-cancelable/non-returnable. Please verify specifications and application requirements before purchase.

Rebaydo 20 Watt LED Flood Light 12 to 24 Volt AC

Product Code: 68412

Rebaydo 20 Watt LED Flood Light 12-24V AC is designed for approx. 12-24V AC systems using direct input leads, producing up to approx. 1600 lumens with approx. 40 Sanan 2835 LED chips for long life and consistent performance. Features approx. 120 degree viewing angle, approx. 6000K white color temperature, and power consumption of approx. 20 watts comparable to approx. 180 watt incandescent bulbs, with a rated lifespan up to approx. 30000 hours and not dimmable. Built with an aluminum body and toughened glass for impact resistance, with approx. 0.5 meter rubber cable and operating temperature range approx. -30°C to approx. 60°C, power factor approx. 0.95 and CRI = approx. 80. Dimensions are approx. 7 inches length × approx. 6.25 inches width × approx. 2 inches depth, with approx. 18 inches cable length, approx. 1.75 inches hole-to-hole mounting space, and approx.

Page 59

Track Lighting

G4 GY6.35 JC 18 SMD 3528 LED Lamp 12V DC G4 Base

Product Code: 34635

G4 18 SMD 3528 LED Lamp. has 18 3528 SMT LEDs. The design allows for LED Light emitting forward firing. Uses only 1.2 watts, comparable to a 10 to 15 Watt halogen bulb. 12 Volt DC. This LED measures approximately 1.46 inches by 1.17 inches. Up to 130 Lumen output. Dimmable with a variable voltage supply. 120 degree viewing angle. Long life up to 30,000 hours. CE and Rohs.

G4 GY6.35 6 SMD RGB Color Changing 12V AC or DC

Product Code: 34754

G4/GY6.35 6 SMT RGB Color Changing LED Light Bulb Low Voltage AC/DC 12 Volts. G4 will cycle through colors red, green and blue and combination of all 3 by itself. 140 Lumen output. Cycle time approximate 7 seconds, each color 2 seconds. This LED measures from top to bottom 1.62in, with a width of .39in and a diameter of 1.17in.

G4 GY6.35 JC Super Flux 4 12 Volt AC-DC

Product Code: 43243

40 Lumen output. 10W Halogen equivalent. 1.5 Watts power consumption. 120 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 60 Degree viewing angle. GX4.0 base. Operating voltage 12V AC 12V DC. This LED measures approximately 1.31 inches by 0.99 inches by 0.56 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. G4/JC/GY6.35

G4 G6.25 JC 1.8 Watt 360 Degree 12 Volt AC-DC Dimmable

Product Code: 45616

G4 1.8 Watt 360 Degree illumination. Operates 12V AC-DC. 24 SMD 3014 LEDs. G4 base. Small size fits in g4 socket better. long life up to 30,000 hours. Perfect for smaller areas that need illumination. Up to 180 Lumens output. Available in White (6000K) and Warm White (3000K). This G4 LED bulb uses approximately 1.8 Watts @ 12 Volt AC/DC. The diameter can vary from 0.34" to 0.4375". Dimmable range from 7.71 Volts to 9.5 Volts. The led's are completely encapsulated so they resist damage from the weather. Comparable to a 18 to 20 Watt incandescent bulb. CE and Rohs.

G4 G6.25 JC 2 Watt MCOB 12V AC-DC

Product Code: 68744

G4 2 Watt, L.E.D. M.C.O.B. technology, 360 degree illumination, CRI>80, Lumens up to 210. Weigth 3 grams. Works on both AC and DC. Dimmable with a variable AC-DC power supply. Long life up to 30,000 hours, available in white 6000K and warm white 3000k. PF 0.62, comparable to a 15-25 watt incandescent light bulb., Sdcm<6, very small diameter. Plastic lens and bottom with air holes in the top and bottom to allow air circulation.

G4 GY6.35 3.1 Watt DC10-30V AC10-18V Dimmable G4

Product Code: 34231

G4 GY6.35 21 SMD 2835 with aluminum body. Long life up to 30,000 hours. Approximate 185 lumens side firing and 255 Lumens forward firing. CRI>80. Uses .24 amps @ 13.8VDC. Approximately 25-30 watt incandescent equivalent. Dimmable with a varying power supply. Operates DC 10 to 30V and AC 10 to 18V. The g4 uses g4 or gx4.0 base. Metal body help led's last longer and brighter. Comparable to a 25-30 Watt incandescent bulb.

G4 GY6.35 2 Watt AC or DC 12V Dimmable G4

Product Code: 65748

G4 2.2 Watt High Power LED Light GX4.0 DC/AC 12V. 360 degree viewing angle. Up to 210 lumen output. Comparable to a 15-20 watt incandescent G4 bulb. CRI greater than 70. Measures 1.45 inches long and .45 inches wide. Works either 12 volt AC or DC. Availlable in white 6000-6500k and warm white 2800-3000K. Has 48 qauntity3014 smt led chips. Sealed with silicon material. GX4.0 base. 1/2" diameter and 1.45 inches long. Weighs 4.6 grams. The G4 bulb is dimmable with a variable dc power. The range is about 7.5 volts to 12 VDC.

Page 60

Track Lighting

G4 G6.25 JC 3 Watt 360 Degree 12 Volt AC-DC Dimable

Product Code: 84755

G4, 57 3014 SMD leds, uses only 3 watts, comparable to a 25-35 watt incandescent. Works with either 12 Volt AC or DC. CRI>70, up to 255 lumen output. With LEDs on top this bulb offers 360 degree illumination, G4 base type, long life up to 30,000 hours, power factor .7. Available in white 6000K and warm white 3000. Encased in silicone to protect LEDs and components from moisture. G4 bulb is dimable with a varying power supply, powering on at 7 volts and reaching full brightness at 10 volts.

G4 LED 2 Watt 120 VAC 360 Viewing

Product Code: 87944

G4 L.E.D. 2 Watt, 360 Degree illumination, 120 VAC, long life up to 30,000, CRI>80, Up to 180 lumen output, Power factor .336. CE and Rohs listed. Available in white 6000K and warm white 3000K.

G4 GY6.35 LED 1 Watt Dimmable Low Profile 12V AC-DC

Product Code: 67645

G4 L.E.D. Bulb. Low profile, looks like a G4 bulb, fit is most G4 fixtures, 360 Viewing angle, available in white 6000K and warm white 3000K. CE and Rohs listed. Low voltage 12 volts AC or DC. Long life up to 30,000 hours. Comparable to a 10 G4 incandescent. 0705 L.E.D., CRI>80, PF 0.62. Dimmable with a varying AC or DC power supply.

G4 GY6.35 1.4 Watt LED Bulb 12V DC

Product Code: 98447

G4 L.E.D. 14 SMD 3014. 1.4 Watt. 12 Volt DC, CRI>80, long life up to 30,000 hours, PF>.87, 360 degree illumination, available in warm white 3000K and white 6000K. For thin, low profile G4 applications.

G4 Ultra Bright 6 SMD 12 Volt AC/DC

Product Code: 35263

G4 52 Lumen output. Comparable to a 10 W Halogen equivalent. 1.1 Watt power consumption. 150 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 110 Degree viewing angle. GU4.0 base. Operating voltage 12V AC or 12V DC. This LED measures approximately 1.34 inches by 0.91 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Comparable to a 10 Watt incandescent bulb.

G4 GY6.35 24 5050 SMD LED 360 Degree 12 VDC

Product Code: 43685

G4 GY6.35 24 5050 SMD LEDs / 360 Degree G4 Low Voltage 12 Volts AC/DC. Each 5050 L.E.D. uses .5 Watt. GX4.0 Base. Available in white only. This product measures approximately 1.57 inches by 0.76 inches.

G4 GY6.35 JC 9 SMD 5050 3 Chip Forward Firing Low Voltage 12 V AC GX4.0

Product Code: 47654

G4 9 SMT 5050 3 Chip Forward Firing Low Voltage 12 V AC or 12V DC. Each 5050 smd has 3 led's. So this means that there are 36 led chips that light. This product allows the LED Light to be forward firing so you can place the G4 in the socket. This LED measures a diameter of 1.25in and .60in thick. Only consumes 3.3 watts of energy. Approx. 120 viewing angle. Up to 180 Lumen output. Comparable to a 20-25 watt bulb. Dim-ability this G4 is dimmable. Available in White 6000K and Warm White 3000K. Please make sure your power supply will power this low powered led lamps, if not please purchase a LED Light approved power supply. CE and Rohs.

Page 61

Track Lighting

Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC

Product Code: 73853

Up to 300 Lumen output. Greater than a 25 Watt incandescent light equivalent. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. Hard wiring required. Operating voltage 12V AC or 12VDC. The wire is 2' long. The wire is 18 AWG. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for RVs, boats or where quick LED Lighting is needed. One per package. Comes with 3 wires, Brown wire= Positive (Hot), Blue wire= Negative, and Yellow wire= Ground. CE and Rohs.

G4 GY6.35 JC 3 Watt Ceramic Shell 12V AC DC 360 Degree G4

Product Code: 74375

12 Volt ac or dc. MCOB 3 watt LED. Plastic lens for 360 degree illumination. Approximately 220 lumens. GX4.0 Base. 1.47 inches in length and .55 inches in width. Ceramic shell for long life and durability. Plastic lens. Dimmable with a varying power supply. Comparable to a 25 watt incandescent equivalent.

Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW

Product Code: 87756

280 Lumen output. Comparable to a 30-35 Watt incandescent. 3.6 Watt power consumption. 300 mA current consumption. Available in white 6000-7000 Kelvin or warm white 2800-3300 Kelvin. Long life of 50,000 hours. 30 Degree viewing angle. E27 screw in base. Operating voltage 12 Volt A.C. or 12 Volt D.C. only, not for 120 VAC. 1.95 inches diameter x 2.91 inches height. No ultraviolet UVA, UVB or radio frequency RF energy. Can be dimmed with a variable AC or DC voltage supply. One per package. 30 degree viewing angle. Dim-able with a variable voltage supply. This bulb is dim-able with a variable voltage supply. CE and Rohs.

Accent Light 3 Watt Low Voltage

Product Code: 43232

150 Lumen output. 45 Watt incandescent Equivalent. 3 Watt power consumption. 280 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 30 Degree viewing angle. The range of motion is 360 degrees swivel and +15 degree/-70 degree angle. Operating voltage 12V AC or 12V DC. The wire is 19.5" long. The size of the unit is 4" in height and 4" Wide. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. Great for task or accent Lighting. One per package.

G4 JC GY6.35 9 SMD 1.8 Watt 12 Volt DC

Product Code: 47569

G4/JC 9 SMT 5050 (3 Chip) LED Lamp. 12 Volt DC. GX4.0 Base. This G4 is very nice has both side firing and forward firing LEDs. Uses 1.8 Watts, comparable to a 10 to 15 Watt Halogen light bulb. This product measures approximately 1.21 inches by 0.41 inches. The warm white is a 1/8th of a inch taller. Viewing angle 360 degrees.

Ultra Bright G4 LED Bulb 9 SMD 12 Volt AC/DC Dim-able

Product Code: 85529

Ultra Bright G4 LED Bulb. Up to 240 Lumen output. This is a G4 bi pin. Spacing of the pins if 4mm. Comparable to a 25W Halogen bulb. Only uses 2 Watts of power consumption. 180 mA current consumption. Available in white 6000-6500 Kelvin or warm white 3000-3500 Kelvin. Long life of up to 30,000 hours. 120 Degree viewing angle. This G4 measures approximately 1.50 inches by 1.15 inches by 0.35 inches. Heat sink design to maximize LED life. No ultraviolet (UVA, UVB) or radio frequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Great for marine use or track lighting. Has thick heat sink to keep the leds cooler so they last longer. Saves 90% energy. This bulb is dim-able. CE and Rohs.

G4 GY6.35 1.85-Watt High Power LED 12V AC-DC

Product Code: 98884

G4 Round MCOB 1.85 Watt bulb, Up to 110 lumen output, long life up to 30,000 hours, 180 degree viewing angle, 12 volt AC or DC. CRI>75, The G4 pins are on the back side. Nice metal to cool the MCOB. Available in white 6000K and warm white 3000K. This G4 is also called foward firing, since the pins are on the back side.

Page 62

Track Lighting

MR11 1 Watt High Power L.E.D. Bulb 12 V AC/DC Miniature Bi-Pin G4 Base

Product Code: 27341

MR 11 1 Watt High Power L.E.D. Bulb. 12V AC/DC Low power uses only 1 watt comparable to a 10 watt halogen light bulb. Available in white, daylight white and warm white. This product measures approximately 2.06 inches by 1.36 inches by 0.69 inches. IP Class: 50. Weight: 0.05KG. CE and RoHS listed. Luminous Efficacy: 80%. Lumen maintenance: 100Lm. Beam angle: 30 Degrees. LED Watts: 1 W. Unit Watts: 1 W. CRI: 80Ra. This bulb is not dimmable. Miniature Bi-Pin Base that should fit most gx4.0 / gu4.0 base.

MR11 6 SMD LED Low Voltage 12 Volt AC DC Dimmable

Product Code: 73426

LED MR11 up to 70 Lumen output. 1 Watt LED. Comparable to a 10 to 15W Halogen. IP54 class. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life up to 50,000 hours. 120 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This LED measures approximately 1.37 inches by 1.36 inches. No ultraviolet (UVA, UVB, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. Up to 90 Lumen output. Dimmable from 8.40 Volts to 13.8 Volts. CE and Rohs.

G4 GY6.35 JC 16 (3 Chip) 5050 LED Bulb 12 Volt DC GX4.0 Base

Product Code: 48712

G4 GY6.35 16 (3 Chip) 5050 LED Light Bulb. 16 5050 SMT Chip for a very bright G4 LED Lighting. Uses 3.2 Watts of power comparable to 25 to 30 watt light bulb. Viewing angle 120 Degrees. 210 Lumen output. CR=65. GX4.0 Base.

E14 4 5050 S.M.D. LED Light Bulb 12V AC/DC NCNRNW

Product Code: 75845

E14 Low Profile LED Light Bulb. 48 lumen output. 4 to 10 watt incandescent equivalent. 12V AC/DC. Approximate size is 1.18in x .78in. Only uses .08 mA @ 13.8 VDC.

G4 JC GY6.35 LED Bulb 2 Watt Low Voltage GX4 BASE DC8-30VDC AC10-18V

Product Code: 12476

2 Watt, 2835 SMD, G4, JC/Gy6.35. Uses only 2 watts, but very bright using 2835 SMD chip. Wide voltage DC8-30V/AC10-18V. Dimmable. GX4.0 Base. UP to 140 Lumen output.

G4 GY6.35 JC 12V DC 360 Degree 5 SMD 5050

Product Code: 25623

65 Lumen output, uses only .8 watts, CRI>80. 12 Volt DC. Comparable to a 5-8 watt incandescent bulb. Low cost G4 LED Lights. Uses 5 5050 SMD, GX4.0 Socket. Uses only 0.8W@12VDC yet puts out 65 lumen output of light in 360 degrees. Long life, vibration resistant. Uses GX4.0 Base. Available in white 6000K and warm white 3000K. Measures .42" wide and 1.19". Dim-able with a variable DC power supply. 360 degree viewing angle.

E27 PAR 16 Three One Watt Super Bright LED Light Bulb

Product Code: 31218

E27 PAR16 Three One Watt Super Bright LED Light Bulb. 30 degree viewing angle. Very bright, 2nd generation LED Light. Has three 1 Watt LEDs. Up to 250 Lumens, Equivalent to a 25 watt incandescent equivalent. Available in day light white. 85-265 VAC. This bulb measures approximately 3.20 inches by 1.90 inches.

Page 63

Track Lighting

G4 GY6.25 JC 21 SMD 3528 LED Light Bulb 12V DC GX4.0 Base

Product Code: 34567

G4/JC 21 SMD 3528 LED Light Bulb. Low voltage 12 Volt D.C. Has 21 3528 SMT LED's. This LED Light only uses 1.2 Watts. Comparable to a 10 to 20 Watt Halogen Light bulb. Up to This LED measures approximately 1.40 inches by 1.33 inches with a 0.11 inch thickness. Up to 150 Lumen output. 120 degree viewing angle. Dimmable with a variable voltage source. Long life up to 30,000 hours. CE and Rohs.

G4 GY6.35 JC 360 Degree 18 SMD 5050 12 VDC

Product Code: 64523

G4 360 Degree 18 SMT 5050 3 Chip Low Voltage. Uses 250mA. Light output 270-280Lm. This LED comes equipped with 3 forward firing and 15 side firing LEDs for a higher brightness intensity. Low Voltage LED Light 12 Volt DC. This G4 measures approximately 1.78 inches by 0.57 inches by 0.72 inches.

3528 LED G4 Bulb 12V DC

Product Code: 68544

3528 led G4 bulb. GX4.0 Base. 12 V D.C. This light uses 1.5 Watts. Comparable output of 15 to 20 Watt Halogen bulb. This product measures approximately 1.33 inches by 0.46 inches. Similar shape of the original halogen lamp. Long life up to 30,000 hours. Dim-able using a variable voltage supply. Great for boats. Save energy by upgrading your old G4 with new led. Helps cool down the cabin room and save 90% energy use. Available in White 5500-6500K or Warm White 2500-3500K. There can be either 1 or 2 leds at the top of the G4 bulb. CE and Rohs.

MR11 12 SMD (3 Chip) 12 Volt AC/DC GX4.0 Base

Product Code: 73534

MR11 12 SMT (3 Chip) 12 Volt AC/DC. This low voltage mr11 led light is low power, long life. This bulb has 12 SMT leds. Uses only 2.5 watts of electricity. Available in white 6000K and warm white 3000K. Comparable to approx. a 20-30 watt incandescent light bulb. This product measures approximately 1.38 inches by 1.36 inches by 0.61 inches.

MR11 9 SMD LED LIGHT Low Voltage 12 Volt AC/DC

Product Code: 95743

MR11 9 5050 (3 Chip) S.M.T. LED LIGHT Low Voltage 12 Volt AC/DC. 144 Lumen output. Comparable to a 15-20 watt halogen equivalent and has a 120 degree viewing angle. uses only 1.8 Watts. Available in White 6000K or Warm White 3000K. This LED measures from top to bottom 1.40in and a diameter of 1.35in. Comparable to a 10 to 15 Watt incandescent light bulb. Super long life up to 30,000 hours.

G4 GY6.35 12 5050 SMD 3 Chip LED Dimmable

Product Code: 65487

JC G4 12 5050 (3 Chip) SMD LED Light 12 VDC Low Voltage Very bright G4 uses 12 SMT LEDs. 12-30 VDC. This LED measures from top to bottom 1.63in, with a width of .31in and a diameter of 1.21in. Available in white and warm white. 4 watts, equivalent to a 30 watt incandescent. Fully dimmable with a variable power supply.

G4 JC GY6.35 1.2 Watt 6 SMD LED 12V AC-DC

Product Code: 78744

G4 JC GX6.35 6 SMD 3 Chip LED 12V AC/DC GX4.0 Side Firing. Use this side firing ( Pins go out side . Low voltage 12V AC or DC. Long life up to 30000 hours. Low power consumption. Nice white plastic body. Up to 80 lumen output.

Page 64

Track Lighting

G4 GY6.35 JC Super Bright 21 LED 12 Volt AC DC G4

Product Code: 53894

40 Lumen output. Comparable to a 5W Halogen. 1 Watt power consumption. 90 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 30,000 hours. 50 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This G4 measures approximately 1.49 inches by 1.23 inches by 0.40 inches. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. GY6.35/JC/G4

G4 GY6.35 JC 3 SMD 5050 3 Chip LED 12V G4 Base

Product Code: 85964

JC-G4 3 SMT 5050 (3 Chip) LED Light Bulb. Low voltage 12V AC/DC. GX4.0 Base. 3 SMT 5050 LEDs with 3 chips for a total of 9 chips. Unit watts is 0.6W. Consumes 1.8 Watts, comparable light output 10 to 15 Watts Halogen. This product measures approximately 1.42 inches by 0.36 inches. Ce and Rohs listed.

G4 JC GY6.35 9 SMD Low Voltage 12 Volt DC Dimmable

Product Code: 87962

G4/GY6.35 9 SMT Low Voltage 12 Volt DC. Each SMT LED has 3 LED chips. The G4 base is GX4.0. The G4 LED can operate 12 Volts DC. Very long life. This LED measures approximately 1.40 inches by 1.18 inches with a 0.12 inch thickness. Dimmable with a variable voltage supply. Up to 150 Lumen output. Long life up to 30,000 hours. Comparable to a 10-20 Watt incandescent bulb. 120 degree viewing angle. CE and Rohs.

G4 GY6.35 JC 14 LED 12 Volt AC-DC

Product Code: 34534

30 Lumen output. Comparable to a 3W Halogen. 0.8 Watt power consumption. 70 mA current consumption. Available in white 6000 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 110 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. This G4 measures approximately 1.29 inches by 0.99 inches with a 0.43 inch thickness. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package.

G4 GY6.35 1.5-Watt High Power LED 12V AC-DC

Product Code: 45178

1.5 Watt G4 side firing LED Light. Gx4.0 base, 180 degree viewing angle. 12V AC or DC. Up to 80 lumen output. Available in white 6000-6500K and warm white 2800-3000K. Weighs 6 grams.

AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree

Product Code: 48778

AR111 12 Watt LED Light Bulb. Low voltage, very nice design. Two prong base quick disconnects. Available in white 6000K. 12 Volt AC/DC. This led measures 4.34 inches by 2.41 inches. IP Class: 20. Weight: 0.26KG/pcs. CE and RoHS listed. Luminous Efficacy:40-50LM/W. Lumen maintenance: 480/600Lm. Beam angle: 25/60 Degrees. Forward Lumen: 600Lm. Side Lumen: 600 Lm. LED Watts: 2 W. Unit Watts: 12 W. CRI: 75.

LED Puck 10W Module 12 VDC Dimmable

Product Code: 85695

LED Puck 10W great for displays, art exhibits, spot light illumination. 12 Volt DC. Low heat, long life. Available in white 6000K only. Light is always on when power applied. Up to 850 lumen output. Dimmable with a variable voltage supply. 120 Degree viewing angle. The wire length is approximately 7.5" with the connector. The wire itself is 6.5" long. Comparable to a 80 Watt incandescent bulb. Approximately 20 AWG wire that is inside a sheathing. The hole to hole spacing is approximately 1.9". The mounting hole diameter is approximately 0.131". CE and Rohs.

Page 65

Track Lighting

MR11 LED 2.5 Watt 10 to 30 Volts DC 120 Viewing

Product Code: 87467

MR11 2.5 Watt L.E.D. Bulb, Has 30 2835 SMD chips. 120 viewing degree, long life up to 30,000 hours, wide low voltage 10-30 VDC. GX5.3 Base. Available in warm white 3000K and white 6000K. This bulb is dim-able. CE and Rohs listed. Up to 250 Lumen output.

G4 GY6.35 JC Ultra Bright 1 Watt LED 12 Volt AC DC G4 Base

Product Code: 54334

80 Lumen output. Comparable to a 15W Halogen. 1.8 Watt power consumption. 110 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. Long life of 50,000 hours. 120 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. 1.10 inch diameter x 1.53 inch height. Heat sink design to maximize LED life. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package.

BA15D 3 Watt LED Light 12V AC-DC

Product Code: 44232

180 Lumen output. Comparable to a 25-35 Watt Incandescent. 3 Watt power consumption. 300 mA current consumption. Available in white 6000-7000 Kelvin or warm white 2800-3300 Kelvin. Long life of 50,000 hours. 30 Degree viewing angle. BA15D base. Operating voltage 12V AC or 12V DC. 1.96 inches diameter x 2.91 inches height. Crystal glass lens. Three 1 Watt LED Light 12V AC/DC. CE approved. Replaces 12V 32 degree BA15d in elevators equipment. Great for RV's. Used in elevators. Replaces bulb # 1383.

G4/JC/GY6.35 9 SMT (3 Chip) L.E.D. Side Firing LED Light 12VDC GX4.0

Product Code: 78643

G4/JC 9 SMT (3 Chip) L.E.D. Side Firing LED Light. 140 lumen output and only uses .13 mA @ 13.8 VDC. Comparable to a 25-30 watt halogen equivalent. This is a great product for JC or G4 replacement LED lamp. This LED measures from top to bottom 1.62in, .34in thick and a diameter of 1.16in. The operating voltage range is 12.8V AC or DC

G4 9 SMD 1201 LED Bulb 12V

Product Code: 45674

9 1201 SMT LED G4 JC GY6.35 LED Light Bulb Low Voltage. Very nice 9 SMD 1201 LED G4 Product. 12 VDC. This LED measures 1.29 inches by 1 inch. Available in white and warm white.

G4 GY6.35 JC 24 SMD Ultra Bright 12V Dimmable

Product Code: 18634

24 3528 SMD LEDs. Very Bright, up to 100 Lumen output. 12 Volts AC or DC. Uses only 0.08 Watts of energy and compares to a 20 to 30 Watt halogen bulb. This LED measures from top to bottom 1.52in and a diameter of 1.10in. GX4 base. JC and G4 are standard names for this product. Available in white and warm white. IP Class: 20. Ventilation: 85%. Weight: 12g. CE and RoHS listed. Luminous Efficacy: 52LM/W. Lumen maintenance: 75-100LM. Beam angle: 120 Degrees. Number of LEDs: 24PCS. LED Type: 3528 SMD. Unit Amps: 380mA. LED Watts: 0.2 W. Unit Watts: 1.9W. Forward Lumen: (DW) 100LM. (WW) 81.3LM. Kelvin: (DW) 559 K. (WW) 582 K. Dimmable with a dc voltage variable power supply.

G4 GY6.35 JC Super Flux 1 LED 12 Volt AC-DC G4 Base

Product Code: 72253

10 Lumen output. 1W Halogen equivalent. 0.2 Watt power consumption. 30 mA current consumption. Available in white 6500 Kelvin or warm white 3000 Kelvin. 50,000 hour life. 60 Degree viewing angle. GX4.0 base. Operating voltage 12V AC or 12V DC. 0.35 inch diameter x 0.70 inch height. No ultraviolet (UVA, UVB) or radiofrequency (RF) energy. Can be dimmed with a variable AC or DC voltage supply. One per package. GY6.35/JC/G4

Page 66

Tube Lighting

Rebaydo Tube Light 6" Led Low Voltage 12 Volt DC Plug & Switch

Product Code: 34563

70 Lumen output. Comparable to a 10 Watt fluorescent tube. Uses only 3 Watts. Available in green 500 nm-570 nm, blue 420 nm-470 nm, amber/yellow 570-600 nm and color changing RGB. RGB sequence cycles in 22 seconds. Available in 6" with 12 LED's. Long life up to 30,000 hours. Tube Diameter approximately 15/16 Inch. Operating voltage 12 V DC. Back side is flat. 12 inches of wire with molded connector. The tube is rigid. The use of our power transformer # 65987 is recommended. This transformer is designed for these tube lights and will help prevent premature LED burnout. Extremely durable, shock proof, vibration proof, Monochromatic (pure) color, low heat generation and, virtually unbreakable. Great for fluorescent tube replacement in the home or business also great for shelf accent lighting in the home, RV or at the office. On/Off switch included on the 12 inch LED tube lights.

Tube LED 12 Watt 12 Inch Switch & Plug 12 Volt DC 120 Degree

Product Code: 69283

Very bright 140 Lumen output. Comparable to a 20 Watt fluorescent tube light. Only 6 Watts power consumption. 430 mA current consumption. Available in white 6000 K, warm white 3000 K, red 630 nm-780 nm, green 500 nm-570 nm, blue 420 nm-470 nm, amber-yellow 570-600 nm and color changing RGB. The internal RGB controller sequence cycles in 22 seconds. Available with internal or externally controlled RGB controllers. Available in 6" with 12 LEDs, 12" with 24 LEDs, 24" with 48 LEDs, and 48" with 96 LEDs. Long life up to 60,000 hours. Tube Diameter approximately 15/16 Inch. Operating voltage 12 V DC. Back side is flat. 12, 24, 48, and 96 Super Flux LED Lights. The tube is rigid. The use of our power transformer # 65987 is recommended. This transformer is designed for these tube lights and will help prevent premature LED burnout.

T8 T12 4 Foot 18 Watt 12V to 36V AC DC G13 Power Both Ends NCNRNW

Product Code: 68459

4 Foot T8 with G13 end caps. The pin to pin spacing of the G13 end cap is 13mm. Up to 2160 Lumens output. Power is 12-36 Volts non polarized DC. Power is applied to G13 end caps at both ends. You have to bypass or remove the ballast and any voltage greater than 36 volts. Available color is Daylight White 4000K. The viewing angle is 120 degrees. The tube is not dim-able. The tube will provide maximum brightness anywhere in the voltage range of 12 to 36 Volts. The Maximum amperage is 1.88 Amps. The tube is made of 1/2 aluminum and 1/2 plastic lens. Lens available in clear or frosted. There are 120 pcs of 2825 SMD led chip for the best illumination possible. PF>90. The diameter is 26mm and the length is 1.2m or 4 foot. This bulb is comparable to a 160 Watt incandescent light bulb but only uses 18 watts. The rated life is up to 30,000 hours.

24 Inch L.E.D. Tube Switch & Plug 12 Volt DC

Product Code: 89456

280 Lumens output per foot. Comparable to a 20 Watt fluorescent tube light. Uses 12 Watts. 430 ma current consumption. Available in white 6000 K, warm white 3000 K, red 630 nm 780 nm, green 500 nm - 570 nm, blue 420 nm 470 nm, amber/yellow 570-600 nm and color changing RGB. RGB sequence cycles in 22 seconds. Available in 6" with 12 LEDs, 12" with 24 LEDs, 24" with 48 LEDs, and 48" with 96 LEDs. Long life. Tube Diameter approximately 15/16 Inch. Operating voltage 12 Volt DC. Back side is flat. 12, 24, 48, and 96 Super Flux LED Lights. The tube is rigid. The use of our power transformer # 65987 is recommended. This transformer is designed for these tube lights and will help prevent premature LED burnout. Extremely durable, shock proof, vibration proof, Monochromatic (pure) color, low heat generation and, virtually unbreakable.

48 Inch Tube 12 Volt DC Switch Plug

Product Code: 48769

Up to 500 Lumen output. 40 Watt fluorescent tube light equivalent. 24 Watts power consumption. 430 ma current consumption. Available in white 6000 K, warm white 3000 K, red 630 nm - 780 nm, green 500 nm-570 nm, blue 420 nm-470 nm, amber/yellow 570-600 nm and color changing RGB. RGB sequence cycles in 22 seconds. Available in 6" with 12 LEDs, 12" with 24 LEDs, 24" with 48 LEDs, and 48" with 96 LEDs. Long life of 60,000 hours. Tube Diameter approximately 15/16 Inch. Operating voltage 12V DC. Back side is flat. 12, 24, 48, and 96 Super Flux LED Lights. The tube is rigid. The use of our power transformer # 65987 is recommended. This transformer is designed for these tube lights and will help prevent premature LED burnout. Extremely durable, shock proof, vibration proof, Monochromatic (pure) color, low heat generation and, virtually unbreakable.

Tube T8 40 Watt 8 Foot 12-36 AC or DC G13 Power Both Ends NCNRNW

Product Code: 78448

T8 T12 L.E.D. tube, 8 foot, G13 rotatable end caps, low voltage 12-24 VDC, CE/FCC/Rohs, up to 4000 lumen output, only white 6000k, made of aluminum and PC materials. Uses 240 quantity 2835 smd chips, CRI >= 75. Power can be applied single end or both ends. Long life up to 30,000 hours. Please apply 12-24 DC power. This tube is Non Cancelable, Non Returnable, Non Warranty. The reason this tube is NCNRNW is because the tube can be installed in a fixture with a ballast and this will over voltage the tube. The tube is tested before being shipped.

T8 T12 3 Foot 13 Watt 12V to 36V AC DC G13 Power Both Ends NCNRNW

Product Code: 68732

T8 T12 3 Foot 13 Watt 12V to 36V AC DC G13 Power Both Ends. Up to 1560 Lumen output. Power is 12-36 Volts AC or DC. Power is applied to G13 at both ends. This wiring should be done in the fixture that accepts a standard T8 or T12 tube light. You have to bypass or remove the ballast. CE and Rohs certified. The viewing angle is 120 degrees. The tube is not dim-able. The led tube has a wide voltage to operate from 12 volts to 36 volts D.C. The tube is made of 1/2 aluminum and 1/2 plastic lens. Lens available in frosted or clear. Made with 2835 SMD led chips for the best illumination possible. PF>.90. CRI>80. The diameter is 26mm and the length is 0.90m or 3 foot. This bulb is comparable to a 104 Watt incandescent light bulb but only uses 13 watts. The rated life is up to 30,000 hours. The available color is Daylight White 4000K.

Page 67

Tube Lighting

T8 T12 2 Foot 10 Watt 12 to 36 Volt AC DC G13 Power Both Ends NCNRNW

Product Code: 58784

Up to 1100 Lumen output. 12-36 Volt AC or DC tube light. Uses G13 end caps that rotate. The color is Daylight White 4000K. The LED tube is made with 72 pcs of 2825 smd chip. The size is 26mm diameter and .6m, 2 ft. PFC >=90. Constructed with 1/2 aluminium and 1/2 frosted lens. The power is applied to both ends. Must be hooked up to each side of the G13 tombstones. The viewing angle is 120 degrees. This tube is the same diameter as a standard T8 tube light. Comparable to a 150 incandescent light bulb. The lighting pattern is back-lit. Made of AL+PC. 72 pcs 2835 SMD LED. Uses 10 Watts. The PE is >= 90. Lumen output 1100. Light efficacy 110 LM/W. RA >= 90. 120 degree beam angle. IP40 rated. Long life up to 30,000 hours or longer. The tube is CE and Rohs listed.

Rebaydo 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch

Product Code: 57544

Rebaydo 1pc 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch features 10 super bright LEDs in a durable aluminum housing with plastic end caps for rugged use. Designed for flush surface mounting, the light bar can rotate to adjust lighting direction and includes an integrated on/off switch for easy operation. Includes 4 mounting screws for installation. Operates on 12 Volt DC systems with low current draw of approximately 0.06 Amps at 12.8V. Suitable for railings, steps, boats, limousines, RV interiors, under cabinet lighting, and general accent applications. Approximate dimensions are 9.0" length x 1.25" width x 1.37" height. Dimmable with a variable DC power supply such as a vehicle dimmer switch.

T8 Tube 2 Foot 12-36V AC or DC G13 Power on One End NCNRNW

Product Code: 86478

Low voltage T8 Tube light. Can be powered by one end. Uses from 12V to 36V AC or DC. G13 end caps. The tube is available in daylight white 4000K. Uses only 10 Watts comparable to a 20 Watt fluorescent bulb. 120 degree viewing angle. End caps are rotatable. This product is a Non Cancelable, Non Returnable, Non Warranty. This is due to the tube could be installed in a fixture with a ballast and this would cause the tube to fail due to over voltage. Each tube is tested before being shipped.

Page 68

UV Ultra Violet

UVC Sterilizer For Cell Phone 260nm-280nm

Product Code: 68713

UVC sterilizer for Cell Phone 260nm-280nm. Compatible with Apple lightning port or Android Type-C USB Micro-B port. Great to get rid of MRSA, H1N1, COVID-19. Please make sure to keep the illuminated distance to around 1/8" for at least 5 seconds. You can reach 99.99% sterilizing rate the further the distance the longer time it will take. Great for baby bottles, baby nipples, toys, eating tools, tooth brushes, hotel rooms, cell phone, jewelry to prevent bacterial growth. Specifications, Micro Instant Sterilizer, Power: 0.4w, Output voltage: 5V, wavelength:260-280, Sterilization time: more than 5 seconds, 1-2 minutes is best, Input voltage: DC3.7V, Keep out of reach of children, do not shine in eyes, do not shine on skin for long time. Easy way to get rid of bacterial, viruses and super bugs just like the hospital sterilizes their rooms and tools.

Page 69

• 23461 - Rebaydo 2pcs LED Module 5 SMD 5050 12 VDC 1.2 Watt IP652
• 65895 - Flexible LED Light Strip 12 Volt DC 12" NCNR2
• 52342 - Rebaydo 2pcs LED Module 4 5050 LED 12 Volt DC2
• 26424 - LED Module High Power 0.72 Watt SMD2835 * 3 DC12V Beam 180 IP65 NCNR2
• 49587 - Flexible 12 Inch LED Low Voltage2
• 25451 - Flexible 5050 SMD Water Resistant 12V 24 Inch2
• 58448 - Module 4 5050 3 Chip SMD 2 Side Mount Holes NCNR2
• 67484 - Flexible Water Proof 24 Inch 1210 SMT 12 VDC Inter linkable3
• 58758 - Flexible LED 5050 SMD LED Water Resistant 12 Volt DC 12 Inches3
• 25456 - 5050 SMD Water Resistant Flexible 12 VDC 48 Inch3
• 42623 - Rebaydo 4pcs Connector 4 Conductor Black Flexible LED Light 3
• 56357 - Flexible LED Water Resistant 15 Foot 1 Reel 1210 SMT 12 Volt DC3
• 63459 - Flexible 24 Inch 1206 SMD 12 Volt DC3
• 47526 - Water Proof Flexible LED 1210 SMD 48 Inch 12 Volt DC 3
• 84578 - Flexible 48 Inch LED Light 1206 SMD Low Voltage 12 Volt DC4
• 12855 - Rebaydo Puck LED Under Cabinet Light 12VDC 3 Watt4
• 26435 - Module 3 LED 5630 SMD 12VDC 1.2 Watt IP674
• 26575 - Flexible Water Proof 1210 15 Foot 1 Reel 12 Volt DC4
• 34545 - Flexible 48 Inch RGB 1210 SMT LED Light Common Cathode Low Voltage4
• 67342 - Flexible 48 Inch Red/Green/Blue 1210 SMD LED Light Common Anode 12 VDC4
• 83345 - Flexible Side Firing LED Light 20 Inches / 12 Volt DC4
• 25645 - Flexible Digital Water Proof 1/2-Meter 36 Inches NCNR5
• 64584 - 5050 SMD LED Water Resistant Flexible Lighting 12VDC 1 Reel 15 Feet5
• 69348 - Flexible Side Firing LED 39 Inches5
• 89563 - Flexible 5050 SMD LED Water Proof 12V 24 Inch5
• 35987 - Waving Infrared Sensor Switch 12-24VDC 5.5mm Connectors5
• 45896 - LED Module 5 SMD Plastic Waterproof 12 Volt DC NCNR5
• 58976 - 3 5050 SMD LED Module 12VDC NCNR5
• 68497 - Rebaydo Flat LED RGB Flexible Rope Light Common Anode 12 Volt DC NCNRNW6
• 69369 - 3 3528 SMD Waterproof LED Module 12VDC Dimmable NCNR6
• 89902 - LED Rope Light 1/2" Diameter 12 VDC Per Foot NCNRNW6
• 95464 - Module 3 LED 5630 0.72 Watt 12 Volt DC IP65 NCNR6
• 38476 - Flexible 5050 SMT LED RGB Light 18 Inches / .5 Meter 12 Volt DC 6
• 83474 - Flexible Side Firing 15 Feet 5 Meter 12 Volt DC6
• 23511 - Module Injected 5630 SMD 3 LED 12VDC 0.72 Watt IP67 Water Proof NCNR6
• 68976 - 2 3528 SMD Waterproof LED Module 12 VDC NCNRNW7
• 86484 - Flexible 3538 120 LED/m 9.6W/m 12VDC 120 Beam 5 Meter IP547
• 98781 - 5050 LED Module Water Proof RGB Common Cathode NCNR7
• 76854 - Rebaydo 2pcs 5050 LED Module Water Resistant RGB Common Anode 12 VDC NCNRNW7
• 67564 - 5050 SMT LED Water Proof Flexible Lighting 12V Interlinkable 48 Inch 7
• 84674 - Module 1 5050 LED 12 VDC Dimmable 120 Viewing7
• 34533 - Flexible Water Proof 12 Inch 1210 SMD 12 VDC7
• 23466 - Flexible LED Kelvin Changing 1 Meter 24 Volt DC8
• 32651 - Module 3 LED 5050 Mounting Holes 12VDC IP65 .72 Watt8
• 34623 - 5050 SMD LED Water Proof Flexible Lighting 12 VDC 15 Feet 1 Reel8
• 67544 - Module LED Rectangular Water Proof 3 Super Flux 12V DC Dim-able8
• 94567 - Flexible 24 Inch Red/Green/Blue SMT 1210 LED Light Common Anode8
• 32569 - 4 3528 SMD Iron Shell Waterproof LED Module 12VDC 180 Beam NCNR8
• 47653 - 5050 SMT LED Water Proof Flexible Low Voltage 12V Interlink 12 Inch8
• 78453 - Flexible 12 Inch Red-Green-Blue 1210 SMT LED Light Common Anode9
• 46574 - Flexible LED 12 Inch Red Green Blue 1210 SMD Common Cathode9
• 85365 - Electronic Digital Flexible Water Proof LED Light 5 VDC 5 Meter NCNR9
• 97865 - Water Proof Module Round RGB Common Anode 12 Volt AC/DC NCNR9
• 84953 - Water Proof Module Rectangular RGB Common Anode 12 Volt AC/DC NCNR9
• 56879 - Flexible 5050 SMD 39 Inches9
• 93456 - Flexible 24 Inch Red/Green/Blue LED Light Common Cathode Low Voltage9
• 67546 - Round LED Rope Lighting End Terminator NCNRNW10
• 42755 - Flat Rope LED Light Terminator NCNRNW10

• 34635 - G4 GY6.35 JC 18 SMD 3528 LED Lamp 12V DC G4 Base11
• 34754 - G4 GY6.35 6 SMD RGB Color Changing 12V AC or DC11
• 43243 - G4 GY6.35 JC Super Flux 4 12 Volt AC-DC11
• 45616 - G4 G6.25 JC 1.8 Watt 360 Degree 12 Volt AC-DC Dimmable11
• 68744 - G4 G6.25 JC 2 Watt MCOB 12V AC-DC11
• 34231 - G4 GY6.35 3.1 Watt DC10-30V AC10-18V Dimmable G411
• 65748 - G4 GY6.35 2 Watt AC or DC 12V Dimmable G411
• 84755 - G4 G6.25 JC 3 Watt 360 Degree 12 Volt AC-DC Dimable12
• 87944 - G4 LED 2 Watt 120 VAC 360 Viewing12
• 67645 - G4 GY6.35 LED 1 Watt Dimmable Low Profile 12V AC-DC12
• 98447 - G4 GY6.35 1.4 Watt LED Bulb 12V DC12
• 35263 - G4 Ultra Bright 6 SMD 12 Volt AC/DC12
• 47654 - G4 GY6.35 JC 9 SMD 5050 3 Chip Forward Firing Low Voltage 12 V AC GX4.012
• 74375 - G4 GY6.35 JC 3 Watt Ceramic Shell 12V AC DC 360 Degree G412
• 34155 - G4 3 Watt 64 LED 12V AC/DC Dimmable13
• 47569 - G4 JC GY6.35 9 SMD 1.8 Watt 12 Volt DC13
• 85529 - Ultra Bright G4 LED Bulb 9 SMD 12 Volt AC/DC Dim-able13
• 98884 - G4 GY6.35 1.85-Watt High Power LED 12V AC-DC 13
• 48712 - G4 GY6.35 JC 16 (3 Chip) 5050 LED Bulb 12 Volt DC GX4.0 Base13
• 12476 - G4 JC GY6.35 LED Bulb 2 Watt Low Voltage GX4 BASE DC8-30VDC AC10-18V13
• 25623 - G4 GY6.35 JC 12V DC 360 Degree 5 SMD 505013
• 34567 - G4 GY6.25 JC 21 SMD 3528 LED Light Bulb 12V DC GX4.0 Base14
• 64523 - G4 GY6.35 JC 360 Degree 18 SMD 5050 12 VDC14
• 68544 - 3528 LED G4 Bulb 12V DC14
• 65487 - G4 GY6.35 12 5050 SMD 3 Chip LED Dimmable14
• 78744 - G4 JC GY6.35 1.2 Watt 6 SMD LED 12V AC-DC14
• 47659 - G4/GY6.35/JC 9 SMD 5050 (3 Chip) 360 LED Lighting 12V GX4.0 Base14
• 53894 - G4 GY6.35 JC Super Bright 21 LED 12 Volt AC DC G414
• 87962 - G4 JC GY6.35 9 SMD Low Voltage 12 Volt DC Dimmable15
• 34534 - G4 GY6.35 JC 14 LED 12 Volt AC-DC15
• 45178 - G4 GY6.35 1.5-Watt High Power LED 12V AC-DC15
• 54334 - G4 GY6.35 JC Ultra Bright 1 Watt LED 12 Volt AC DC G4 Base15
• 78643 - G4/JC/GY6.35 9 SMT (3 Chip) L.E.D. Side Firing LED Light 12VDC GX4.015
• 45674 - G4 9 SMD 1201 LED Bulb 12V15
• 18634 - G4 GY6.35 JC 24 SMD Ultra Bright 12V Dimmable15
• 72253 - G4 GY6.35 JC Super Flux 1 LED 12 Volt AC-DC G4 Base16

• 32161 - LED Bulb 12 Watt 12 Volt E27 NCNRNW17
• 24614 - LED Bulb 9 Watt 12 Volt AC/DC E27 NCNRNW17
• 79567 - PAR38 Ultra Bright LED 12 VAC E26 NCNRNW 30 Degree17
• 79845 - Bulb LED 15 Watt 12 Volt Dimmable NCNRNW17
• 77540 - Rebaydo PAR38 10 Watt 12 Volt AC/DC E27 Diffused 120 View Dim-able NCNRNW17
• 79477 - Par 36 9 Watt 10-30 Volt Diffused Lens Screw Terminal G5317
• 87756 - Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW17
• 43535 - Recessed LED Fixture 12 VDC18
• 48677 - PAR 36 5 Watt 12 Volt AC or DC Diffused Screw Terminal G5318
• 75461 - E12 LED 2 Watt AC/DC 12 Volt Dimmable NCNRNW18
• 24577 - Midget Screw Round 6 12 24 VDC T 1-3/4 Dim-able 90 Degree E518
• 58643 - E14 LED Bulb 12 Volt AC-DC 18 SMD NCNRNW18
• 79564 - Rebaydo 2pcs E10 Miniature Screw Concave LED Bulb 12 Volt DC18
• 32324 - Rebaydo 2pcs LED Flashlight Bulb Pr2 P13.5S 3W 5-24V DC18
• 34432 - Rebaydo 2pcs LED Flashlight Bulb P13.5S 3W 6-24V Non Polarized19
• 85695 - LED Puck 10W Module 12 VDC Dimmable19
• 45795 - Standard 12 Volt Ultra Bright 7 SMD LED AC DC E27 NCNRNW19
• 25335 - Rebaydo 2pcs LED Flashlight Bulb Pr2 P13.5S 3W 3-6V19
• 34523 - E12 Low Profile 12 LED Low Voltage 12V AC/DC LED Lamp NCNRNW19
• 67234 - E10 male 9 LED Low Profile 12 Volt AC or DC NCNRNW19

• 68765 - Waterproof Crystal Harness 2 Conductor20
• 68799 - Connector 12 mm 5 Conductor 4 Way Solder Less PCB20
• 78485 - GU10 Male to 18AWG 15cm wires Converter20
• 79848 - GU24 to Wire 15cm Harness20
• 87794 - E26/E27 Male to E12 Female Converter Adapter20
• 42623 - Rebaydo 4pcs Connector 4 Conductor Black Flexible LED Light 20
• 32454 - Waterproof Harness For LED Water Proof Flexible Strips20
• 35673 - Y Cable Harness21
• 74415 - Rebaydo 2pcs Connector female 5.5mm x 2.5mm 21
• 74898 - H11 H8 880 881 female Adapter to Pigtail Wires21
• 12787 - Connector male 5.5mm x 2.5mm21
• 21311 - Harness, Waterproof, 4 Pins (RGB) male & female set White21
• 21542 - Harness 3 Way Splitter 5mm Black 1 Female input 3 male Output21
• 23659 - Rebaydo 2pcs H11 female to H10 male Socket Converter/Extension21
• 23624 - Rebaydo 2pcs T5 T8 Tube Light 2 Conductor female To 2 Conductor female22
• 34589 - 3-Way LED Light Harness Cable 12VDC White22
• 47678 - Rebaydo 2pcs Flat LED Rope Light RGB Power Harness NCNRNW22
• 67849 - Connector 8mm Female 2 Conductor Solder Less22
• 68494 - Interlinkable 8 mm 2 Conductor To 5 mm Female Power Plug22
• 74578 - Connector male 5.5mm x 2.1mm Water Resistant22
• 84984 - Interlinkable 8 mm 2 Conductor Solder Less To Wires22
• 94362 - Female 5.5mm x 2.1mm DC Water Resistant Connector23
• 94568 - T5 Tube Light Inter Connect Cable23
• 15634 - Interlink-able 10mm 2 Conductor To 10mm 2 Conductor23
• 16532 - Connector 12 mm female 2 Conductor Solder Less23
• 46890 - Single Color Female LED Light Harness23
• 84573 - Fuse Holder 6mm x 30mm FH42 with Pigtail wires23
• 94844 - Rebaydo 2pcs Connector 12 mm 5 Conductor 3 Way Solder Less PCB23
• 14516 - Connector 10mm female 2 Conductor Solder Less24
• 67452 - Rebaydo 2pcs LED Light Tube Custom Harness Male24
• 94350 - Rebaydo 2pcs Power Supply LED Light Custom Harness24
• 26145 - Connector L Shape, RGB Color, White, Solderless24
• 68774 - Harness Waterproof 5 Pin IP66 AWG20 Black 40cm24
• 73573 - 3 color Interconnect Cable Harness 5 Foot male to male24
• 74345 - Rebaydo 2pcs Harness 1 Color Interconnect Cable male to male24
• 12778 - Interlink-able 12 mm 2 Conductor To Round female 5 mm Connector25
• 21124 - Connector, 4 Way, 4 Conductor RGB Color, White 25
• 32412 - Rebaydo 2pcs LED Light Protector25
• 84348 - Rebaydo 2pcs AC Power Cord 3 Terminal Female for T5 or T8 Tube White25
• 12114 - Connector, 3 Way, RGB Color, White25
• 12477 - Harness, Splitter 2 Way, Black, 5mm 2 male and 1 female 5mm25
• 12748 - Harness, 4 Way, RGB Color, White25
• 21211 - Harness, Waterproof, 2 Pins, male & female set, White26
• 21241 - Interlink-able 12 mm 4 Conductor to Wires26
• 21371 - Connector 12 mm female 4 Conductor Solder Less26
• 21510 - Interlink-able 12 mm 2 Conductor To 12 mm 2 Conductor26
• 23142 - Harness, Waterproof, 3 Pins (CCT), male & female set White26
• 32614 - Harness, Single Color, Wire one end26
• 47803 - Rebaydo 2pcs Multi Color Female LED Light Harness26
• 64888 - Connector 10mm 4 Conductor 3 Way Solder Less PCB27
• 65475 - Mini Blade Weather Resistant Fuse Holder with Wires27
• 71545 - AC Power Cord 3 Stranded wires for T5 or T8 Tubes White27
• 74511 - Harness with 5.5mm Connector27
• 74844 - Interlink-able 10mm 2 Conductor To Round female Plug 5mm27
• 76577 - Connector Male 5.5mmx2.1mm to Screw Terminals27
• 78442 - Rebaydo 2pcs R7S Female 254mm Socket with Wires27
• 78487 - Interlink-able 10mm 4 Conductor Solder Less To 4 Conductor28
• 87497 - Interlinkable 12 mm 6 Conductor To 12 mm 6 Conductor Pack of 528
• 87964 - Rebaydo 2pcs Single Color Flexible LED Light Harness28
• 87966 - Connector 10mm 2 Conductor 3 Way Solder Less PCB 28
• 89763 - Rebaydo 2pcs Multi Color Flexible LED Light Harness28
• 94877 - Interlink-able 10mm 4 Conductor To 10mm 4 Conductor28
• 12454 - Interlink-able 12 mm 4 Conductor To 12 mm 4 Conductor28
• 21312 - Harness, 4 Pin, RGB Color, Wires, White29
• 21421 - Wire, RGB Color, 4 Wires, 20 Awg, Stranded, 6 Inches29
• 21624 - Interlink-able 10mm 4 Conductor Solder Less To Wires29
• 14512 - Connector, Round DC 5mm, Black, Male & Female Set29
• 21422 - Harness, 4 Way Splitter, 5mm female Input, 4 5mm male, Black29
• 21784 - Interlink-able 12 mm 2 Conductor To Wires29
• 24615 - Connector 4 Conductor White29
• 98477 - Wire, Red & Black, 20 AWG, Stranded, 6 Inches30
• 33287 - Rebaydo 5-Way LED Light Harness Cable 12VDC White30
• 67283 - Harness Dual Channel Wire Kit 12 VDC30
• 87488 - Interlink-able 8mm 2 Conductor To 8mm 2 Conductor30
• 42624 - Rebaydo 2pcs Linking Connector for Tube lights Same Hole Size 30
• 85469 - Flexible Ribbon RGB Harness 5 Foot male to male Common Cathode30
• 65856 - Connector Interlinkable 3 Conductor Female Ground Hole Larger30
• 84593 - Connector 10mm 5 Conductor 2 Way Solder Less PCB31
• 87674 - Connector 10mm 5 Conductor 3 Way Solder Less PCB 31
• 89689 - Rebaydo 2pcs H11 female to Wires Harness Converter31
• 68448 - Rebaydo 2pcs G53 female Ceramic Socket with Pigtail Wires 31
• 78644 - Rebaydo 2pcs E26/E27 Female Socket Towel Style31
• 86576 - R7S female 118mm socket with wires31
• 86866 - Rebaydo 2pcs R7S female 189mm socket with wires31
• 87549 - Connector 10mm 4 Conductor 4 Way Solder Less PCB32
• 45764 - Cable T5 Tube Light Interlinkable 3 Conductor Black 43 Inches32
• 59687 - Connector 12 mm 4 Conductor 3 Way Solder Less PCB32
• 65859 - Wire Connector 3 Hole 3 Pack32
• 67846 - H11 male to H16 female Waterproof Harness Converter32
• 67886 - Rebaydo 2pcs H11 female to P13W male Waterproof Harness Converter32
• 68458 - Wire Connector 4 Hole 2 Pack32
• 68475 - Connector 12 mm 4 Conductor 4 Way Solder Less PCB 33
• 69847 - Rebaydo 4pcs Connector T-type 1 to 1 Wire Solder Less Crimp33
• 69867 - H11 male to H1 female Waterproof Harness33
• 69898 - Connector 10mm 5 Conductor 4 Way Solder Less PCB33
• 74746 - GU10 male to GU10 female Extension 15cm 18awg wire33
• 74785 - Connector 12 mm 4 Conductor 2 Way Solder Less PCB33
• 76584 - 9006 male to H11 female Waterproof Harness Converter33
• 76965 - E26-E27 male to E17 female Converter34
• 78423 - Interlink-able 12 mm 6 Conductor Solder Less to wires34
• 78978 - Connector 10mm 4 Way 2 Conductor Solder Less PCB34
• 79456 - Rebaydo 4pcs Wire Connector Solderless 1 to 1 Wire 18awg to 22awg 34
• 79474 - Rebaydo 2pcs GX53 Holder Socket with wires34
• 79484 - Connector 2 to 2 Wire Pack of 334
• 79684 - Connector 8mm 2 Conductor 3 Way Solder Less PCB 34
• 83455 - Rebaydo 2pcs Interlink-able 12 mm 5 Conductor Solder Less to Wires 35
• 84474 - Connector 8mm 2 Conductor 2 Way Solder Less PCB35
• 86743 - Rebaydo 2pcs H10 female to H11 male Waterproof Harness Converter35
• 86756 - 1/2" Round Rope 90 Degree Fitting35
• 87465 - Connector 10mm 2 Conductor 4 Way Solder Less PCB35
• 87565 - Connector 12 mm female 6 Conductor Solder less35
• 87676 - Harness 4 Way One Female to Four Male Connectors 5mm35
• 87677 - Connector 4 Conductor 2 Way Injected36
• 87699 - Connector 10mm 2 Conductor 2 Way Solder Less PCB36
• 87835 - Connector 10mm 4 Conductor 2 Way Solder Less PCB 36
• 87988 - Rebaydo 2pcs E26/E27 Male Socket with Wires36
• 89458 - Wire-nut wire connectors36
• 89476 - Connector 12 mm 2 Conductor 2 Way Solder Less PCB 36
• 89764 - Connector 12 mm 2 Conductor 4 Way Solder Less PCB 36
• 90987 - Interlink-able 10mm 5 Conductor To 10mm 5 Conductor37
• 94769 - Connector 10mm female 4 Conductor Solder Less37
• 95677 - Rebaydo 3pcs Connector T-type 2 to 2 Wire Solder Less Crimp 37
• 96877 - Connector 12 mm 5 Conductor 2 Way Solder Less PCB37
• 97664 - Rebaydo 2pcs Interlink-able 12 mm 5 Conductor To 12 mm 5 Conductor37
• 97822 - Rebaydo 2pcs Interlink-able 10mm 5 Conductor Solder Less To Wires37
• 97849 - Connector 8mm 2 Conductor 4 Way Solder Less PCB 37
• 98744 - Connector 12 mm 2 Conductor 3 Way Solder Less PCB38
• 98756 - Wire Connector Solderless 2 Hole 12 awg to 18 awg 5 Pack38
• 26154 - Interlink-able 10mm 2 Conductor Solder Less To Wires38
• 68965 - Rebaydo 2pcs Cable T5 Tube Light 3 Conductor White 39 Inches38
• 74377 - Female Connector 5.5mm x 2.1mm to Screw Terminals38
• 45746 - Rebaydo 2pcs H1 Socket with Wire38
• 67841 - Connector, male and female Set, Crystal DC Plug 5mm38
• 67238 - LED Light Bar Work Light Wiring Kit Single Channel Low Voltage 12 Volt39
• 89759 - Rebaydo Switch with 5.5mm/2.1mm Round Female and Male Plug39
• 34423 - Multi Color Female to Male LED Light Harness39
• 78244 - USB male to 5.5mmx2.1mm male Connector39
• 78695 - Rebaydo 4pcs Scotch Lock Quick Connector39
• 56483 - Connecting Wire/Harness39
• 76853 - 1/2" Round LED Rope Light T Connector NCNRNW39
• 48565 - 9V Battery Connector Harness Female with Red and Black Wires40

• 33213 - DMX 512 Address Editor NCNRNW41
• 29463 - Rebaydo Dimmer Low Voltage One Channel 8A 12-24VDC 41
• 32443 - Rebaydo Controller 12 Volt 360 Watt 10 Amp 3 Channel Common Anode41
• 35987 - Waving Infrared Sensor Switch 12-24VDC 5.5mm Connectors41
• 54643 - LED Touch Controller RGB RF 12-24V 6A 216W 3 Channel 41
• 19548 - Rebaydo LED Touch Dimmer & Power Switch 12-24VDC 5.5mm Female and 5.5mm Male Connectors41
• 22572 - Rebaydo Dimmer DC Terminal 12-24VDC One Channel 24W41
• 34531 - Rebaydo Radio Control RGB LED Light Controller 12 Volt 144 Watt Common Anode42
• 54324 - Repeater Amplifier 3 Channel 12 Volt DC Common Anode42
• 42363 - Controller Led 3 Channel Common Anode 12V DC 42
• 58736 - RGB DMX Controller 12V DC 300W Master/Slave Synchronization42
• 65846 - LED Mini Controller 1 Channel/Color DC12V 6A 72W42
• 35675 - Rebaydo Controller 12 VDC Common Anode42
• 21945 - Infrared Sensor Switch 12-24VDC 5mm Connector42
• 52312 - Rebaydo Water Resistant Controller 3 Channel Common Anode43
• 58498 - Rebaydo 2pcs LED Mini RGB LED Controller Common Anode 12VDC 6A 72W 3 Channel43
• 63424 - Rebaydo Dimmer Touch 12 Volt Low Voltage 96W 1 Channel 8A43
• 84654 - Touch Controller 1 Color RF 12V 6A 72W43
• 45876 - Rebaydo 2pcs RGB LED Strip Light Amplifier Repeater 12V 9 Amp 102 W 3 Channel43
• 85457 - Rebaydo Amplifier 12V 144W 3 Channel 4 Amp Common Anode43
• 89435 - Rebaydo LED Dimmer Controller with Remote43
• 75864 - LED DMX512 Controller 6Ax3 Channel 216 Watt 12-24VDC Common Anode44
• 64843 - Rebaydo Dimmer 12VDC 96 Watt 8 Amp Channel44
• 68754 - RGB Controller Low Voltage Common Anode 12 Volt DC 72 Watt 44
• 73532 - RF LED Flexible strip controller 5 Volt DC44
• 88759 - DMX512 Decoder 12VDC Output 8A x 3 Channel44
• 45845 - RGB Flat Rope Controller 12 VDC Common Anode44
• 43522 - DMX Controller for Digital Tube NCNR44
• 52532 - Rebaydo RGB Dimmer 12VDC/108W 3 Channel 3A Common Anode45
• 97886 - DMX 512 Controller Desktop45
• 77859 - Rebaydo Controller DMX512 12 Volt 6 Amp 3 Channel Common Anode45
• 56432 - Controller RGB Controller Common Anode45

• 95223 - Rebaydo 2pcs MR16 GU5.3 Base Three 1 Watt LED 12 Volt AC Or DC46
• 46345 - MR16 5 Watt LED 12V AC or DC GU5.3 Dimmable46
• 23125 - MR16 Three One Watt Ultra Bright LED Light 12 Volt AC/DC46
• 29475 - MR16 One by 3 Watt LED Light Bulb46
• 54684 - LED MR16 GX5.3 GU5.3 10 5050 SMT LEDs 12V AC/DC Dim-able 46
• 86797 - MR16 3x1.2 Watt LED Lights 12 Volt AC/DC46
• 94563 - MR16 LED Lamp 12V AC/DC 6 Watt 30 Deg Dimmable46
• 32432 - MR16 3 Watt Ultra Bright Low Voltage 12V AC/DC47
• 44324 - 3W MR16 Bulb LED 12 Volt AC or DC47
• 57463 - MR16 12 SMD 5050 3 Chip 8-30 VAC-VDC Dim-able47
• 64224 - MR16 GX5.3 GU5.3 18 LED Bulb 12V AC-DC Dim-able Lens47
• 94894 - MR16 4 Watt LED High Power 12V AC-DC 60 Deg G5.347
• 43442 - MR16 7 SMT LED Light 12 Volt AC/DC47
• 74633 - MR16 60 SMD 3528 LED Light Low Voltage 12 Volt47
• 95832 - MR16 5 Watt LED Light 12 Volt AC/DC48
• 45677 - MR16 GX5.3 GU5.3 5 Watt 12 Volt AC or DC48
• 54845 - LED MR16 3 Watt RGB Light 12VDC with Remote48
• 65945 - MR 16 60 SMD 3528 85-260VAC GU5.348
• 36823 - MR16 GX5.3 12 SMD 5050 12 Volt AC-DC48
• 15487 - MR16 3 Watt LED Light Remote Controlled48

• 23461 - Rebaydo 2pcs LED Module 5 SMD 5050 12 VDC 1.2 Watt IP6549
• 32967 - Drop Ship Fee49
• 96124 - Work Light Rechargeable 20 Watt49
• 45864 - Off Road, Work 48 Watt 9-30VDC IP67 Square49
• 58448 - Module 4 5050 3 Chip SMD 2 Side Mount Holes NCNR49
• 67834 - LED Off Road Light 60 Watt 10-30VDC 60 Watt 30 Deg Black IP67 Round49
• 15456 - LED Light Remote Control Battery Operated49
• 56946 - LED Trouble Light Rechargeable 10W House & Auto Charger 50
• 73853 - Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC50
• 43232 - Accent Light 3 Watt Low Voltage50
• 43535 - Recessed LED Fixture 12 VDC50
• 26435 - Module 3 LED 5630 SMD 12VDC 1.2 Watt IP6750
• 63456 - L.E.D. Electronic Display50
• 94875 - LED Shower Head Light Bulb, Red/Green/Blue based on Temperature50
• 23432 - 17" LED Light Bar 100W51
• 45896 - LED Module 5 SMD Plastic Waterproof 12 Volt DC NCNR51
• 46859 - LED Light, Spotlight, Fog Light, Day light Headlight Wire Kit51
• 58647 - 9 Watt LED Driving 10-30 Volt DC 3 by 3 Watt Spot Pair51
• 58976 - 3 5050 SMD LED Module 12VDC NCNR51
• 69369 - 3 3528 SMD Waterproof LED Module 12VDC Dimmable NCNR51
• 95464 - Module 3 LED 5630 0.72 Watt 12 Volt DC IP65 NCNR51
• 32434 - Flood Outdoor LED 10 Watt MCOB 12V AC/DC52
• 68976 - 2 3528 SMD Waterproof LED Module 12 VDC NCNRNW52
• 78474 - T6.5 Wedge 1 LED Round Top 12 Volt52
• 95456 - 3 Watt LED Indicator Panel Mount 12VDC Dimmable52
• 14221 - Tap Light LED Round Portable Battery Operated52
• 48778 - AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree52
• 85695 - LED Puck 10W Module 12 VDC Dimmable52
• 32569 - 4 3528 SMD Iron Shell Waterproof LED Module 12VDC 180 Beam NCNR53
• 57544 - Rebaydo 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch53
• 57878 - 1 LED Motion Sensor Lamp53
• 48565 - 9V Battery Connector Harness Female with Red and Black Wires53

• 36254 - Power Supply 60 Watt 12VDC Water proof 96-264VAC54
• 76334 - 200 Watt Power Supply 12V DC Input 88-132VAC54
• 65848 - Rebaydo Converter 6 Volt to 12 Volt 4 Amp54
• 65987 - Power Supply 12 VDC 24 Watt 2 Amp 100 to 240 VAC 54
• 44397 - Rebaydo Power Supply 12 VDC 50 Watt Output Voltage 85-265 VAC Input54
• 46756 - Water Proof 12 Volt DC LED Light Power Supply 10 Watts 54
• 73345 - 100 Watt Power Supply 12V54
• 96796 - 100W Waterproof Power Supply 12 VDC 100-240 VAC55
• 32896 - Rebaydo Power Supply 150 Watt Water Proof 170-250 VAC55
• 64574 - Power Supply 35 Watt 12VDC IP67 96-264VAC Waterproof55
• 23566 - Power Supply 350 Watt 12V DC Input 88-132VAC55
• 84756 - Rebaydo Power Supply 5 VDC 75 Watt 55
• 45836 - 24 Volt DC Power Supply 50 Watt55
• 97423 - Power Supply 12 Volt DC 50 Watt 85-265 VAC Input55

• 45864 - Off Road, Work 48 Watt 9-30VDC IP67 Square56
• 79567 - PAR38 Ultra Bright LED 12 VAC E26 NCNRNW 30 Degree56
• 67834 - LED Off Road Light 60 Watt 10-30VDC 60 Watt 30 Deg Black IP67 Round56
• 77540 - Rebaydo PAR38 10 Watt 12 Volt AC/DC E27 Diffused 120 View Dim-able NCNRNW56
• 45897 - Rebaydo PAR38 6 Watt LED Bulb Diffused 12 Volt AC/DC 30 Degree NCNRNW56
• 73853 - Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC56
• 87756 - Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW56
• 43232 - Accent Light 3 Watt Low Voltage57
• 45182 - LED Off Road, Driving Work Light 27 Watt 10-30VDC IP67 30 Deg Round57
• 69732 - Rebaydo PAR38 10 Watt 12 Volt AC or DC E27 Diffused 120 View Dim-able NCNRNW57
• 34155 - G4 3 Watt 64 LED 12V AC/DC Dimmable57
• 48677 - PAR 36 5 Watt 12 Volt AC or DC Diffused Screw Terminal G5357
• 73426 - MR11 6 SMD LED Low Voltage 12 Volt AC DC Dimmable57
• 23432 - 17" LED Light Bar 100W57
• 31218 - E27 PAR 16 Three One Watt Super Bright LED Light Bulb58
• 36242 - 18 Watt LED Driving Light, Work, Bike 9-32V DC 60 Beam58
• 58647 - 9 Watt LED Driving 10-30 Volt DC 3 by 3 Watt Spot Pair58
• 73534 - MR11 12 SMD (3 Chip) 12 Volt AC/DC GX4.0 Base58
• 95743 - MR11 9 SMD LED LIGHT Low Voltage 12 Volt AC/DC 58
• 32434 - Flood Outdoor LED 10 Watt MCOB 12V AC/DC58
• 75461 - E12 LED 2 Watt AC/DC 12 Volt Dimmable NCNRNW58
• 47659 - G4/GY6.35/JC 9 SMD 5050 (3 Chip) 360 LED Lighting 12V GX4.0 Base59
• 48778 - AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree59
• 85695 - LED Puck 10W Module 12 VDC Dimmable59
• 44232 - BA15D 3 Watt LED Light 12V AC-DC59
• 69897 - Rebaydo 50 Watt LED Flood Light 12V to 24V AC59
• 79642 - Rebaydo PAR 56 LED Light 12 Watt 12 Volt DC Screw Terminal G53 NCNRNW59
• 68412 - Rebaydo 20 Watt LED Flood Light 12 to 24 Volt AC59

• 34635 - G4 GY6.35 JC 18 SMD 3528 LED Lamp 12V DC G4 Base60
• 34754 - G4 GY6.35 6 SMD RGB Color Changing 12V AC or DC60
• 43243 - G4 GY6.35 JC Super Flux 4 12 Volt AC-DC60
• 45616 - G4 G6.25 JC 1.8 Watt 360 Degree 12 Volt AC-DC Dimmable60
• 68744 - G4 G6.25 JC 2 Watt MCOB 12V AC-DC60
• 34231 - G4 GY6.35 3.1 Watt DC10-30V AC10-18V Dimmable G460
• 65748 - G4 GY6.35 2 Watt AC or DC 12V Dimmable G460
• 84755 - G4 G6.25 JC 3 Watt 360 Degree 12 Volt AC-DC Dimable61
• 87944 - G4 LED 2 Watt 120 VAC 360 Viewing61
• 67645 - G4 GY6.35 LED 1 Watt Dimmable Low Profile 12V AC-DC61
• 98447 - G4 GY6.35 1.4 Watt LED Bulb 12V DC61
• 35263 - G4 Ultra Bright 6 SMD 12 Volt AC/DC61
• 43685 - G4 GY6.35 24 5050 SMD LED 360 Degree 12 VDC61
• 47654 - G4 GY6.35 JC 9 SMD 5050 3 Chip Forward Firing Low Voltage 12 V AC GX4.061
• 73853 - Clip Light 3 Watt LED Low Voltage 12 Volt AC or 12 Volt DC62
• 74375 - G4 GY6.35 JC 3 Watt Ceramic Shell 12V AC DC 360 Degree G462
• 87756 - Rebaydo 2pcs PAR16 Three 1 Watt LED Light 12 Volt AC-DC 30 Deg Dim-able NCNRNW62
• 43232 - Accent Light 3 Watt Low Voltage62
• 47569 - G4 JC GY6.35 9 SMD 1.8 Watt 12 Volt DC62
• 85529 - Ultra Bright G4 LED Bulb 9 SMD 12 Volt AC/DC Dim-able62
• 98884 - G4 GY6.35 1.85-Watt High Power LED 12V AC-DC 62
• 27341 - MR11 1 Watt High Power L.E.D. Bulb 12 V AC/DC Miniature Bi-Pin G4 Base63
• 73426 - MR11 6 SMD LED Low Voltage 12 Volt AC DC Dimmable63
• 48712 - G4 GY6.35 JC 16 (3 Chip) 5050 LED Bulb 12 Volt DC GX4.0 Base63
• 75845 - E14 4 5050 S.M.D. LED Light Bulb 12V AC/DC NCNRNW63
• 12476 - G4 JC GY6.35 LED Bulb 2 Watt Low Voltage GX4 BASE DC8-30VDC AC10-18V63
• 25623 - G4 GY6.35 JC 12V DC 360 Degree 5 SMD 505063
• 31218 - E27 PAR 16 Three One Watt Super Bright LED Light Bulb63
• 34567 - G4 GY6.25 JC 21 SMD 3528 LED Light Bulb 12V DC GX4.0 Base64
• 64523 - G4 GY6.35 JC 360 Degree 18 SMD 5050 12 VDC64
• 68544 - 3528 LED G4 Bulb 12V DC64
• 73534 - MR11 12 SMD (3 Chip) 12 Volt AC/DC GX4.0 Base64
• 95743 - MR11 9 SMD LED LIGHT Low Voltage 12 Volt AC/DC 64
• 65487 - G4 GY6.35 12 5050 SMD 3 Chip LED Dimmable64
• 78744 - G4 JC GY6.35 1.2 Watt 6 SMD LED 12V AC-DC64
• 53894 - G4 GY6.35 JC Super Bright 21 LED 12 Volt AC DC G465
• 85964 - G4 GY6.35 JC 3 SMD 5050 3 Chip LED 12V G4 Base65
• 87962 - G4 JC GY6.35 9 SMD Low Voltage 12 Volt DC Dimmable65
• 34534 - G4 GY6.35 JC 14 LED 12 Volt AC-DC65
• 45178 - G4 GY6.35 1.5-Watt High Power LED 12V AC-DC65
• 48778 - AR11 LED Light 6 Watt 12 Volt AC/DC 25 Degree65
• 85695 - LED Puck 10W Module 12 VDC Dimmable65
• 87467 - MR11 LED 2.5 Watt 10 to 30 Volts DC 120 Viewing66
• 54334 - G4 GY6.35 JC Ultra Bright 1 Watt LED 12 Volt AC DC G4 Base66
• 44232 - BA15D 3 Watt LED Light 12V AC-DC66
• 78643 - G4/JC/GY6.35 9 SMT (3 Chip) L.E.D. Side Firing LED Light 12VDC GX4.066
• 45674 - G4 9 SMD 1201 LED Bulb 12V66
• 18634 - G4 GY6.35 JC 24 SMD Ultra Bright 12V Dimmable66
• 72253 - G4 GY6.35 JC Super Flux 1 LED 12 Volt AC-DC G4 Base66

• 34563 - Rebaydo Tube Light 6" Led Low Voltage 12 Volt DC Plug & Switch67
• 69283 - Tube LED 12 Watt 12 Inch Switch & Plug 12 Volt DC 120 Degree67
• 68459 - T8 T12 4 Foot 18 Watt 12V to 36V AC DC G13 Power Both Ends NCNRNW67
• 89456 - 24 Inch L.E.D. Tube Switch & Plug 12 Volt DC67
• 48769 - 48 Inch Tube 12 Volt DC Switch Plug67
• 78448 - Tube T8 40 Watt 8 Foot 12-36 AC or DC G13 Power Both Ends NCNRNW67
• 68732 - T8 T12 3 Foot 13 Watt 12V to 36V AC DC G13 Power Both Ends NCNRNW67
• 58784 - T8 T12 2 Foot 10 Watt 12 to 36 Volt AC DC G13 Power Both Ends NCNRNW68
• 57544 - Rebaydo 10 LED Rail Light Bar 12V DC Surface Mount with On/Off Switch68
• 86478 - T8 Tube 2 Foot 12-36V AC or DC G13 Power on One End NCNRNW68

• 68713 - UVC Sterilizer For Cell Phone 260nm-280nm69