5050 LED Module Water Proof RGB Common Anode. Use this product to replace your tube lights or neon lights underneath the counter, or commercial signs. LEDs last a long time and low voltage 12 VDC. Puts out up to 65 lumens and only uses .12 mA of energy @ 13.8 volts. Comes equipped with a mounting hole in the center, colored wires in accordance to the LED color and a metal backing. This is a common anode product that must be used with our common anode controllers. Approximate size is 1.32in x 1.32in x .15in. The center to the mounting ears is 1.564". The hole diameter for the mounting ears is approximate .115". The center hole diameter is approximate.162". There are 4 wires that are yellow is common anode. Red is for red led's. Blue wire is for the blue led's and green wire is for the green led's. There are 20 modules for each wire that is approximately 87" length. The spacing between modules is approximately 4 3/8". The current for 13.8VDC applied is green 0.976A, Red .961A, blue 1.031A and for all 3 colors at the same time 2.670A. The connecting wire is approximately 20 AWG. Strings should be connected in parallel and not series.