Third brake light for 6 volt positive ground or negative ground vehicles. Up to 320 Lumen output for the brake light and up to 250 Lumen output for the taillight. Made with 50 quantity 3030 high output led chip's. The black wire is ground, the white wire is for taillight and the red wire is for brake light. If you do not want to use the taillight please just leave the white wire not connected. The length is 9" long and 3/8" wide. The flexible strip is rigid. The third brake light has some water resistant materials. Uses 113mA@6V for the taillight and 220mA@6V for brake light. The approximate power consumption is up to 1.2 Watts for brake light and up to .8 Watts for tail light. Comparable to a 10-15 Watt incandescent bulb. Easy to install just connect the black wire to your vehicle ground, connect the white wire to your taillight and connect the red wire to your brake light. Can be mounted using silicon on the back side or make up your own brackets to hold the third brake light. Should be mounted on a flat surface or a small radius surface. CE and Rohs.