Third brake light for 6 Volt positive ground or negative ground vehicles, motorcycles or scooters. The LED third brake light has both taillight and brake light dual filament. The third brake light is 9" long and 3/8" wide. Great for older classic and vintage cars, trucks and motorcycles. The led third brake light has 3 wires, black if for ground positive or negative ground, yellow or white for taillight and red for brake light. The wire is 22 AWG gauge stranded. The wire is about 3.5" long. The light is flexible so it can be mounted on a curved or flat surface. Since some old vintage and classic cars have only one brake light this can be the second or third led brake light. Available in Red 625nm. There are 14 5050 led's, each led outputs about 22 Lumens for up to 308 Lumen output. The viewing angle is 120 degrees. .220A@6V for brake light and .077A@6V for taillight. Each led has 3 chips so it is brighter. Double sided tape is included so you can attach this brake light to your vehicle. Can be used as a turn signal. The flexible strip starts to illuminate at 3.5 volts. CE and Rohs.