Actual Product may vary from picture shown.
One product per package unless otherwise stated.
View Larger Photo

GX24 4 Pin male to E26 female Converter

Average Customer Rating
5.0 out of 5 stars with 6 reviews 5.0 out of 5  
6Customer Reviews
5 Star: 100% 6
4 Star: 0% 0
3 Star: 0% 0
2 Star: 0% 0
1 Star: 0% 0

Product Code: 15485

Price : $3.19 - $3.99
  Volume Price Information  
 Buy 2 or more and pay $3.91 each (save 2.00%) 
 Buy 4 or more and pay $3.87 each (save 3.00%) 
 Buy 6 or more and pay $3.79 each (save 5.00%) 
 Buy 8 or more and pay $3.71 each (save 7.00%) 
 Buy 10 or more and pay $3.59 each (save 10.0%) 
 Buy 25 or more and pay $3.39 each (save 15.00%) 
 Buy 100 or more and pay $3.19 each (save 20.0%) 
Qty:Add To Cart
Warranty: 12 Months

Availability : In Stock


4 pin socket adapter, this Gx24 4 Pin is L.E.D. common base so it fits all GX24Q sockets. Very low profile, the main part of the GX24Q is 15 mm. CE and Rohs listed. Up to 250 VAC@ 2 amps for a total for 500 watts of rated power. GX24Q-1, GX24Q-2, Gx24Q-3, GX24Q-4. The starter and/or ballast will need to be bypassed if using a LED light, incandescent or a Ballasted CFL in the fixture. Gx24 base has a shorter ledge than G24 base the GX24Q means 4 pins. Traditional G24 and GX24q fluorescent plug and HPS converters save money, time and labor versus replacing the CFL fixture. Can I use a GX24 base plug into the existing G24 fitting ? The answer is no. Are they interchange sockets ? The answer is NO they are not interchangeable converter sockets. The LED common base fits all GX24Q socket regardless of the notches/keying tabs, because the socket does not have any keying tabs so it fits in all GX24Q 4 Pin sockets. Made of flame retardant PBT and copper materials. This converter/adapter works with Edison Medium base E26/E27 based male bulbs rated up to 500 watts. The GX24Q 4 pin is called the USA base. Please Note: You will need to BYPASS the BALLAST in your SYSTEM for this converter to work properly. Please measure middle post BEFORE buying this converter it should be 15 mm or .59 inches or approximately 9/16 inch. Please use a certified electrician to disable any existing external ballast. Fits both a E26 or E27 socket
6 Customer Reviews
5 Star: 100% 6
Average Customer Rating
5.0 out of 5 stars with 6 reviews 5.0 out of 5
100% recommend it to friends
4 Star: 0% 0
3 Star: 0% 0
2 Star: 0% 0
1 Star: 0% 0
Viewing 1-5 of 6 Reviews.    Page 1 of 2.1 2>
Featured Review
5 out of 5 stars GX24 4 Pin male to E27 female Converter
by from San Diego Area on 4/10/2016
Recommends it to Friends: Yes
This is the 4th time ordering these items. The product worked well for converting 4-pin CFL socket to E26-E27 socket for use with LED retrofits (make sure to bypass the ballast otherwise it will not work). LEDLight.com is a reliable vendor and shipping cost is fair and convenient.
Was this review helpful to you? YES / NO
Featured Review
5 out of 5 stars Great solution
by from Fairfield, CA on 9/8/2015
Recommends it to Friends: Yes
Based on reading another review, I ordered these to change out all the can lights in my kitchen. Although I did have to remove the ballast from each fixture, putting the adapter in with a 65W BR40 LED equivalent gave me exactly the result I was looking for. It also means I will have a much wider choice of bulbs in the future. Although the E27 threading is a European standard(American standard is E26) the American-made LEDs I bought worked just fine in the adapter. I am thoroughly pleased with the result.
1 of 1 user found this review helpful. Was this review helpful to you? YES / NO
Featured Review
5 out of 5 stars Perfect fit in a Panasonic WhisperLite exhaust fan
by from SF Bay Area, CA. on 8/22/2015
Recommends it to Friends: Yes
I have a video review of this adapter on YouTube: https://youtu.be/7CSF7Yoxgf0 Using this to add an LED bulb to replace the CFL that came in this bathroom exhaust fan, ceiling light combo unit. This adapter allows a wider range of bulb options that I get in a GX24 LED bulb.
1 of 1 user found this review helpful. Was this review helpful to you? YES / NO
Featured Review
5 out of 5 stars Works just as advertised
by from American Canyon, CA on 2/19/2015
Recommends it to Friends: Yes
I bought nine of these to convert my GX24Q-3 bulbs (in my kitchen) to LED retrofit kits I purchased from Costco. As instructed, I bypassed the ballast, which wasnt too difficult. The process should be relatively easy for anyone with technical prowess. After rewiring the connections, and installing the LED kit, everything powered on immediately. Shipping was quick and the adapters were packaged very well. Im purchasing more adapters so I can do the same install for my parents. Thank you LEDLight.com!
Was this review helpful to you? YES / NO
5 out of 5 stars 4 pin adapter works great
by from Hemet, Ca. on 1/22/2015
Recommends it to Friends: Yes
I just recieved one of these gx24 adapters and installed it in a flush mount Florescent can light and bypassed the Ballast so I could use A standard screw base for led bulbs. This 4 pin adapter works great and Im going to order about 20 more. Led.com shows pictures and dimensions of the connectors. The connectors easily plug in but the work is in bypassing the ballast and rewiring.
1 of 1 user found this review helpful. Was this review helpful to you? YES / NO
Viewing 1-5 of 6 Reviews.    Page 1 of 2.1 2>
  Recommended Items:  
 
 
 
G24 4 Pin male to E26 female Converter Adapter G24Q
Product Code: 43568
Price: $3.99Quantity Pricing Available
 
G24q 4pin (male) to E26/E27(female) Adapter/Converter. Measure existing bulbs middle post BEFORE buying this converter to ensure proper fit. Converts your G24q 4-pin to an E26 so you can use your LED or incandescent bulbs. G24Q-1, G24Q-2, G24Q-3 base.
 
 
 
 
 
 
GX23 2 Pin male to E27 female Converter
Product Code: 12353
Price: $3.99Quantity Pricing Available
 
GX23D 2 Pin male GX23D to E27 female adapter. Rated 500 watts, 250VAC, 2 Amps. CE and Rohs listed. Made of Flame retardant PBT + Copper, LED common base fits both GX23D and GX23D-2. The GX23D 2 pin has two notches on the middle post.
 
 
 
 
 
 
G24 2 Pin male to E27 female Converter
Product Code: 32465
Price: $3.99Quantity Pricing Available
 
G24 2 pin male base to E27 female medium base converter or adapter. Use a E27 bulb in an G24 2 pin socket fixture. Up to 2 amps. Rated voltage is 250 volts. Rated power is 500 watts. CE, Rohs approved. The converter fits g24d-1, g24d-2, g24d-3 sockets.
 
 
 
 
 
 
G23 2 Pin male to E27 female Converter Adapter
Product Code: 76575
Price: $3.99Quantity Pricing Available
 
Use this G23 2 Pin male 2 pins adapter to E27 female Converter. Great to use on LED Bulbs or CFL or fluorescent lighting. CE, Rohs certifications. The socket is LED common base which fits both G23 and G23-2 sockets
 
 
 
 
 
 
GX24 2 Pin male to E27 female Converter
Product Code: 28374
Price: $3.99Quantity Pricing Available
 
GX24D 2 Pin (male) to E26/E27 converter adapter. Made of PBT, copper and plastic materials. CE, ROHS listed. This is a led common base converter fits GX24D-1, GX24D-2, GX24D-3. Rated 2 amps, 250 VAC, 500 watts. Save time and money using a converter.
 
 
 
 
 
 
E27 male To G24 4 Pin female Converter
Product Code: 24757
Price: $3.99Quantity Pricing Available
 
E26/E27 (Male) To G24 (Female) Converter CE ROHS UL. Use this adapter to convert a E27 Edison screw base to G24 4 pin female. Flame retardant PBT and copper.