6 Ohm 50 Watt 3157 B Type Inline Load Equalizer

Fixes CAN bus errors and eliminates hyper flashing and fix CAN bus errors for dual filament 3157 led bulbs. Works from 6 Volt to 12 Volt positive ground or negative ground. Can handle up to 4 Amps per filament so a total of 8 Amps. Includes two 50 Watt load equalizers for long life and cooler operation. This is the 3157B type socket that has 3 tabs. Load equalizers get warm or hot to the touch so please mount the equalizers to a metal body to help reduce heat. The harness is about 10" long. The harness is made of both 14awg and 18awg wires. The harness insulation nearest the load equalizer is made of heat resistant materials. The load equalizer is made of aluminum materials. Both filaments are equalized to eliminate fast flashing or ODBC errors. Plug and play installation just remove the led bub and insert into the inline load equalizer then insert the inline load equalizer into the led bulb socket. No crimping or soldering required. The operating temperature is approximately 100 degrees Celsius. The load equalizer body length is 2.16". The load equalizer body screw center to center slot is 1.30". The load equalizer body width is 1.57". The load equalizer body screw mounting slot length is 0.78". The load equalizer body screw mounting slot width is 0.13". The load equalizer body height is 0.72".