LED Compatible flasher. This 2 prong round flasher can handle up to 150 Watts of led or incandescence bulbs. 1 to 6 Bulbs. Each incandescent bulb is around 21 Watts. The flasher will flash between 60 and 120 Hz. The flasher can power from 0.1 Watt to 150 Watts of lighting. Operating Voltage from 11 Volts DC to 15 Volts DC. The duty cycle of this flasher can range from 30% to 70%. The operating temperature from -40C to +80C. The flashers life time is up to 400 hours of flashing time. The flashers body is round. Plug and play disconnect power remove old flasher and install new flasher reconnect power. Very easy to eliminate hyper flashing by replacing your old flasher with this LED compatible flasher. The flasher terminals are L for load and B for positive voltage. Please make sure to connect the anode of your LED bulb to the flasher. Please connect the cathode of our led bulb to ground. The flasher will click like your old flasher so you will not notice a difference after you install your led compatible flasher. The diameter is 1.33 inches. The height is 1.06 inches.
The 69658 flasher is compatible with:
If replacing Ideal 552 you must reverse the wiring
EATON BUSSMAN 224 323 536 552
SIGNAL STAT 144 536 552
TRUCK LITE 536 552
ECHLIN 536 552